• 제목/요약/키워드: Rate of certification

검색결과 218건 처리시간 0.024초

고온에 노출된 국내산 낙엽송 구조용 집성재 기둥의 탄화 특성 (Charring Properties of Glued Laminated Timber Columns using Domestic Larch Exposed to High Temperatures)

  • 안재홍;최윤정;김세종
    • 한국건축시공학회지
    • /
    • 제23권1호
    • /
    • pp.23-33
    • /
    • 2023
  • 목구조 건축물의 목재 구조부재는 내화 설계시 국제적으로 탄화 속도나 탄화 두께를 사용하며, 국내에서도 내화구조 인정시 탄화 두께 기준을 적용한다. 본 연구에서는 국내산 낙엽송으로 제작된 구조용 집성재 기둥의 탄화 특성에 대하여 내화시험을 실시하여 탄화 특성, 하중비에 따른 영향 및 유로코드(Euro code)에서 제시한 탄화 속도와 비교 분석하였다. 내화시험 결과 탄화 두께는 단면 코너 부위의 영향을 보이는 것으로 나타났으며 하중비 0.9 이하에서는 하중비가 탄화 두께에 미치는 영향은 미미한 것으로 나타났다.

A comparative analysis of rumen pH, milk production characteristics, and blood metabolites of Holstein cattle fed different forage levels for the establishment of objective indicators of the animal welfare certification standard

  • Baek, Dong Jin;Kwon, Hyoun Chul;Mun, Ah Lyum;Lim, Joo Ri;Park, Sung Won;Han, Jin Soo
    • Animal Bioscience
    • /
    • 제35권1호
    • /
    • pp.147-152
    • /
    • 2022
  • Objective: This study was conducted to obtain an objective index that can be quantified and used for establishing an animal welfare certification standard in Korea. For this purpose rumen pH, ruminating time, milk yield, milk quality, and blood components of cows reared in farms feeding high forage level (90%) and farms feeding low forage level (40%) were compared. Methods: Data on rumen pH, rumination time, milk yield, milk fat ratio, milk protein ratio, and blood metabolism were collected from 12 heads from a welfare farm (forage rate 88.5%) and 13 heads from a conventional farm (forage rate 34.5%) for three days in October 2019. Results: The rumination time was longer in cattle on the welfare farm than on the conventional farm (p<0.01), but ruminal pH fluctuation was greater in the cattle on conventional farm than the welfare farm (p<0.01). Conventional farms with a high ratio of concentrated feed were higher in average daily milk yield than welfare farms, but milk fat and milk production efficiency (milk fat and milk protein corrected milk/total digestible nutrients) was higher in cattle on welfare farms. Blood test results showed a normal range for both farm types, but concentrations of total cholesterol and non-esterified fatty acid were significantly higher in cows from conventional farms with a high milk yield (p<0.01). Conclusion: The results of this study confirmed that cows on the animal welfare farm with a high percentage of grass feed had higher milk production efficiency with healthier rumen pH and blood metabolism parameters compared to those on the conventional farm.

혁신형 제약기업 인증·지원 정책만족도에 대한 영향요인 연구 : 정책형성과정 변인을 중심으로 (A Study on the Factors Influencing the Satisfaction of Certification and Support Policy of Innovative Pharmaceutical Companies : Focusing on the policy formation process variables)

  • 김대진;오기환;하동문
    • 한국산학기술학회논문지
    • /
    • 제19권8호
    • /
    • pp.360-369
    • /
    • 2018
  • 국내 제약 산업에는 2012년부터 혁신형 제약기업 인증 지원 정책이 시행되고 있다. 이 연구는 이 정책의 형성과정 및 정책만족도에 대한 이해관계자와 관련 전문가의 인식을 파악하고, 정책만족도를 설명하는 요인을 파악하기 위해 수행하였다. 혁신형 제약기업을 포함하여 제약기업, 대학, 정부출연연구소 관계자를 대상으로 이메일, 팩스 등을 통해 설문조사하였으며, 유효 응답률은 38.4% (61/159) 였다. 연구결과 정책형성과정 중 정책필요성(정책문제설정 단계)에 대한 인식이 가장 긍정적이었으며, 다른 모든 단계와 정책만족도에 대한 인식은 보통 수준이었다. 응답자 개인 변인 및 정책형성과정에 대한 인식 변인 중 정책만족도와 관련이 있는 변인을 대상으로 다중회귀분석을 통해 영향 요인을 살펴본 결과, 정책결과 및 정책집행 단계의 일부 변인이 주요 요인으로 분석되었다. 구체적으로 정책만족도에 가장 큰 영향을 미치는 요인은 인증기업의 성과(정책결과 단계)에 대한 인식인 것을 확인하였다. 또한 적정성 및 사후관리 능력(정책집행 단계)에 대한 인식 역시 정책만족도에 미치는 영향력의 크기가 유사했다. 이는 수요자의 정책만족도에는 정책결과뿐만 아니라 정책집행과정에 대한 인식이 중요하다는 것을 시사한다. 다만 정책 시행 초기에 수행되는 등의 한계로 인해 향후 추가 연구를 통해 검증 및 보완이 필요하다.

