• 한국해양공학회지
• /
• 제6권1호
• /
• pp.105-112
• /
• 1992

The main purpose of this study is to derive a law of fatigue crack growth rate in the region of elastic or elasto-plastic fracture mechanics at elevated temperatures through the application of dimensional analysis. An equation of elasto-plastic fatigue crack growth rate at elevated temperatures appeared a new Arrhenius type equation containing J-integral range and absolute temperature. The elastic or elasto-plastic crack growth rate equation shows a fairly good agreement with the experimental results for Cr-Mo-V rotor steel and Hastelloy-X alloy in the comparatively wide temperature ranges.

• 대한치과의사협회지
• /
• 제12권2호
• /
• pp.113-118
• /
• 1974

The importance of light and stress as factors in growth has not previously been clearly delineated. As the result of using experimental environments on growth rate of incisors in 24 young rats with body weight ranging 58 Gm to 62 Gm., the author obtained following conclusions. 1) The eruption rate of normal rats incisors was 0.421mm in upper incisors and 0.592mm in lower incisors per a day respectively. 2) In light environment, growth rate of incisors in rats and body weights were found to increase more rapidly during the 8-week experimental period in comparison with any environments. 3) In stress environment, growth rate of incisors in rats and body weight were found to decrease in comparison with amy environments during the 8-week experimental period.

• Journal of Welding and Joining
• /
• 제5권1호
• /
• pp.73-80
• /
• 1987

During PWHT, it is well known that residual stress in weld HAZ is one of the reasons for PWHT embitterment. In case of static loading, it was experimentally found that fracture toughness of weld HAZ was dependant upon PWHT conditions. However, the effects of PWHT on fatigue behavior are not clearly verified. Therefore, in this paper, the effects of heating rate PWHT conditions and residual stress simulated in weld HAZ of Cr-Mo steel on fatigue crack propagation behavior were evaluated by fatigue Testing and SEM observation. The obtained results are summarized as follows; 1. Applied stress($10 Kgf/mm^2$) in weld HAZ during PWHT tneded to decrease fatigue strength and to increase fatigue crack growth rate. 2. Applied stress and slow heating rate of 60.deg. C/hr during PWHT contributed to precipitin of impurity elements as well as carbide, which promoted the fatigue crack growth. 3. Fatigue crack growth rate decreased at the heating rate of 220.deg. C/hr in contrast with 600.deg. C/hr and 60.deg. C/hr.

• 방사선산업학회지
• /
• 제5권3호
• /
• pp.211-220
• /
• 2011

This study was carried out to develop salt tolerant varities of rapeseed (Brassica napus L.) which can be grown in the high salty reclaimed land. The seeds of three varieties 'Naehan', 'Tammi', and 'Halla' were treated by proton ion beams and gamma rays with 0 to 2,000 Gy. For the selection of salt tolerant lines, emergence and survival rate, and growth characteristics of $M_2$ to $M_4$ generations were investigated in the Saemangeum reclaimed fields with the different salt concentrations. The lines with potential salt tolerance were selected in the $M_4$ generation and tested indoor for their growth characteristics. There was no significant changes in the soil pH for $M_4$ generation during growth period. However, soil EC was higher in early spring than sowing period (mid October). In $M_4$ generation test, the seeds of original and selected line showed high rates of emergence and survival, as determined one month after sowing. After wintering, however, the original varieties showed the significant reduction in the survival rate, while the selected lines showed a higher survival rate and good growth, leading to the completion of their life cycle. Consequently we selected 9 lines from $M_4$ generation with better performance in growth and yield. Soil EC was $2.8{\sim}4.3dS{\cdot}m^{-1}$ during $M_4$ generation growth period. The laboratory test of the lines selected from $M_4$ generation was made for their salt tolerance potential. The selected lines showed higher chlorophyll and proline contents than the original varieties. There was also no significant difference in the emergence rate of seed between the original and selected varieties. In 200 mM natural sea salt, the $N{\gamma}600-21-1-641$ line derived from 'Naehan' was the highest in growth rate, leaf chlorophyll and proline contents. $T{\gamma}800-20-2-461$ line derived from 'Tammi' didn't show significant difference in growth rate compared to original variety in 200 mM and withered in 250 mM like other lines as time passed. $H{\gamma}200-7-1-740$ line showed similar growth and chlorophyll content compared to its original variety.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.133-135
• /
• 2012

