• 제목/요약/키워드: Rate of spread

검색결과 998건 처리시간 0.031초

System-Level Performance of Spread Spectrum-Based Add-on Service Overlaid onto the Existing Terrestrial Digital Multimedia Broadcast Band

  • Yoon, Seokhyun;Lim, Bo-Mi;Lee, Yong Tae
    • ETRI Journal
    • /
    • 제34권4호
    • /
    • pp.492-502
    • /
    • 2012
  • We consider an overlaid broadcast service, where a spread spectrum (SS)-based broadcast signal is overlaid onto the existing terrestrial Digital Multimedia Broadcasting (T-DMB) band. The system is similar to the augmented data transmission in the ATSC DTV, for which it was investigated mostly in terms of link level performance, such as bit error rate. Our focus in this paper is on the system-level performances. More specifically, utilizing both a large scale path loss and a small scale fading channel model, the primary objective is to explore the tradeoff between the coverage and the achievable rate of the overlaid service and, finally, to determine the achievable rate in the overlaid service for marginal coverage reduction in the existing broadcast service. The analytical and simulation results show that an SS-based add-on service of 10 kbps to 20 kbps can co-exist with the T-DMB service while resulting in only a marginal degradation in T-DMB coverage (for example, less than one percent reduction).

전단희석 액적의 건조 벽면 충돌 후 전개-수축 거동의 관찰 (Examination of Spread-Recoil Behavior of a Shear-thinning Liquid Drop on a Dry Wall)

  • 안상모;이상용
    • 한국분무공학회지
    • /
    • 제14권3호
    • /
    • pp.131-138
    • /
    • 2009
  • In the present study, spread-recoil behavior of a drop of shear-thinning liquid (xanthan solution) on a dry wall (polished stainless-steel plate) was examined and compared with that of Newtonian liquid (glycerin solution). Nine different kinds of xanthan and glycerin solutions were tested, including three pairs of xanthan and glycerin solutions, each having the same viscosity in low shear rate region ($10^{-2}-10^0\;l/s$). The drop behavior was visualized and recorded using a CCD camera. The maximum diameter and the spreading velocity of the xanthan drops turned out to be significantly larger and the time to reach their final shape was much shorter compared to the cases with the glycerin solutions, due to the smaller viscous dissipation resulted from lower viscosity in the higher shear rate region (>$10^0\;l/s$). As a result, the maximum diameters were measured to be larger than the predicted values based on the model proposed for Newtonian liquids, and the deviation was more pronounced with the solution with the larger viscosity variation. Consequently, viscosity variation with the shear rate was found to be a dominant factor governing the spread-recoil behavior of shear-thinning drops.

  • PDF

1991년부터 2007년까지 산불의 공간적 특성 (Spatial Patterns of Forest Fires between 1991 and 2007)

  • 이병두;이명보
    • 한국화재소방학회논문지
    • /
    • 제23권1호
    • /
    • pp.15-20
    • /
    • 2009
  • 산불을 효율적으로 관리하기 위해서는 지역별 산불 행동 특성에 대한 이해가 요구된다. 본 논문에서는 전국 시 군 구 단위고 산불통계 자료를 이용하여 발생 및 확산 특성을 분석하였다. 이를 위해 1991년 부터 2007년까지 17년간 발생건수, 연소면적, 확산속도, 건당 면적 자료를 이용하여 산불 특성에 따라 군집을 분류하고 GIS를 이용하여 공간적 분포 특성을 분석하였다 분석결과, 산불의 공간적 특성 변이가 뚜렷하게 관찰되었고, 전국 시 군 구는 산불위험성에 따라 5개의 군집으로 분류할 수 있었다. 대도시와 인근 지역은 산불위험이 낮은 군집으로 분류되었으나, 강원도 영동지방 4개 시 군은 가장 위험한 군집으로 분류되었다. 그 뒤를 이어 남, 서해안에 인접한 시 군 구의 산불위험성이 높았다.

산불 지표화에서의 바람에 의한 화염각 변화 산정식 도출에 관한 준-수치해석 연구 (Semi-numerical Study on the Flame Tilt Equation due to Wind on the Surface Fire in Forest Fire)

  • 김동현
    • 한국화재소방학회논문지
    • /
    • 제23권5호
    • /
    • pp.90-95
    • /
    • 2009
  • 산불의 확산에 있어 바람은 매우 중요한 인자이다. 바람은 또한 지형에 따라 변화되며 이로 인해 다른 확산형태를 가지게 된다. 따라서 산불의 확산속도 해석을 위해 먼저 풍속에 따른 화염각 변화를 살펴볼 수 있다. 이는 바람에 의해 변화된 화염각으로 인해 미연소 지표 대상물에 열전달의 차이를 가져오기 때문이다. 풍속이 증가할수록 화염과 지표면이 가까워짐으로 인해 열전달이 증가되어 미연소물질이 착화온도에 빨리 도달하게 되어 화염의 확산속도가 빨라지게 된다. 따라서 본 연구에서는 바람에 의한 화염각 변화 산정식을 Froude number 관계식을 이용한 수치해석과 실험을 통해 제시하였다. 그 결과, Froude number 계수 A=1.85를 제시하였고 제시된 식에 대한 실험 화염각의 평균 오차각은 약 $3.3^{\circ}$로 다른 모델식에 비해 실험값과 유사한 결과를 나타내었다. 향후, 이 연구를 통해 열전달 수치해석을 통한 화염확산연구에 활용될 수 있을 것으로 사료된다.