수력선별 공정이 석탄 가스화 용융 슬래그 잔골재 품질에 미치는 영향 (Hydroelectric Sorting Process is coal Gasification Slag Effect on the Quality of fine Aggregates)

  • 후윈야오;김수호;한준희;김종;한민철;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2021년도 가을 학술논문 발표대회
    • /
    • pp.120-121
    • /
    • 2021
  • This study examines the performance of the pre-treatment process system to use CGS, a by-product generated in IGCC, as a concrete fine aggregate for construction materials, on the quality of CGS fine aggregate. As a result of the analysis, it is judged that the quality of fine aggregates of CGS can be improved at both density, absorption rate, and 0.08mm body passage amount after the hydroelectric screening process using water as a medium during the pretreatment process. It is believed that it can be used as basic data for national standard certification of CGS fine aggregates in the future.

  • PDF

최근 5년간 국적항공사 조종사의 항공신체검사 부적합 판정결과 (Survey of Medically Disqualified Airline Pilots in Korea: 2015~2019)

  • 권영환
    • 항공우주의학회지
    • /
    • 제30권2호
    • /
    • pp.70-74
    • /
    • 2020
  • This study aimed to quantify the causes of Korean airline pilots' medical disqualification during 2015~2019. The airline pilot disqualification data is important for grasping what health problems are common to pilots and establishing preventive health care programs. We were able to obtain data from official sources at the Korean Civil Aviation Authority during 2015~2019. The total number of pilots was 29,095, and the number of disqualified professional pilots in Korea was 36. Looking at airline pilots' status by age group, the 40s were the highest with 38%. However, the disqualification rate per 1,000 pilots was the highest in the 60s, at 4.6. When the different diagnostic categories classified the disqualification results, cardiovascular disease was the highest with 12 cases (33.3%), followed by eye disease, malignancy, neurology, psychiatry, otorhinolaryngology, and respiratory disease. The total number of pilots during 2015~2019 was 29,095, and the overall disqualification rate of 1.6/1,000 pilots.

자동차 적용기기용 위성정보시스템 모듈의 신뢰성 평가기준 (Reliability Assessment Criteria of Satellite Information System Applied for Vehicles)

  • 송병석;황순미;천성일;정해성;백재욱
    • 한국신뢰성학회지:신뢰성응용연구
    • /
    • 제9권2호
    • /
    • pp.93-106
    • /
    • 2009
  • GPS(Global positioning system) system is widely used in artificial satellite, ground controlled approach system as well as in end-user environment such as in the automobile. It is exposed to a very diverse environment and consists of many complicated components and therefore needs careful approach to the enhancement of reliability of the item. In this article reliability standards for the GPS system are established in terms of quality certification tests and failure rate tests.

  • PDF

다중 필터 시스템의 유동특성 해석 (Analysis of Flow Characteristics of Multiple Filter System)

  • 손인수;서미영;김준호;유진석
    • 한국산업융합학회 논문집
    • /
    • 제26권4_2호
    • /
    • pp.615-621
    • /
    • 2023
  • In this study, flow analysis of single, double, and triple filter systems of cylindrical structures was performed to analyze the flow characteristics of each filter. As a result of the flow analysis of the filter system, the number of filters and the pressure drop rate tend to be proportional to each other. It was found that the area passing through the inside of the filter had almost the same pressure. The maximum pressure drop rate of the triple filter system was about 14.9% for the forward-flow and about 12.4% for the reverse-flow. It was determined that the performance of the filter was stable within 20% of the allowable pressure drop rate of the filter system, which is the standard presented to the Korea Water Technology Certification Institute(KWTCI). In the future, a study on the decompression characteristics of the filter system according to the effect of the arrangement interval and filter density of the triple filter will be conducted.

LEED-Healthcare 세부항목의 평균득점률을 통한 병원의 친환경성 분석 (Analysis of Sustainability of Hospital Based on Average Achieved Rate in LEED-HC Credits)

  • 강지은
    • 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
    • /
    • 제26권1호
    • /
    • pp.29-37
    • /
    • 2020
  • Purpose: The purpose of the research is to find difficulty levels of LEED credits in each LEED level based on credits achievement in order to find important of LEED-HC credits to gain LEED-HC. Methods: The individual credits of LEED-HC v.2009 scorecards from USGBC website are analyzed. With achieved scores rate of LEED credits per each Level, all credits are reassembled in 4 different ranges (A~D); easy (A), easy-moderate (B), moderate-hard (C) and hard (D) to achieve scores. Results: 1) Achieved point rate in LEED-HC specific credits are low. These credits need to be reviewed carefully. 2) In 88 projects, 37 projects are gained Silver level which is more than projects in certification level. In order to encourage to gain LEED-HC level, Average Achieved rate to earn Certificate level needs to be risen. 3) Credits in range D rarely affect to gain platinum level. EAc1 (24 points) are critical to gain Silver and Gold level. However, EAc1 points are not effective to achieve Certificate level. Implications: This research will provide a fundamental back data to set up Korean Green building rating system for Healthcare.

