• Atmosphere
• /
• v.21 no.3
• /
• pp.243-256
• /
• 2011

This paper presents the development of new algorithm for identifying and tracking the convective cells in three dimensional reflectivity fields in Cartesian coordinates. First, the radar volume data in spherical coordinate system has been converted into Cartesian coordinate system by the bilinear interpolation. The three-dimensional convective cell has then been identified as a group of spatially consecutive grid points using reflectivity and volume thresholds. The tracking algorithm utilizes a fuzzy logic with four membership functions and their weights. The four fuzzy parameters of speed, area change ratio, reflectivity change ratio, and axis transformation ratio have been newly defined. In order to make their membership functions, the normalized frequency distributions are calculated using the pairs of manually matched cells in the consecutive radar reflectivity fields. The algorithms have been verified for two convective events in summer season. Results show that the algorithms have properly identified storm cells and tracked the same cells successively. The developed algorithms may provide useful short-term forecasting or nowcasting capability of convective storm cells and provide the statistical characteristics of severe weather.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.1
• /
• pp.97-103
• /
• 2012

In this paper, we propose a novel voice activity detection (VAD) algorithm to effectively distinguish speech from nonspeech in various noisy environments. Global speech absence probability (GSAP) derived from likelihood ratio (LR) based on the statistical model is widely used as the feature parameter for VAD. However, the feature parameter based on conventional GSAP is not sufficient to distinguish speech from noise at low SNRs (signal-to-noise ratios). The presented VAD algorithm utilizes GSAP based on Teager energy (TE) as the feature parameter to provide the improved performance of decision for speech segments in noisy environment. Performances of the proposed VAD algorithm are evaluated by objective test under various environments and better results compared with the conventional methods are obtained.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.1
• /
• pp.203-210
• /
• 2017

Companies are pursuing the management of small quantity batch production or JIT(Just-in-time) system for improving the delivery response and LOB(Line Balancing) in order to satisfy consumers' increasing demands in the current global economic recession. And in order to improve the growth of production for reducing manufacturing cost, improvements of the Load Balancing have become an important reformation factor. Thus this paper is aimed at warehouse which procures materials on the assembly line in procurement logistics of automotive logistics and proceed with research on heuristic algorithm development which can increase the Load Balancing of workers. As a result of this study, when applied the primary target value, it was verified that the whole workers decreased from 28 to 24. Furthermore, when specified the secondary target value and applied algorithm once more, it was verified that the Load Balance Ratio was improved from 44.96% to 91.7%.

• Coupled systems mechanics
• /
• v.3 no.2
• /
• pp.171-193
• /
• 2014

The dynamic characterization is important in making accurate predictions of the seismic response of the hybrid structures dominated by different damping mechanisms. Different damping characteristics arise from the construction of hybrid structure with different materials: steel for the upper part; reinforced concrete for the lower main part and interaction with supporting soil. The process of modeling damping matrices and experimental verification is challenging because damping cannot be determined via static tests as can mass and stiffness. The assumption of classical damping is not appropriate if the system to be analyzed consists of two or more parts with significantly different levels of damping. The dynamic response of structures is critically determined by the damping mechanisms, and its value is very important for the design and analysis of vibrating structures. A numerical algorithm capable of evaluating the equivalent modal damping ratio from structural components is desirable for improving seismic design. Two approaches are considered to explore the dynamic response of hybrid tower of cable-stayed bridges: The first approach makes use of a simplified model of 2 coupled lumped masses to investigate the effects of subsystems different damping, mass ratio, frequency ratio on dynamic characteristics and equivalent modal damping; the second approach employs a detailed numerical step-by step integration procedure.

• Journal of the Korean Society of Visualization
• /
• v.20 no.1
• /
• pp.11-17
• /
• 2022

Among the various factors that cause the performance decrease of heat exchangers used in many industries, flow path blocking is one of the important and serious factor. In order to solve this problem, proper maintenance and management of the heat exchanger is important and emphasized. In this study, we developed and algorithm that can quantitatively determine and diagnose the normal and blocked areas of fin-tube heat exchanger using pattern analysis, Gaussian Edge Detection, Image Processing and Affine Transformation techniques. The developed algorithms was applied to the actual heat exchanger and the performance was evaluated by comparing with the manual results. From these results, it was proved that the developed algorithm is effective in evaluating the pollution ratio of the fin-tube heat exchanger.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.3
• /
• pp.139-143
• /
• 2023

The product portfolio problem(PPP) is an optimization problem that determines the production quantity of a particular product to obtain the maximum profit among the n products. Linear programming(LP) is known as the only way to solve this optimization problem. The linear programming method is a problem that optimizes n linear functions and uses LINGO or Excel solver. This paper proposes a simple algorithm that uses CPR, a product cost-profit ratio, to sort in CPR descending order and then determines the maximum allowed production quantity by hand as the actual production quantity. As a result of applying the proposed algorithm to six experimental data, it was shown that more accurate results can be obtained compared to the linear programming method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.1
• /
• pp.63-68
• /
• 2017

This paper reviews the learning model of a forward slip ratio in order to improve the mass-flow stability and strip qualities in the hot strip finishing mill process. Firstly, it is shown, from mathematical analysis, that the significant parameters of the forward slip ratio are the tension, looper angle, and roll velocity. Secondly, a discrete-time learning model of the forward slip ratio is proposed from these parameters, which is identified by an instrumental variable (IV) identification algorithm. Finally, it is shown from computer simulation that the proposed learning model is more effective than the existing learning model.

• Journal of Platform Technology
• /
• v.10 no.4
• /
• pp.70-81
• /
• 2022

In this paper, we proposed a Virtual Machine Placement (VMP) method to provide live vertical scaling services for cloud resources. Since free space on the physical server must be secured in advance for vertical scaling, a "general-mixed-vertical" mode conversion algorithm based on the FirstFit placement strategy that variably adjusts the allocation ratio of virtual servers to physical servers for this purpose is presented. Simulations were performed using parameters such as vertical scaling ratio, virtualization ratio, and free resource ratio. When the vertical scaling ratio is 50%, considering free space, 150% of resources are required as a whole, but simulation results of the proposed algorithm show that only up to 125% of free space is required.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.297-300
• /
• 2000

This paper proposes a high-speed and area-efficient FFT algorithm and performs a hardware implementation. This algorithm, named by “Radix-4/2”, uses the feature of existing radix-2$^3$algorithm, It reduces the number of non-trivial multipliers in SFG to the ratio of 3 to 2 campared with radix-2 or radix-4 algorithm and radix-4/2 has also twice throughput as radix-2$^3$algorithm's. It is proved that FFT processor using the proposed algorithm and 64-point MDC pipeline architecture has twice throughput as radix-2$^3$algorithm's, and reduces areas by 25 percentages in contrast to radix-4 algorithm's.

• Journal of Korean Institute of Industrial Engineers
• /
• v.14 no.2
• /
• pp.25-40
• /
• 1988

In this paper, a unified method to construct a quadratically convergent algorithm with one dimensional search schemes is described. With this method, a generalized algorithm is derived. As it's particular cases, three quadratically convergent algorithms are performed. They are the rank-one algorithm (Algorithm I), projection algorithm (Algorithm II) and the Fletcher-Reeves algorithm (Algorithm III). As one-dimensional search schemes, the golden-ratio method and dichotomous search are used. Additionally, their computer programming is developed for actual application. The use of this program is provided with the explanation of how to use it, the illustrative examples that are both quadratic and nonquadratic problems and their output. Finally, from the computer output, each algorithm was analyzed from the standpoint of efficiency for performance.