산불 확산에 영향을 미치는 임지내 산림연료와 경사도에 관한 연구 (Slope and Forest Fuel Effect on Spreading of Forest Fire)

  • 채희문;이찬용
    • 한국농림기상학회지
    • /
    • 제5권3호
    • /
    • pp.179-184
    • /
    • 2003
  • 산불 확산에 미치는 인자들 중 임지내의 삼림연료의 무게와 두께, 임지의 경사도의 관계에서 다음과 같은 결론을 얻었다. 임지내의 경사도와 산불의 확산과의 관계는 경사가 높아지면 질수록 산불의 확산 속도는 빠르게 나타나고 있으며, 경사 15%와 비교하여 30%, 45%, 50%의 경사는 30%일 때 약 1.5배 증가 추세를 보이고, 45%일 때는 6.8배 정도의 산불확산 속도가 증가, 경사 50%일 때는 13.7배 증가하는 것으로 나타났다. 산림연료의 두께와 산불의 확산과의 관계는 연료두께 2cm일 때 산불의 평균확산속도는 42m/min, 3 cm는 11m/min, 4cm는 6m/min, 5cm는 9m/min, 6cm는 6.6m/min로 나타났다. 산림연료의 두께와 산불의 확산과의 관계는 연료의 무게 0.1kg/$m^2$의 경우 산불의 평균 확산속도는 22.4m/min, 0.15kg/$m^2$의 경우 9.4m/min, 0.2kg/$m^2$의 경우 6.5m/min로 나타났다. 연료 무게의 경우는 경사도와 유사하게 무게의 크기에 따라 산불의 확산 속도가 좌우된다고 볼 수 있으며 이들 3가지 인자와 산불의 확산과의 관계를 상관분석을 실시한 결과 경사도가 가장 영향을 미치며, 다음으로 연료의 무게이며, 지피물의 두께는 뚜렷한 상관관계가 형성되지 않는 것으로 나타났다. 본 논문에서 연구된 산불 확산 속도는 산림미세연료 (임지에 있어서 지피물)에 중점을 두었기 때문에 식생분포와 산불의 확산속도와의 관계를 제외하였다. 보다 정밀한 확산속도를 예측하기 위하여 우리나라 실정에 알맞은 지형조건과 풍향조건의 인자들을 분석하여 산불의 확산속도를 예측하는 model을 구성할 필요가 있다.

입제비료 살포기의 출구조절에 의한 균일도의 분석과 제어 (Analysis and Control of Uniformity by the Feed Gate Adaptation of a Granular Spreader)

  • 권기영
    • Journal of Biosystems Engineering
    • /
    • 제34권2호
    • /
    • pp.95-105
    • /
    • 2009
  • A method was proposed which employed control of the drop location of fertilizer particles on a spinner disc to optimize the spread pattern uniformity. The system contained an optical sensor as a feedback mechanism, which measured discharge velocity and location, as well as particle diameters to predict a spread pattern of a single disc. Simulations showed that the feed gate adaptation algorithm produced high quality patterns for any given application rate in the dual disc spreader. The performance of the feed gate control method was assessed using data collected from a Sulky spinner disc spreader. The results showed that it was always possible to find a spread pattern with an acceptable CV lower than 15%, even though the spread pattern was obtained from a rudimentary flat disc with straight radial vanes. A mathematical optimization method was used to find the initial parameter settings for a specially designed experimental spreading arrangement, which included the feed gate control system, for a given flow rate and swath width. Several experiments were carried out to investigate the relationship between the gate opening and flow rate, disc speed and particle velocity, as well as disc speed and predicted landing location of fertilizer particles. All relationships found were highly linear ($r^2$ > 0.96), which showed that the time-of-flight sensor was well suited as a feedback sensor in the rate and uniformity controlled spreading system.

