• Journal of Korea Water Resources Association
• /
• v.56 no.4
• /
• pp.235-243
• /
• 2023

Due to the revision of the River Act and the enactment of the Act on the Investigation, Planning, and Management of Water Resources, a regular bed change survey has become mandatory and a system is being prepared such that local governments can manage water resources in a planned manner. Since the topography of a bed cannot be measured directly, it is indirectly measured via contact-type depth measurements such as level survey or using an echo sounder, which features a low spatial resolution and does not allow continuous surveying owing to constraints in data acquisition. Therefore, a depth measurement method using remote sensing-LiDAR or hyperspectral imaging-has recently been developed, which allows a wider area survey than the contact-type method as it acquires hyperspectral images from a lightweight hyperspectral sensor mounted on a frequently operating drone and by applying the optimal bandwidth ratio search algorithm to estimate the depth. In the existing hyperspectral remote sensing technique, specific physical quantities are analyzed after matching the hyperspectral image acquired by the drone's path to the image of a surface unit. Previous studies focus primarily on the application of this technology to measure the bathymetry of sandy rivers, whereas bed materials are rarely evaluated. In this study, the existing hyperspectral image-based water depth estimation technique is applied to rivers with vegetation, whereas spatio-temporal hyperspectral imaging and cross-sectional hyperspectral imaging are performed for two cases in the same area before and after vegetation is removed. The result shows that the water depth estimation in the absence of vegetation is more accurate, and in the presence of vegetation, the water depth is estimated by recognizing the height of vegetation as the bottom. In addition, highly accurate water depth estimation is achieved not only in conventional cross-sectional hyperspectral imaging, but also in spatio-temporal hyperspectral imaging. As such, the possibility of monitoring bed fluctuations (water depth fluctuation) using spatio-temporal hyperspectral imaging is confirmed.

• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.426-438
• /
• 2023

Lithium-sulfur batteries, recently attracting attention as next-generation batteries, have high energy density but are limited in application due to sulfur's insulating properties, shuttle phenomenon, and volume expansion. This study used an economical and simple vacuum filtration method to prepare a freestanding electrode without a binder and collector. Carbon nanotubes (CNTs) are used to improve the electrical conductivity of sulfur, where CNT also acts as both collector and conductor. In addition, metal oxides (MO_x, M=Ni, Mg), which are easy to adsorb lithium polysulfide, are added to the CNT/S electrode to suppress the shuttle reaction in lithium-sulfur batteries, which is a result of suppressing the loss of active sulfur material due to the excellent adsorption of lithium polysulfide by metal oxides. The MO_x@CNT/S electrode exhibited higher capacity characteristics and cycle stability than the CNT/S electrode without metal oxides. Among the MO_x@CNT/S electrodes, the NiO@CNT/S electrode displayed a high discharge capacity of 780 mAh g^-1 at 1 C and an extreme capacity decrease to 134 mAh g^-1 after 200 cycles. Although the MgO@CNT/S electrode exhibited a low discharge rate of 544 mAh g^-1 in the initial cycle, it showed good cycle stability with 90% of capacity retention up to 200 cycles. Further, to achieve high capacity and cycle stability, the Ni_0.7Mg_0.3O@CNT/S electrode, mixed with Ni:Mg in the ratio of 0.7:0.3, manifested an initial discharge rate of 755 mAh g^-1 (1 C) and a capacity retention rate of more than 90% after 200 cycles. Therefore, applying binary metal oxides to CNT/S provides a freestanding electrode for developing economical and high-performance Li-S batteries, effectively improving lithium polysulfide's high capacity characteristics and dissolution.