The Fire growth rate(kW/s²) is significant impact on initial fire behavior in fire safety design of buildings. As a result of domestic existing combustibles, this study analyzed considering matters in techniques for calculating caloric values, and then made an investigation sheet. By utilizing written combustion sheets, the study could suggest a standard model at common houses and dense ones after getting caloric value information in dense ones. As a result, fire growth rate is experiment 1(0.01), experiment 2(0.0048), FDS(0.0072), MATSUYAMA equation(0.0144).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.73-78
• /
• 2003

The InP thin films grown by metalorganic chemical vapor deposition (MOCVD) are widely used to optoelectronic devices such as laser diodes, wave-guides and optical modulators. Effects of various parameters controlling film growth rate such as gas-phase reaction rate constant, surface reaction rate constant and mass diffusivity are numerically investigated. Results show that at the upstream region where film growth rate increases with the flow direction, diffusion including thermal diffusion plays an important role. At the downstream region where the growth rate decreases with flow direction, film deposition mechanism is revealed as a mass-transport limited. Mass transport characteristics are also studied using systematic analyses.

• 한국양식학회지
• /
• 제10권3호
• /
• pp.311-320
• /
• 1997

조피볼락 사육시 수온과 먹이공급량이 성장과 사료효율에 미치는 영향을 알기위하여 사육수온과 먹이공급량을 달리하여 사육실험을 한 결과는 다음과 같다. 사육수온 12, 15 및 $18^{\circ}C$에서 사육한 결과 $15^{\circ}C$ 실험구에서 일간사료섭취율 및 일간성장률은 3.64 및 1.66%로 다른 실험구에 비하여 높게나타났으나, 사료효율은 40.7-45.7%로 실험구간에 차이가 없었다. 먹이공급량을 어체중의 0.0-3.0% 범위로 하여 사육실험한 결과 사료효율은 절식구를 제외한 나머지 실험구에서는 41.1-57.2%의 범위로 유의차가 없었고, 일간성장률은 1.5-3.0%공급구에서는 0.79-0.86%의 범위로 차이가 없었다. 어체분석결과 육질부비율은 전실험구에서, 간중량지수, 장중량지수 및 비만도는 1.0-3.0% 공급구에서 차이가 없었다. 혈액성상 분석결과 TP 및 TG는 전실험구에서, GOT, GPT, TG, GL 및 Ht는 1.0-3.0% 공급구에서 차이가 없었다. 이상의 결과로부터 조피볼락 1년생은 육상수조양식시 사육수온은 15-18$^{\circ}C$에서, 먹이공급량은 포식량의 약 70-80%가 적당한 것으로 사료된다.

• 수완나부미
• /
• 제15권2호
• /
• pp.215-244
• /
• 2023

This study analyzes the effect of macroeconomic indicators such as foreign direct investment (FDI), domestic investment, trade, inflation, unemployment, population, and governance indicators on economic growth and points out the GDP growth rate in 2002- 2019 among ASEAN countries. Data were compiled from the Worldwide Governance Indicators (WGI) and the World Bank, and the effect of variables on GDP was predicted using the pooled ordinary least squares (POLS), fixed effects model (FEM), and random effects model (REM) methods. As a measure of growth, the GDP growth rate has been taken; FDI and domestic investment, trade, inflation, and governance indicators are positively connected and have an influence on economic growth in these ASEAN countries; domestic investment, population, and unemployment have a negative relationship to economic growth. The macroeconomic indicators and institutional stability of the nation have an effect on its economic growth. Comprehensive institutional stability and well-laid macroeconomic policies are required for growth to materialize.

