• Geotechnical Engineering
• /
• v.9 no.3
• /
• pp.49-60
• /
• 1993

The compatibility of chemicals in the leachates with the three natural and artificially -made liner materials is analyzed by performing the laboratory hydraulic conductivity test. The selected liner materials are natural marine clay, fly ash and weathered granitic soil stomped from Kimpo Wastefills, Seochon power plant and Mansu Dong, Inchon, respectivaly. Bentonites of 20 and 10 percent by weight are used as additive materials for fly ash and weathered granitic soil and the chemical solutions used in the test are acetic acid, methanol, heptane, and aniline which are frequently found in the leachate of waste fills. The concentrations of the chemical solutions are 100% and 75%. The results of the tests show that hydraulic conductivities of the oxter materials are increased by one or two orders of magnitude with permeating pure chemical solutions. The rate of hydraulic conductivity increase is lowest for Seochon fly ash admixed liner and highest for natural marine clay liner. The influence of hydraulic chemical solutions on the liner materials is least for acetic acid and largest for aniline. The increases of conductivity are not shown with the permeation of the solution of concentration 75%. At least by this test results, it can be recognized that the tested liner material can be quite stable with the solutions of significantly high concentration except pure solutions.

• Progress in Medical Physics
• /
• v.24 no.3
• /
• pp.171-175
• /
• 2013

Applicator of various kind of number ten kinds is used to raise from efficiency of brachytherapy to maximum. The compatibility of radiation source and applicator is very important subject for safety brachytherapy. Developed high dose rate brachytherapy source through Hanaro nuclear reactor in Korea Atomic Energy Research Institute and improve compatibility with using equipment in present. In this research, we wished to evaluate stability mechanical safety of radiation source and we developed phantom for evaluate several quality about Ir-192 sealed source that improve newly in Korea Atomic Energy Research Institute and is improved. The result for suitability of Ir-192 HDR source with brachytherapy tools that did normal operation in 2.2~2.7 cm extent about change of equal curvature and consider change of sudden curvature that did normal operation in radius 1.5~1.8 cm extent.

• Journal of Broadcast Engineering
• /
• v.15 no.1
• /
• pp.122-132
• /
• 2010

AT-DMB system has been developed to increase data rate up to double of conventional T-DMB in the same bandwidth while maintaining backward compatibility. The AT-DMB system adopted hierarchical modulation which adds BPSK or QPSK signal as enhancement layer to existing DQPSK signal. The enhancement layer signal should be small enough to maintain backward compatibility and to minimize the coverage loss of conventional T-DMB service coverage. But this causes the enhancement layer signal of AT-DMB susceptible to fading effect in transmission channel. A turbo code which has improved error correction capability than convolutional code, is applied to the enhancement layer signal of the AT-DMB system for compensating channel distortion. However there is a need for other solutions for better reception of AT-DMB signal in receiver side without increasing transmitting power. In this paper, we propose adaptive array antenna system with Eigen-space beamforming algorithm which benefits beamforming gain along with diversity gain. We analyzed the reception performances of AT-DMB system in indoor and mobile environments when this new smart antenna system and algorithm is introduced. The computer simulation results are presented along with analysis comments.

• The Journal of Society for e-Business Studies
• /
• v.27 no.2
• /
• pp.105-135
• /
• 2022

As COVID-19 has led to a surge in e-commerce Buy Now Pay Later(BNPL) has become preferred choice among millennials. In Korea Coupang followed by Naver Pay offers a deferred payment, aiming to create customer lock-in effect, save credit card processing fee and lay the groundwork for entering into new financial services. However the literature related to the influential factors of customers' usage intention toward a deferred payment is scarce. For the study, a multi-group analysis was carried out to find differences between Naver shopping and Coupang. The results revealed that the important factors that affect a deferred payment adoption were compatibility, impulsive buying tendency in Naver shopping, whereas compatibility, relative advantage, additional value in Coupang(listed in order of most important). In addition, impulsive buying tendency had a positive effect on adoption intention in Naver shopping and on perceived risk in Coupang. The results imply that Naver shopping need to focus on managing delinquency while Coupang should provide sufficient information on how late fees and credit rating downgrade work and try not to make a deferred payment option stand out. In order to increase adoption rate it is recommendable to narrow down target segment of a deferred payment and expand it to a specialized vertical such as travel.