• Analytical Science and Technology
• /
• v.22 no.4
• /
• pp.285-292
• /
• 2009

It has been observed that, after long term storage, some ammunitions are misfired by tamping (combustionstopping) due to aging of the chemicals loaded in the ammunitions. Used in ammunitions are percussion powder which provides the initial energy, igniter which ignites the percussion powder, and a delay system that delays the combustion for a period of time. The percussion powder is loaded first, followed by the igniter and then the delay system, and the ammunitions explode by the energy being transferred in the same order. Tamping occurs by combustion-stopping of the igniter or insufficient energy transfer from the igniter to the delay system or the combustion-stopping of the delay system, which are suspected to be caused by low purity of the components, inappropriate mixing ratio, size distribution of particulate components, type of the binder, blending method, hydrolysis by the humidity penetrated during the long term storage, and chemical changes of the components by high temperature. Goal of this study is to find the causes of the combustion-stopping of the igniter and the delay system of the ammunitions after long term storage. In this study, a method was developed for testing of the combustion-stopping, and the size distributions of the particulate components were analyzed with field-flow fractionation (FFF), and then the mechanism of chemical change during long term storage was investigated by thermal analysis (differential scanning calorimetry), XRD (X-ray diffractometry), and XPS (X-ray photoelectron spectroscopy). For the ignition system, M (metal)-O (oxygen) and M-OH peaks were observed at the oxygen's 1s position in the XPS spectrum. It was also found by XRD that $Fe_3O_4$ was produced. Thus it can be concluded that the combustion-stopping is caused by reduction in energy due to oxidation of the igniter.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6C
• /
• pp.395-406
• /
• 2006

Drilled shafts are a common foundation solution for large concentrated loads. Such piles are generally constructed by drilling through softer soils into rock and the section of the shaft which is drilled through rock contributes most of the load bearing capacity. Drilled shafts derive their bearing capacity from both shaft and base resistance components. The length and diameter of the rock socket must be sufficient to carry the loads imposed on the pile safely without excessive settlements. The base resistance component can contribute significantly to the ultimate capacity of the pile. However, the shaft resistance is typically mobilized at considerably smaller pile movements than that of the base. In addition, the base response can be adversely affected by any debris that is left in the bottom of the socket. The reliability of base response therefore depends on the use of a construction and inspection technique which leaves the socket free of debris. This may be difficult and costly to achieve, particularly in deep sockets, which are often drilled under water or drilling slurry. As a consequence of these factors, shaft resistance generally dominates pile performance at working loads. The efforts to improve the prediction of drilled shaft performance are therefore primarily concerned with the complex mechanisms of shaft resistance development. The shaft resistance only is concerned in this study. The nature of the interface between the concrete pile shaft and the surrounding rock is critically important to the performance of the pile, and is heavily influenced by the construction practices. In this study, the influences of asperity characteristics such as the heights and angles, the strength characteristics and elastic constants of surrounding rock masses and the depth and length of rock socket, et. al. on the shaft resistance of drilled shafts are investigated from elasto-plastic analyses( FLAC). Through the parametric studies, among the parameters, the vertical stress on the top layer of socket, the height of asperity and cohesion and poison's ratio of rock masses are major influence factors on the unit peak shaft resistance.

• The Korean Journal of Medicine
• /
• v.94 no.1
• /
• pp.96-106
• /
• 2019

Background/Aims: It is well known that gender differences are associated with clinical outcomes in patients with acute myocardial infarction (AMI). However, it is not clear whether gender differences affect the prognosis of elderly patients with AMI. Methods: We analyzed the incidence of in-hospital complications and mortality in the Korea Acute Myocardial Infarction Registry-National Institutes of Health from November 2011 to June 2015. This study included elderly patients (≥ 75 years) diagnosed with AMI. Results: A total of 2,953 patients were eligible for this study. Among them, 1,529 (51.8%) patients were female, and the mean age of the female group was older than that of the male group (80.7 ± 4.4 vs. 79.6 ± 4.0 years, respectively, p < 0.001). Elderly females utilized emergency medical services less frequently compared with elderly males (11.5 vs. 15.4%, respectively, p < 0.001). Elderly female AMI patients had a similar rate of in-hospital mortality compared with elderly males (7.1 vs. 8.4%, respectively, p = 0.196). The rate of major cardiac adverse events (MACEs) was lower in elderly females than males during a 12-month follow-up (hazard ratio [HR] 1.19, 95% confidence interval [CI] 1.00-1.41, p = 0.045). According to multivariate analysis, the male gender is an independent factor for predicting 1-year MACEs (HR 1.37, 95% CI 1.14-1.65, p < 0.001). Conclusions: No significant differences in peri-procedural complications or in-hospital mortality were observed between male and female elderly patients with AMI. However, elderly female patients had a more favorable prognosis than male patients during a 1-year clinical follow-up.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.3
• /
• pp.121-133
• /
• 2023