• Asian-Australasian Journal of Animal Sciences
• /
• 제9권1호
• /
• pp.57-61
• /
• 1996

Four castrated Corriedale sheep were used in an experiment to observe the changes in insulin, growth hormone and cortisol in blood plasma following a prolonged infusion of a high rate of somatostatin (SRIF). The animals wee infused with either saline, 25 or $50{\mu}g/kg/h$ of SRIF for 3 hours. Blood samples wee taken every 20 minutes until 1 hour following the end of the SRIF infusion. Both SRIF infusion levels suppressed the release of insulin into plasma to approximately 3.5 mU/l. The SRIF infusions reduced the concentration of growth hormone to barely detectable levels. Following the withdrawal of SRIF there was a massive release of growth hormone. The plasma concentration of growth hormone reached 60 ng/ml within 20 minutes, the length of the growth hormone discharge was in excess of 1 hour. The extent of the discharge of growth hormone following the SRIF infusions was greater than that suppressed by the infusion. The SRIF apparently caused an increase in the plasma concentration of cortisol at the end of the infusion and following is withdrawal. This is possibly associated with some change in the metabolic rate associated with the suppression of insulin or glucagons release. The present experiment demonstrates that a high rate of SRIF infusion can not completely inhibit the release of insulin into the plasma.

• 생물환경조절학회지
• /
• 제25권2호
• /
• pp.106-110
• /
• 2016

식물의 생육과 생산성을 예측하는 것은 매우 중요한 일이다. 본 연구는 common ice plant (Mesembryanthemum crystallinum L.)의 작물생장률, 상대생장률, 지상부 생체중과 건물중, 수확시기, 상품률과 상품수량과 같은 생육과 수확 요인들을 쉽게 읽을 수 있는 재식밀도-생육-수확(PGH) 도표를 만들기 위함이다. 광도 $140{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$과 일장 12시간 주기로, 3파장 형광등을 이용한 완전제어형 식물공장 시스템에서 박막수경 재배하였다. 4가지 재식밀도($15{\times}10cm$, $15{\times}15cm$, $15{\times}20cm$, and $15{\times}25cm$) 하에서 생육과 수량을 분석하였다. 재식밀도가 증가할수록 어느 한계까지는 식물체당 생체중과 건물중은 증가하는 경향이었으며, 단위면적당 생체중인 수량 또한 같은 경향을 보였다. 작물생장률, 상대생장률과 lost time은 2차 등식 형태를 보였으며, 지상부 생체중과 건물중은 직선적인 관계를 보였다. 이러한 등식을 이용하여 재식밀도-생육-수확(PGH) 도표를 만들었다. 예를 들면, $15{\times}20cm$ 재식밀도와 식물체당 생체 중 100g에서 수확할 경우, 재식주수, 작물생장률, 상대생장률, lost time, 식물체당 건물중, 수확시기와 수량은 각각 $33plants/m^2$, $20g{\cdot}m^{-2}{\cdot}d^{-1}$, $0.27g{\cdot}g^{-1}{\cdot}d^{-1}$, 22days, 2.5g/plant, 정식 후 26일과 $3.2kg{\cdot}m^{-2}$이었다. 이 도표를 가지고 적어도 2가지 요인 예를 들면, 재식밀도와 수확요인 중 하나만 알면, 작물생장률, 상대생장률, lost time과 같은 생육 요인과 지상부 생체중, 지상부 건물중, 수확시기와 수량과 같은 수확 요인들을 쉽게 구할 수 있다. 이러한 도표는 다양한 작물의 생육과 수량 요인을 예측할 수 있어 완전제어형 식물 생산 시스템 설계를 위해 유용한 도구가 될 것이다.