• Particle and aerosol research
• /
• v.7 no.3
• /
• pp.87-97
• /
• 2011

In this study, we organized the test results obtained from the performance tests for the CA certificated air cleaners which had been commercially available in Korea since 2003, and analyzed the correlation among the test parameters such as flow rate, particle collection efficiency, clean air delivery rate (CADR), ozone emission, odor removal efficiency and noise level etc. The noise level of 267 air cleaners were increased as concentrated at the 45, 50, 55 dB, which are the required noise level for CA certification according to flow rate, and ozone emissions from the CA air cleaners were significantly lower than the requirement limit, 50 ppb for 24 hour operation. The average particle collection efficiency and odor removal efficiency were 89.3 and 80.8%, approximately 20% higher than the requirement of CA certification, regardless of flow rates. The particle removal performance of an air cleaner was clearly discriminated by its CADR, and the CADR was obtained with a simple calculation: 0.79 x flow rate. The low differentiation of gas removal performance of air cleaners by the current CA gas test method was improved by 3.2, 751.3, 13.4 times for ammonia, acetic acid, respectively, by adopting the CADR concept and the real time measurement method, FTIR, for gas removal performance test.

• Journal of the Korea Safety Management & Science
• /
• v.24 no.3
• /
• pp.15-21
• /
• 2022

This study examined the certification effects of safety and health management system (SHMS) on the establishment level of SHMS and accident statistics in construction industry. This study obtained the establishment level of SHMS for 106 construction companies surveyed from our previous study. In addition, three major accident statistics (mortality rate, accidental mortality rate, and injury rate) for the companies were collected from the database in Korean Occupational Safety and Health Agency. The statistical analysis results revealed that the establishment level for SHMS certified companies was significantly higher than those for uncertified or certification preparing companies. Furthermore, SHMS certified companies showed significantly smaller accident statistics compared to uncertified or certification preparing companies. The results of this study support the positive effects of SHMS on reducing major industrial accidents in construction companies.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.5
• /
• pp.39-45
• /
• 2002

Since 100PPM Qualify Certification System has been established by the Industrial Advancement Administration in 1995, 1000PPM Quality Innovation Movement has contributed much to the enhancement of quality competitiveness of Korea's parts industry. And in 2000, raised to a higher level, Single PPM Quality Certification System has been established by the Small and Medium Business Administration. Single PPM Qualify Innovation Movement seeks to reduce the number of defects to below 10 out of one million industrial items produced. Ultimately, Single PPM Quality Innovation Movement aims at achieving perfection, by enabling a zero defect rate in industrial production through the participation of all members of an organization. So this study aims to show the tangible and intangible effects of Single PPM Quality Certification System. and to suggest a methodology to improve current problems of Single PPM Quality Innovation Movement.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.12
• /
• pp.688-694
• /
• 2009

With the increase in the demand for sustainable and environmentally-friendly development, Green Building Certification System came into force in 2002, Evaluation parts of Green Building Certification System are divided into land use and transportation, energy, ecological environment, and indoor environment. Alloted point for the part of energy is larger than other part, thus we can say that this part is very important to increase the green building performance. This study aims to analyze the present condition of design and construction for the part of energy in the certificated green school building. Total 40 certificated school buildings were selected and average scoring rate of each item was evaluated. Key particular to be considered were suggested to improve the item of energy consumption.

• Food Science and Industry
• /
• v.55 no.3
• /
• pp.301-307
• /
• 2022

As a result of analyzing the domestic and foreign HACCP systems, advanced countries mandated HACCP system on all foods to strengthen food safety management and USA, EU and China do not apply small-scale HACCP system. Looking at the cases of food safety accidents in Korea and the non-compliance rate of HACCP certification evaluation by size, the accident rate of companies without HACCP certification was 31.2% higher than that of companies with HACCP certification. The nonconformity rate of food inspection standards was analyzed to be 89.0% higher than that of HACCP certification companies. Based on the international trend of food safety management and the frequency of food safety accidents, it is proposed to gradually expand the mandatory application of HACCP system in Korea to all foods, and to change the small-scale HACCP standard from less than 500 million Korean won or 21 employees to less than 500 million Korean won.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.1
• /
• pp.111-118
• /
• 2016

KC Mark is one of the country's integrated legal force to the minimum mandatory certification mark system for safety. That is absolutely needed for manufacturing and sales of goods in Korea. This thesis intended to see what is prevalent for both imports and domestic products for illegal and defect and rebuild the ecosystem as soon as possible for the healthy development through public awareness. In this theses point out the seriousness of the problem based on the various kinds of press releases, data of KCA(Korea Consumer Agency), MOTIE(Ministry of Trade, Industry and Energy) and KCA(Korea Customs Service) to the problem of certification system of KC mark and propose a solution to that issue. This study is considered to make befit the nation's place in the world and sustainable development is possible about the system of certification KC. This study expect more research on this issue in order to make enhance the confidence of KC mark.

• Journal of the Korea Convergence Society
• /
• v.12 no.12
• /
• pp.267-272
• /
• 2021

This study would like to propose a certification of aviation components manufactured through 3D printing. Currently, many types of 3D printers are being used in various industries. Among them, a lot of research is being done in the aviation sector to manufacture drones and aviation components. However, the current level of 3D printer technology and the application of aviation components using it are lacking in many problems and related airworthiness certification standards. Furthermore, clear certification criteria for conformity and coherence are rarely presented. Therefore, we would like to propose matters related to certification of 3D printed equipment for application as aviation components. It is expected that 3D printing equipment will improve precision, reduce defect rate, sagging problem, and bed leveling problem will be solved in the future, and certification standards will be clearly established. In addition, we hope that the reliability of aviation components applied with 3D printing technology will be improved and the relevant certification standards will be further developed.

• Korean Architects
• /
• s.636
• /
• pp.19-19
• /
• 2022

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.728-729
• /
• 2015

As environmental issues have been increased globally, eco-friendliness in the construction area, which accounts for more than 30% of total GHG gas emission has being urged. In response, the Korean government has implemented G-SEED(Green Standard for Energy and Environmental Design) certification from 2002. However, total number of certified apartment buildings is only around 1% of total number of approved apartment buildings. As a basic research to find out reasons of low rate of the certification, this paper analyzes consumers' decision-making process in G-SEED certified apartment building market comparing to non G-SEED certified one and draw System Dynamics modeling based on causal relationship. As a result, consumers' demand for the certified one is increased by 'Perceived Relative Utility' which is resulted from comparison process with non-certified one. The 'Perceived Relative Utility' is ascended upward steadily by 'Relative Perceived Price' considered as relatively short-term effect and 'Favorable Image of Certified Housing' referred to long-term effect.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.4
• /
• pp.308-315
• /
• 2007

This study is performed to find out the climb performance of light airplane, Chang Gong-91, as a part of flight test to acquire the certification. Chang Gong-91 is a 5-passenger light aircraft of normal category with single reciprocating engine, and the first officially certified by Korean Ministry of Construction and Transportation in 1993. These flight test procedure and data for climb performance are used to get type certification. We have got maximum climb rate for operating altitude, best angle of climb speed, best rate of climb speed, and absolute ceiling of Chang Gong-91 using drag polar data reduction method from sawtooth climb flight data. Also we compare the form drag coefficient from the results of climb performance and Oswald's effectiveness coefficient to design values using lift-drag curve of light airplane.