• Korea journal of population studies
• /
• v.33 no.2
• /
• pp.113-136
• /
• 2010

Low fertility has become quite commonplace worldwide, and Europe has experienced below replacement fertility for several decades. In addition, lowest-low fertility, defined as period total fertility rate below 1.3, has rapidly spread in Europe during the 1990s and is likely to expand further. After the turn of century, lowest-low fertility started spreading in Eastern Asia. Korea's TFR of 1.19 in 2008 is lower than most European countries, although it is higher than the Hongkong(1.02) and Taiwan(1.09). The purpose of this paper is to examine the socioeconomic determinants of lowest-low fertility in Korea. In doing so, this paper discusses the effects of female labour force participation, labour instability on family formation and fertility. The data includes female labour force participation rate, unemployment rate, age at first marriage, and total fertility rate from 1980 to 2008. First, the economic recession hindered young people's economic independence and propensity to marry. Married couples were also depressed with uncertainty toward the future and avoided to have children. Second, the growth in female labor force participation had a negative impact on fertility, under the low level of compatibility between women's work and childrearing. Moreover, this paper argues that the rising cost of children including public and private educational costs is thought to be the main reason of the recent low fertility in Korea. Policy implications and some comments on population policies are also presented in the final section.

• Journal of Broadcast Engineering
• /
• v.16 no.2
• /
• pp.216-225
• /
• 2011

Following the proliferation of three-dimensional video contents and displays, many terrestrial broadcasting companies have been preparing for stereoscopic 3DTV service. In terrestrial stereoscopic broadcast, it is a difficult task to code and transmit two video sequences while sustaining as high quality as 2DTV broadcast due to the limited bandwidth defined by the existing digital TV standards such as ATSC. Thus, a terrestrial 3DTV broadcasting with a heterogeneous video codec system, where the left image and right images are based on MPEG-2 and H.264/AVC, respectively, is considered in order to achieve both high quality broadcasting service and compatibility for the existing 2DTV viewers. Without significant change in the current terrestrial broadcasting systems, we propose a joint rate control scheme for stereoscopic 3DTV service based on the heterogeneous dual codec systems. The proposed joint rate control scheme applies to the MPEG-2 encoder a quadratic rate-quantization model which is adopted in the H.264/AVC. Then the controller is designed for the sum of the left and right bitstreams to meet the bandwidth requirement of broadcasting standards while the sum of image distortions is minimized by adjusting quantization parameter obtained from the proposed optimization scheme. Besides, we consider a condition on maintaining quality difference between the left and right images around a desired level in the optimization in order to mitigate negative effects on human visual system. Experimental results demonstrate that the proposed bit rate control scheme outperforms the rate control method where each video coding standard uses its own bit rate control algorithm independently in terms of the increase in PSNR by 2.02%, the decrease in the average absolute quality difference by 77.6% and the reduction in the variance of the quality difference by 74.38%.

• Horticultural Science & Technology
• /
• v.19 no.3
• /
• pp.373-377
• /
• 2001

This study was conducted to find optimum pollination methods for overcoming pre-fertilization incompatibility in interspecific crosses between L. longiflorum 'Gelria' (LG) and L. cernuum (LC). In cross combination of $LC{\times}LG$, the survival rate of the ovaries was higher in the cut style pollinations than in normal stigmatic pollination. Among the various cut style pollination methods, pollination after cutting the styles 2 3mm length above the ovary and top of the ovary were the most effective ones. No ovaries and ovules survived in cross pollination of $LC{\times}LG$. In self-pollination of LG and cross pollination of $LC{\times}LG$, pollens germinated on the stigma by 12 hours and reached to the ovules by 90 hours after pollination. However, in the cross pollination of $LC{\times}LG$, pollen tubes elongated very slowly until 48 hours after pollination and a lot of deformed tubes were observed in the styler canal having swelled tube tip and irregular heavy callose deposition. The pollination time after anthesis also affected on the survival rate of ovaries and ovules showing the best result when pollinated on three days after anthesis. Stigma exudate promoted slightly the enlargement of ovaries, but the survival rate of ovaries and ovules was not increased.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.9
• /
• pp.425-434
• /
• 2007