잔향음 우세 수조 환경에서의 수중음향 통신성능 분석 (Underwater acoustic communication performance in reverberant water tank)

  • 최강훈;황인성;이상국;최지웅
    • 한국음향학회지
    • /
    • 제41권2호
    • /
    • pp.184-191
    • /
    • 2022
  • 천해에서의 음파는 긴 지연시간을 가지는 다중경로를 통해 전달되며 이러한 특성은 통신에서 Inter-Symbol Interference(ISI)을 야기하기 때문에 성능을 악화시킨다. 본 논문에서는 잔향음 우세 환경에서의 통신성능을 분석하고 다중경로 지연시간과의 상관관계를 파악하기 위해 5 × 5 × 5 m3 수조에서 다양한 심볼 전송속도(100 sym/s to 8000 sym/s)를 갖는 Binary Phase-Shift Keying(BPSK) 신호를 이용하여 실험을 수행하였다. 제어가능한 수조 환경에서의 음향 채널은 수조 내 경계면 및 벽면에서의 다중반사로 인해 밀집한 다중경로 특성을 가지며 약 40 ms 이하의 최대 초과 지연과 8 ms 이하의 Root Mean Squared(RMS) 지연확산을 보였다. 본 논문에서는 4가지 통신 복조 기법을 이용하여 Bit Error Rate(BER) 성능과 출력 Signal-to-Noise Ratio(SNR) 성능을 분석하며 잔향음 우세 환경에서의 심볼 시간과 RMS 지연확산의 비율인 Symbol interval to Delay spread Ratio in reverberant environment(SDRrev)을 정의하여 통신성능이 보장될 수 있는 기준 심볼 전송속도를 제시한다.

Triangle spread carrier 기법을 이용한 수중음향통신에서 도플러 천이 주파수 추정 및 보상 (Doppler shift frequency estimation and compensation in underwater acoustic communication using triangle spread carrier technique)

  • 윤창현;라형인;이경원;김기만
    • 한국음향학회지
    • /
    • 제42권3호
    • /
    • pp.169-180
    • /
    • 2023
  • 수중음향통신의 성능은 다중경로 전달과 도플러 확산에 크게 영향을 받는다. 본 논문은 다중경로 전달 환경에서 강인한 기존의 Sweep Spread Carrier(SSC) 기법을 변형하여, 새로운 통신기법인 Triangle Spread Carrier(TSC) 기법을 제안한다. 제안한 TSC 기법은 상승-처프와 하강-처프 신호가 반복되는 반송파를 갖는 형태이며, 각각의 상관함수 특성을 활용하여 수신 신호의 도플러 천이 주파수를 추정하고 보정한다. 제안된 TSC 기법의 성능을 입증하기 위하여 수중 채널 시뮬레이터를 이용한 모의실험과 동해에서 수행된 해상실험을 결과를 제시한다. 해상실험 결과 추정된 도플러 천이 주파수만을 이용하여 복조하였을 때 비부호화 된 비트 오류율은 최대 0.194였지만, 제안한 방법을 적용하였을 때 비부화화된 비트 오류율이 0.001로 감소하였다.

Stock Returns and Market Making with Inventory

  • Park, Seyoung;Jang, Bong-Gyu
    • Management Science and Financial Engineering
    • /
    • 제18권2호
    • /
    • pp.1-4
    • /
    • 2012
  • We study optimal trading strategy of a market maker with stock inventory. Following Avellaneda and Stoikov (2008), we assume the stock price follows a normal distribution. However, we take a constant expected rate of the stock return and assume that the stock volatility is an inverse function of the stock price level. We show that the optimal bid-ask spread of the market maker is wider for a higher expected rate of stock returns.

복합영상관의 성능위주설계를 위한 가연물의 연소발열특성 연구: 객석의자의 열발생률 및 연소확산속도를 중심으로 (A Study on the Heat Release Characteristics of Fire Load for Performance Based Design of Multiplexes: A Focus on the Heat Release Rate and Fire Spread Rate of Cinema Seats)

  • 남동군;장효연;황철홍;임옥근
    • 한국화재소방학회논문지
    • /
    • 제34권1호
    • /
    • pp.11-17
    • /
    • 2020
  • 성능위주설계의 설계화원 정보는 피난안전성 평가에 직접적인 영향을 미치기 때문에, 실물화재 실험에 근거한 설계화원의 설정이 매우 중요하다. 복합영상관에 대한 성능위주설계의 신뢰성을 개선시키기 위하여, 상영관 의자에 대한 화재실험을 통해 열발생률과 화재확산속도 등의 화재거동에 관한 정보를 제공한다. 이를 위하여 실제 상영관과 유사하게 배열된 다수의 객석 의자가 적용되었다. 주요 결과로서, 객석의자 1개에 대하여 최대 열발생률과 단위 질량당 발열량은 각각 415~988 kW와 15.2~23.8 MJ/kg의 범위를 갖는다. 신형과 구형 객석의자의 평균 단위 질량당 발열량은 각각 23.6 MJ/kg과 16.7 MJ/kg으로 측정되었다. 즉, 신형의자의 증가된 플라스틱 및 쿠션재의 함량으로 인하여, 신형이 구형에 비해 화재위험성이 높은 것으로 확인되었다. 추가로 객석의자가 일렬로 배치될 때, 점화위치와 상관없이 0.39~0.42 m/min의 화재확산속도가 관찰되었다. 마지막으로 복합영상관의 성능위주설계를 위하여 객석의자의 최대 열발생률과 화재성장률로 구성된 화재성장곡선이 제안되었다.