• Journal of Microbiology and Biotechnology
• /
• v.11 no.4
• /
• pp.607-613
• /
• 2001

The biodegradation rates of diesel oil by a selected diesel-degrading bacterium, Pseudomonas stutzeri strain Y2G1, and microbial consortia composed of combinations of 5 selected diesel-degrading bacterial were determined in liquid and soil systems. The diesel degradation rate by strain Y2G1 linearly increased $(R^2=0.98)$ as the diesel concentration increased up to 12%, and a degradation rate as high as 5.64 g/l/day was obtained. The diesel degradation by strain Y2G1 was significantly affected by several environmental factors, and the optimal conditions for pH, temperature, and moisture content were at pH8, $25^{\circ}C$, and 10%, respectively. In the batch soil microcosm tests, inoculation, especially in the form of a consortium, and the addition of nutrients both significantly enhanced the diesel degradation by a factor of 1.5 and 4, respectively. Aeration of the soil columns effectively accelerated the diesel degradation, and the initial degradation rate was obviously stimulated with the addition of inorganic nutrients. Based on these results, it was concluded that the major rate-limiting factors in the tested diesel-contaminated soil were the presence of inorganic nutrients, oxygen, and diesel-degrading microorganisms. To resolve these limiting parameters, bioremediation strategies were specifically designed for the tested soil, and the successful mitigation of the limiting parameters resulted in an enhancement of the bioremediation efficiency by a factor of 11.

• Journal of Power System Engineering
• /
• v.10 no.3
• /
• pp.58-66
• /
• 2006

The effect of bath composition, plating condition and plating rate on the magnetic properties of electroless Ni-Cu-P deposits were investigated. With increasing $CuSO_4$ concentration in the bath, plating rate increased, while the Br value of deposits decreased Sharply. Plating rate increased up to 34% with the addition of 200ppm of NaF and 0.8ppm of Thiourea to the bath. Plating reaction had been ceased by the increase of pH above 11.3, bath temperature higher than $90^{\circ}C$ and under $70^{\circ}C$. The Br value of deposit was uniform with various concentration of complexing agent (Sodium citrate, Ethylenediamine) in the bath. The Br value of deposit was almost equal to that found by the addition of stabilizer(Thiourea) and accelerator(NaF). The Br value of deposit was uniform in plating time(120 min) and heat treatment temperature(below $200^{\circ}C$), and were confirmed to have adequate bath stability for practical use.

• Textile Coloration and Finishing
• /
• v.8 no.4
• /
• pp.42-51
• /
• 1996

Alkaline hydrolysis to improve the hand of PET/acetate union fabric was studied in relation to skin saponification and retarding effect of salts on the alkaline hydrolysis of cellulose acetate fiber, accelerating effect of salts on the alkaline hydrolysis of PET fiber, and changes of total hand value(T.H.V) of PET/acetate union fabric treated with alkali/salt solution. It was found that the rate of saponification of acetate was delayed by the addition of salts such as LiCl, NaCl and CH$_{3}$COONa into NaOH solution below 10 minutes. The rate of shrinkage of acetate fabric treated with 5g/l NaOH solution at 9$0^{\circ}C$ and 60 minutes showed 20 % but it was decreased 8% by. the addition of 120g/l Concentration of inorganic salts. We could know that the rate of alkaline hydrolysis of filament yarn treated with alkali solution at 9$0^{\circ}C$ and 60 minutes was delayed about 3 % using 2,000T/M of hard twist yarn, especially acetate filament treated with alkali solution at 9$0^{\circ}C$ and 10 minutes was delayed about 10%. T.H.V. of PET/acetate union fabric was increased from 2.77 to 3.04~3.18 by the addition of salts into alkali solution.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.495-496
• /
• 2008

The magnetic characteristics of Mg-Zn ferrite that was fired at $1150^{\circ}C$ for 1hour and sintered at $1250^{\circ}C$ for 3hours was examined. The composition ratio of the ferrite was changed after sintering. In that case the composition ratio of ${Fe_2}{O_3}$ was increased but that of CuO was decreased. When the addition quantity of CuO was 3.8 mole%, it's shrinkage rate had maximum value. Magnetic permeability was decreased as the addition rate of CuO was increased and MgO was decreased. When the composition rate of CuO was 2.3 mol% and MgO was 10.9 mol%, the firing density had maximum value. In case that CuO was 2.8mol% and MgO was 10.4mol%, PL had minimum value.

• Journal of Food Hygiene and Safety
• /
• v.11 no.1
• /
• pp.11-16
• /
• 1996

The removal of residual captan in carrot and by storage temperatures and the addition of condiments was investigates. The quantities of residual captan after sticking and drying of captan in carrot and kale wer 0.958 and 23.12 ppm, respectively. During storage of 20days at 15,3 and -17$^{\circ}C$, the levels of the residual captan in carrot decreased to 0.008 (removal rate: 99.2%) and 15.06 ppm (42.3%), respectively. The higher removal rate of residual captan was oberved at the higher storage temperatures, When the condiments of soy sauce, green onion, garlic and vinegar added to the carrot which contaminated with the captan and then stored at 15$^{\circ}C$ for 24hrs, the residual levels of captan decreased to 0.207 (removal rate: 78.4%), 0.196 (79.5$^{\circ}C$), 0.164 (82.8$^{\circ}C$) and 0.209 ppm (78.2%), respectively, showing the garlic was the most effective. However, the residual levels in tale were 2.27 (91.3%), 12.70 (51.4%), 16.42 (37.1%) and 13.70 ppm (47.5%), respectively under the same condition, indication the soy sauce was the most effective. The removal rates of residual captan in carrot and kale were significantly higher with the addition of the condiments than those of the controls that without the condiments.