Even though Internet backbone speeds have increased in the last few years due to projects like Internet 2 and NGI, many high performance distributed applications are able to achieve only a small fraction of the available bandwidth. The cause of such problem is due to a character of TCP/IP. The primary goal of this protocol is reliable data transmission. Therefore high speed data transmission didn't be considered when TCP/IP is designed. Hence several researchers have been studied in order to solve the problem of TCP/IP. One of these research results, parallel transfer technique, solves this problem to use parallel TCP connections on application level. Additionally, this technique is compatibility. Recently, these researchers have been studied a mechanism to decide the number of parallel TCP connections. However, some researchers reported the number of parallel TCP connection base on only empirical results. Although hardware performance of host affects transmission rate, the hardware performance didn't be considered in their works. Hence, we collect all data related to transmission rate, such as hardware state information (cpu utilization, interrupt, context switch). Then, we analyzed collected data. And, we suggest a new mechanism determining number of parallel TCP connections for maximization of performance based on our analysis.

• The Journal of Korean Academy of Prosthodontics
• /
• v.28 no.1
• /
• pp.165-191
• /
• 1990

Although a number of studies have been performed to assure that residual stress caused by a mismatch of alloy porcelain thermal expansion can contribute to clinical failure of a ceramometal restoration, the interactive influence of cooling rate on the magnitude of thermal expansion difference and on bond strength between them have not been extensively analyzed. The objective of this study was to determine the influence of cooling rate and the number of firing cycles on the expansion mismatch and the flexural failure resistance of metal porcelain strip. Tested alloys included one Pd-Ag alloy, one Ni-Cr-Be alloy with two kinds of porcelain, Vita and Ceramco. Metal specimens were cast into rods with a height of 13mm and a diameter of 5mm. Subsequently, the castings were subjected to scheduled firing cycles without porcelain. And the porcelain specimens after being fired were trimmed into a bar with a final dimension of $5{\times}5{\times}25mm$. Thermal expansions of the alloys and porcelains were measured by using a push rod or a differential dialometer respecitvely. Porcelain glass transition temperatures and expansion values were derived alloy-porcelain pairs were assessed by comparing expansion values of the components at a porcelain glass transition temperature. Calculations were made using combinations of a Ni-Cr alloy or Pd-Ag alloy with each of two porcelain products. Metal-porcelain strip specimens were subjected to four point loading in an Instron testing machine until crack occured at the metal-cramic interface at the time of sharp decrease of load on recorder. On the basis of this study, the following conclusions may be stated: 1. Regardless of the kinds of ceramometal combinations, both of calculated and experimental data revealed that the double fired specimens exhibited a significantly lower flexural strength. 2. By the rise of the amount of mismatch, bond strength were decreased. 3. Thermal expansion value of Pd-Ag alloys were higher than that of Ni-Cr alloys. 4. Expansion curves of metal were proportional to the increase of temperature and were not affected by the experimental conditions, however porcelains did not show the same magnitude of metal, and a shift of the glass transition temperature to higher temperatures was observed when cooled rapidly 5. Alloy-porcelain thermal compatibility appeared more dependent on the porcelain than the alloy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.93-99
• /
• 2017

The rate of traffic accidents that occurred in Korea last year is 10 out of every 100,000 people, ranking it 6th among the 35 OECD member countries. The accident rate of children with disabilities and elderly people is also high. The purpose of this study is to introduce traffic safety facilities which have been developed for the reduction of traffic accidents in non-urban areas in Korea through an analysis of the related literature, the accident factors using traffic accident analysis system data and traffic accident characteristics. Traffic safety integrated facilities for ICT-based pedestrian crossings are subject to cross-sectional coverage of child protection zones. The smart safety fence prevents vehicles from parking illegally and informs pedestrians that there is an access vehicle on the pedestrian crossing. The smart bump is designed to warn drivers who are not aware of the pedestrians. In order to standardize the appropriate form and size of the traffic safety facilities for pedestrian crossings, we constructed a standard model for each type, considering the road function, press classification, power, lane number, geometric form, etc. As a result, the rate of traffic accidents involving vulnerable people was reduced. In addition, it is anticipated that the maintenance costs will be reduced by the use of a solar power supply and their compatibility with the existing installed safety fences.