Effect of 1-methylcyclopropene on Postharvest Quality in 'Formosa' Plums (Prunus salicina L.) Harvested at Various Stages of Maturity

  • Lee, Ji-Hyun;Bae, Rona;Lee, Seung-Koo
    • 원예과학기술지
    • /
    • 제29권6호
    • /
    • pp.583-591
    • /
    • 2011
  • 'Formosa' plums were picked at three maturity stages according to skin redness, treated with $1{\mu}L{\cdot}L^{-1}$ 1-MCP at $10^{\circ}C$ for 24 h and then stored for 21 days at $10^{\circ}C$. Ethylene production, respiration rate, firmness, color, TSS, TA, and ethanol concentration were determined. Total phenolic content, total flavonoid content, and antioxidant capacity were determined periodically by separating the flesh from the peel. Ethylene production and respiration rate were strongly inhibited in all stages of the 1-MCP-treated fruit, while ethylene production dramatically increased in all stages of non-treated fruit until 11 days after harvest, after which it decreased until the end of the experiment. The respiration rate of the stored fruit increased for 11 days in stages 1 and 2 and for 7 days in stage 3 and decreased after. 1-MCP-treated fruit in all stages showed delay in fruit quality changes such as firmness, TA, skin color, and ethanol concentration, but non-treated fruit did not. Total phenolic contents, total flavonoid contents and antioxidant capacity of 'Formosa' plums were not affected by 1-MCP treatment or maturity stage. However, those values were higher in the peel than in the flesh.

인삼 GAP 인증기준의 현장실천평가결과 분석에 따른 인증기준 개선방안 (Improvement of Certification Criteria based on Analysis of On-site Investigation of Good Agricultural Practices(GAP) for Ginseng)

  • 윤덕훈;남기웅;오소영;김가빈
    • 한국식품위생안전성학회지
    • /
    • 제34권1호
    • /
    • pp.40-51
    • /
    • 2019
  • 인삼은 인삼산업법이라는 독립된 법률의 적용을 받으며 4~6년간의 장기 재배기간과 이동경작이라는 독특한 재배특성이 있고 타 작물도 생산하는 복합영농의 형태를 가지고 있는 농가가 많은 점 등 일반 작물과는 생산과정과 관리방법이 다르다. 따라서 GAP기준에 적합한 인삼 생산을 위해서는 GAP인증기준 항목별로 인삼농가의 실천수준을 파악하여 미흡한 점에 대해서 실천방안을 제시할 필요가 있다. 인삼에 대하여 GAP인증을 신청한 농가의 인증 취득률은 77.6%으로 기타 농산물의 94.1% 보다 낮았다. 미등록농약의 사용이나 토양 중금속 기준치 초과 등 서류심사 단계에서 13.7%가 부적합으로 판정되었으며, 현장심사결과 관리미흡으로 인증을 취득하지 못한 경우는 8.7% 이었다. 이는 기타 농산물에서 서류심사 부적합율 5.3%와 현장심사 부적합율 0.6%에 비하여 상당히 높은 것으로 인삼에 있어서 부적합율이 높은 원인을 분석하여 부적합율을 낮추는 방안 모색이 필요하다. 전체 72개 평가항목 중 10가지 주요 필수항목인 필수+ 기준에 대해 인삼은 2.65점으로 평가되어 기타 농산물의 2.81점 보다 다소 낮게 평가되었다. 특히 인삼농가에서는 토양 및 작물 병해충관리용 농약의 안전사용기준 준수가 각각 2.01점과 1.92점으로 평가받아 기타 농산물의 2.96점과 2.94점에 비하여 상대적으로 낮아 인삼농가의 농약사용에 좀 더 많은 주의가 필요하다. 일반 필수기준인 필수기준에서도 인삼은 2.33점으로 기타 농산물의 2.58점 보다 낮게 평가되었다. 인삼이 기타 농산물에 비하여 상대적으로 낮게 평가된 항목은 영농기록의 1년 이상 보관 항목(1.98점), 품질보증 종자 사용 항목(1.31점), 토양 및 작물 병해충 관리용 농약 사용 기록 항목(1.38점과 177점), 농약보관장소 표시물(1.69점), 수확후저장장소 관리 항목(1.67점), 작업 전 후 손 세척 항목(1.00점), 작업자 위생복장 착용(1.50점) 작업자 안전위생교육 항목(0.82점), 위해요소관리계획서(1.96점) 등으로 이 항목들은 인삼농가들이 앞으로 개선을 해야 할 필요가 있다. 또한 전체 72개 항목 중 인삼에 적용되지 않는 항목이 12개 항목(필수 10개, 권장 2개)에 달한다. 따라서 기존의 인증기준으로는 인삼 생산과정에 대해 실효성 있는 평가를 하기에는 부적절한 것으로 판단된다. 결론적으로 인삼에 대한 GAP인증의 확대를 위해서는 차별화된 인증기준이 필요하며, 인삼 농가에 대한 GAP관리교육이 보다 체계적이고 현장중심으로 수행될 수 있는 프로그램의 개발이 필요하다.