• KSBB Journal
• /
• v.26 no.3
• /
• pp.206-210
• /
• 2011

The growth effect of Nannochloropsis oculata (N.oculata), unicellular microalgae, by alginate was investigated. Alginate was depolymerized with sulfuric acid ($H_2SO_4$) and heat ($121^{\circ}C$), simultaneously. Addition of 0.75% alginate oligomer depolymerized with 0.2 N $H_2SO_4$ showed the maximum yield and the growth rate of N. oculata. Chlorophyll content and reducing sugar was increased by alginate oligomer in a dose-dependent manner. Alginate oligomer promoted the growth of N. oculata, whereas the original alginate polysaccharides had no significant effect. Laminaria japonica (L. japonica) extract containing high level of alginate was also increased growth rate and chlorophyll content. $CO_2$ supply addition to L. japonica extract showed no change the growth rate, although addition to alginate oligomer showed prominently increased. N. oculata could use more saccharides in presence of $CO_2$ according to reducing sugar determination. From these results, it is useful to establish optimal condition for high cell density cultivation of N. oculata.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.3
• /
• pp.279-285
• /
• 2008

CNC (Carbon Nano Colloid) was used as an additive to the positive electrode to improve the discharge performance of sealed lead-acid batteries, The cathode active material ($PbO_2$) has a relatively low utility of less than 60 % compared with other kind of batteries, such as Ni-MH and Lithium ion, In this study, to overcome the above-mentioned problem we investigated the effects of CNC addition on the enhancement of electrical connection with not-utilized $PbO_2$ and resultantly electrical conductivity of electrode, We examined low rate discharge capacities, high rate discharge capacities and internal resistances of the batteries containing various amounts of CNC. From these results, we found out that the addition of CNC into the positive electrode made a significant improvement in high rate discharge capacity, We also suggested the optimum content of CNC material in positive electrode.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.7
• /
• pp.776-779
• /
• 1998

Second-order rate constants have been measured spectrophotometrically for the addition reaction of a series of alicyclic amines to 3-butyn-2-one to yield their respective enamines at 25.0 'C. The reactivity of the amines increases with increasing the basicity of the amines. However, the Bronsted-type plot obtained exhibits a downward curvature as the basicity of the amines increases, i.e. βnuc decreases from 0.3 for low basic amines (pKa < 9) and to 0.1 for highly basic amines (pKa > 9). Such a curvature in the Bronsted-type plot is clearly indicative of a change in the reaction mechanism or transition state structure. From the corresponding reactions run in D2O, the magnitude of kinetic isotope effect (KIE) has been calculated to be about 0.8 for highly basic amines and 1.21 for weakly basic amines. The difference in the magnitude of KIE also supports a change in the reaction mechanism or transition state structure upon changing the basicity of the amines. Furthermore, the small KIE clearly suggests that H+ transfer is not involved in the rate-determining step, i.e. the addition reaction is considered to proceed via a stepwise mechanism in which the attack of the amines to the acetylene is the rate-determining step. The curvature in the Bronsted-type plot has been attributed to a change in the degree of bond formation between the amine and the acetylene.

• Asian Journal of Business Environment
• /
• v.10 no.1
• /
• pp.29-36
• /
• 2020

Purpose: This study aims to analyze the effect of macroeconomic and non-macroeconomic determinants of capital flight. Research design, data and methodology: With five determinants, this survey was conducted by Eviews 10, and the ordinary least squares (OLS) as a statistical method was applied for examining the research hypothesis. The five determinants are a budget deficit, economic growth, inflation rate, the exchange rate, and sovereign rating. The capital flight measurement uses the World Bank residual approach. The data derive from the Central Bank of Indonesia, BPS-Statistics Indonesia, OECD, and Moody's Investor Service. Results: The result considers that economic growth, the exchange rate, and the sovereign rating will decrease capital flight. In addition, the budget deficit and the inflation rate will increase capital flight. The sovereign rating decreases capital flight bigger than the other determinants. In addition, the exchange rate is statistically significant. Conclusions: The most influential problem of capital flight in Indonesia is because of non-macroeconomics factor political issue, corruption, bad regulation, and others. That's why the investment climate in Indonesia is still not secure. We propose that the regime would have to amend the business rule for reducing capital, raising the investment climate, and demonstrating the creative industry.

• Clean Technology
• /
• v.15 no.2
• /
• pp.75-80
• /
• 2009

In order to separate oxygen from air, the effects of feed gas flow rate and rinse gas flow rate on the product purity and flow were examined using 2 bed PSA with 4 step cycle. The addition of product pressurization step increased the product purity and flow rate. The addition of pressure equalization increased the product flow rate. The test product was manufactured and the purity and flow rate of product oxygen was examined. The results were compared with the commercial medical oxygen generator of 5 ${\ell}/min$ and 90% oxygen purity.