The purpose of this study was to improve weed management systems under varying carbon dioxide concentrations and temperatures by evaluating the growth of Acalypha australis and observing the efficacy of four foliar and four soil herbicides, as well as measuring phytotoxicity in soybean crops treated with these herbicides. In both growth chamber and greenhouse conditions, plant height and shoot fresh weight of Acalypha australis increased as temperature increased. The variable to maximum fluorescence ratio (Fv/Fm), relative electron transport rate (ETR), plant height, leaf area, and shoot fresh weight of Acalypha australis were higher at carbon dioxide concentrations of 800 ppm than at 400 ppm. The efficacy of a foliar herbicide, glufosinate, on Acalypha australis was lower at 30℃ than at 20℃ and 25℃ in the growth chamber condition and was also lower at 29℃ than at 21℃ and 25℃ in greenhouse conditions. In contrast, mecoprop efficacy on Acalypha australis was lower at 20℃ and 25℃ than at 30℃ in growth chamber conditions and lower at 21℃ and 25℃ than at 29℃ in greenhouse conditions. Glyphosate efficacy was lower at 21℃ than at 25℃ and 29℃ under greenhouse conditions. With soil herbicides, metolachlor and ethalfluraline, efficacies were higher at relatively high temperatures under both growth chamber and greenhouse conditions. However, in the case of linuron, the difference in efficacy was not observed under varying temperatures in both growth chamber and greenhouse conditions. When ¼ of the recommended glyphosate rates were applied to Acalypha australis, efficacy was lower under 800 ppm carbon dioxide concentrations than under 400 ppm. In contrast, when ¼ of the recommended rate of bentazone was applied to Acalypha australis, efficacy was higher under 800 ppm carbon dioxide concentrations than under 400 ppm. Despite application rates, glufosinate efficacy differed insignificantly under different carbon dioxide concentrations. When applied at ¼ of the recommended rate, the efficacy of ethalfuralin was higher under 800 ppm carbon dioxide concentrations than under 400 ppm. However, efficacies of other herbicides were not different despite varying carbon dioxide concentrations. Soybean phytotoxicity in crops treated with the recommended rate and twice the recommended rate of soil herbicides was not significantly different regardless of temperature and carbon dioxide concentrations. Overall, weed efficacy of some herbicides decreased in response to different temperatures and carbon dioxide concentrations. Therefore, new weed management methods are required to ensure high rates of weed control in conditions affected by climate change.

• Health Policy and Management
• /
• v.34 no.2
• /
• pp.141-155
• /
• 2024

Background: This study aimed to identified the relationship between the risk of obstructive sleep apnea, subjective health, and health-related quality of life among the middle-aged and elderly population in Korea. Methods: Adults aged 40 or older were extracted from the total 22,559 respondents to the 2019-2020 Korea National Health and Nutrition Examination Survey VIII, and secondary analysis was conducted on a total of 6,659 middle-aged and elderly people with no missing values. Logistic regression analysis and multiple regression analysis were conducted to examine the relationship between obstructive sleep apnea risk factors and subjective health as well as quality of life. Results: The subjective health status decline in the high-risk group compared to the non-risk group for obstructive sleep apnea was statistically significantly higher, with an odds ratio of 1.84 (p<0.001). The health-related quality of life was also statistically significantly lower by 0.02 points (β, -0.02; p<0.001). As a result of subgroup analysis on specific variables, the association between the risk of obstructive sleep apnea and subjective health and health-related quality of life was statistically significant depending on gender, sleep time, presence of depression, household income, and number of household members. Based on the obstructive sleep apnea risk group, women had a higher correlation with low subjective health and lower health-related quality of life scores than men. Sleeping time of more than 8 hours or less than 6 hours was more associated with low subjective health and lower health-related quality of life score than sleeping time of 6-8 hours. Patients with depression were more likely to have low subjective health than those without depression. The lower the household income level and the smaller the number of household members, the higher the association with low subjective health and the lower the health-related quality of life score. Conclusion: It is essential to recognize that the risk of obstructive sleep apnea not only directly affects sleep disorders but also impacts individuals' subjective health and quality of life. Consequently, social support and education should be provided to raise awareness of this issue. Particularly, programs for preventing and managing obstructive sleep apnea should target vulnerable groups such as women, individuals in single-person households, low household income, and those with depression, aiming to improve their subjective health and quality of life.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.40 no.2
• /
• pp.46-54
• /
• 2024

Purpose: The purpose of this study was to compare the periodontal status of end-stage renal disease patients undergoing dialysis and referred for intraoral evaluation prior to renal transplantation surgery with those having normal kidney function. Materials and Methods: Patients who had been undergoing dialysis for end-stage renal disease and been referred to the Dental Clinic Center by the Department of Nephrology at University Hospital for intraoral evaluation prior to kidney transplantation surgery. For comparison of periodontal status, subjects without abnormalities in kidney function were matched with the patients by age and gender and selected as healthy controls. The patients' age, gender, comorbidities, type of dialysis received, and duration of dialysis were investigated by reference to their medical records, and data on their periodontal status were analyzed via the relevant periodontal records. Results: A total of 102 patients, including 51 dialyzed patients and 51 healthy control group subjects, participated in this study. In the patients with end-stage renal disease undergoing dialysis with periodontal probing depth of 5 mm or more, percentage of sites with clinical attachment level of 4 mm or more, percentage of teeth with bleeding on probing, number of missing teeth, and ratio of moderate to severe periodontitis were all significantly greater than in the healthy controls. Conclusion: The periodontal status of end-stage renal disease patients undergoing dialysis and referred for intraoral evaluation prior to kidney transplantation was worse than that of healthy controls.

• Journal of the Korean Society of Radiology
• /
• v.85 no.3
• /
• pp.566-578
• /
• 2024

Purpose This study investigated whether the respiratory phase during pleural puncture in CT-guided percutaneous transthoracic needle biopsy (PTNB) affects complications. Materials and Methods We conducted a retrospective review of 477 lung biopsy CT scans performed during free breathing. The respiratory phases during pleural puncture were determined based on the table position of the targeted nodule using CT scans obtained during free breathing. We compared the rates of complications among the inspiratory, mid-, and expiratory respiratory phases. Logistic regression analysis was performed to control confounding factors associated with pneumothorax. Results Among the 477 procedures, pleural puncture was performed during the expiratory phase in 227 (47.6%), during the mid-phase in 108 (22.6%), and during the inspiratory phase in 142 (29.8%). The incidence of pneumothorax was significantly lower in the expiratory puncture group (40/227, 17.6%; p = 0.035) and significantly higher in the mid-phase puncture group (31/108, 28.7%; p = 0.048). After controlling for confounding factors, expiratory-phase puncture was found to be an independent protective factor against pneumothorax (odds ratio = 0.571; 95% confidence interval = 0.360-0.906; p = 0.017). Conclusion Our findings suggest that pleural puncture during the expiratory phase may reduce the risk of pneumothorax during image guided PTNB.

• The Journal of Internal Korean Medicine
• /
• v.45 no.3
• /
• pp.335-341
• /
• 2024

Objectives: Patients with cancer eventually fail to respond to therapy when malignant cells develop effective ways to evade immunosurveillance. Conventional cancer treatments, such as radiation therapy and chemotherapy, aim to cure the disease or prolong the patient's life. However, the toxicity and side effects of conventional treatments limit their efficacy. Herbal medicine is a typical complementary and integrative form of medicine for cancer treatment in Asia. This protocol evaluates the effectiveness of herbal medicines in improving the immune function of patients with cancer. Methods: The following electronic databases will be searched: MEDLINE via PubMed, EMBASE via Elsevier, Cochrane Central Register of Controlled Trials, China National Knowledge Infrastructure (CNKI), and Korean databases including Regional Information Sharing Systems (RISS), National Digital Science Library (NDSL), and Oriental Medicine Advanced Searching Integrated System (OASIS). Additionally, prospective randomized controlled trials that evaluate the effectiveness of herbal medicines on immune function in patients with cancer will be included in this review. All outcomes related to the immune function of patients with cancer (e.g., CD3, CD4, CD8, CD4/CD8 ratio, CD19 (B cells), dendritic cells (CD11), CD56 (NK cells), and macrophages) will be included in this review. Results: This review is expected to provide data on the effectiveness of herbal medicines on improving immune functions in patients with cancers. Conclusion: This systematic review will help patients and clinicians establish new management options for cancer treatment.