• Journal of environmental and Sanitary engineering
• /
• v.15 no.4
• /
• pp.84-90
• /
• 2000

5L laboratory-scale anaerobic digester was used to study the effects of food size and washing rate of food waste on the mixed digestion with sewage sludge. Food waste was crushed with particle diameters of 4mm and 2mm and washed two to three times, and seven to eight times before feeding the batch digester. The digester with crushed of washed food waste showed better performance than that with uncrushed of unwashed to produce methane gas of reduce volatile solids. The digester with 2mm food waste showed 17.4% higher VS/TS reduction rate and 18ml higher methane production rate per gram VS input than that with uncrushed food waste, where VS and TS are volatile solid and total solids in the liquid effluent, respectively. Also food waste crushed eight times gave 8% higher VS/TS reduction rate and 11ml higher methane production rate per gram VS input than unwashed food waste.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.14 no.1
• /
• pp.53-53
• /
• 1989

Generally, the standard sizes of military combat fatigues should be determined by considering the coverage rate in order to minimize the military personnel who can't put on the ready made military combat fatigues. The coverage rate should be increased by the longer interval of the standard size but the satisfactory rate will be decreased due to the longer interval of size. This study develops a method selecting optimal standard sizes of the military combat fatigues in order to maximize the satisfactory rate that insures the coverage rate to meet a given level for ready made military combat fatigues. This method selects candidate standard sizes at second and finally, establishes a 0-1 integer programming model. The result shows that the method increases both coverage and satisfactory rate more than those of the previous method.

• Korean Management Science Review
• /
• v.14 no.1
• /
• pp.53-66
• /
• 1997

Generally, the standard sizes of military combat fatigues should be determined by considering the coverage rate in order to minimize the military personnel who can't put on the ready made military combat fatigues. The coverage rate should be increased by the longer interval of the standard size but the satisfactory rate will be decreased due to the longer interval of size. This study develops a method selecting optimal standard sizes of the military combat fatigues in order to maximize the satisfactory rate that insures the coverage rate to meet a given level for ready made military combat fatigues. This method selects candidate standard sizes at second and finally, establishes a 0-1 inter programming model. The result shows that the method increases both coverage and satisfactory rate more than those of the previous method.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.3
• /
• pp.323-327
• /
• 1999

It was shown that brain-derived neurotrophic factors (BDNFs) secreted from human neuroblastoma cells can significantly improve the growth of the neurites of PC12 nerve cells. The addition of purified BDNFs elongated the neurites of PC 12 nerve cells two to three times more than the case where the addition was not made. The perfusion rate strongly affected the change of the size of human neuroblastoma cells because the cell size decreased as the perfusion rate increased. This could also influence the productivity of BDNF from the cells. It is also important to note that the BDNF production was decreased when the cell size was reduced. BDNF production rate also decreased at a fast perfusion rate in a smaller cell size. At the relatively fast perfusion rate of 18 ml/h, the ratio of apoptotic to necrotic cells dramatically decreased, which possibly caused the decrease of BDNF production. It has been proven that the secretion of BDNF from human neuroblastoma cells was a partially growth-related process by yielding 6.2$\times l0^{-8}/g$ of BDNF/cell/h of growth related parameter and $0.48{\times}l0^{-9}/g$ of BDNF/cell/h of nongrowth-related parameter in a growth kinetic model. In addition, it was also found that the perfusion rate played a very important role in controlling the cell death mechanism.

• Korean Journal of Materials Research
• /
• v.30 no.2
• /
• pp.51-56
• /
• 2020

In this study, three kinds of metal chills such as SS400, AC4CH and brass, with different thicknesses of 40 ~ 80 mm, were applied for low pressure casting of Al-Si alloy to control cooling rate. The microstructural characteristics with increasing cooling rate were represented using factors including D₁, D₂, size of primary α phases and shape factor and size of eutectic Si. The tensile properties were investigated and additionally analyzed based on the microstructural characteristics. As the cooling rate increased, D₁, D₂, and sizes of primary α phases and eutectic Si apparently decreased and the shape factor of eutectic Si increased to over 0.8. The ultimate tensile strength (UTS) and yield strength (YS) increased with decreasing D₁, D₂, and size of primary α phases, while elongation increased with decreasing size of eutectic Si and concurrently increasing shape factor of eutectic Si. This indicated that the primary α phases and eutectic Si in Al-Si alloy were refined with increasing cooling rate, resulting in improvement of UTS and YS without sacrificing elongation. After the tensile test, preferential deformation of primary α phases was observed in the Al-Si alloy produced at higher cooling rates of more than 0.1 K/s.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.12
• /
• pp.3377-3385
• /
• 1994

This paper introduces empirical correlations to obtain the gas/liquid flow rates and the spray drop size of low viscosity liquid injected by Y-jet twin-fluid atomizers. The gas flow rate is well correlated with the gas injection pressure and the mixing point pressure, based on the compressible flow theory. Similarly, the liquid flow rate is determined by the liquid injection pressure and the mixing point pressure, and a simple correlation for the liquid discharge coefficient at the liquid port was deduced from the experimental results. The mixing point pressure, which is one of the essential parameters, was expressed in terms of the gas/liquid flow rate ratio and the mixing port length. Disintegration and atomization mechanisms both within the mixing port and outside the atomizer were carefully re-examined, and a "basic" correlation form representing the mean diameter of drops was proposed. The "basic" correlation was expressed in terms of the mean gas density within the mixing port, gas/liquid mass flow rate ratio and the Weber number. Though the correlation is somewhat complicated, it represents the experimental data within an accuracy of ${\pm}15%$.EX>${\pm}15%$.

• Journal of Korea Foundry Society
• /
• v.8 no.3
• /
• pp.271-281
• /
• 1988

Al-bronze has a good mechanical property, corrosion resistance and castability, so being highlighted for the new copper alloy. So, effects of alloy composition and cooling rate in the mechaincal properties and solidification behavior have been investigated. The results obtained are as follows; 1) Change in volume on solidification is larger in metal mold casting than in sand mold casting. And it decreases by the addition of Al. 2) The mechanical property in metal mold casting is superior to the one in sand mold casting, and the inclination is obvious up to 9% Al, after heat-treatment ($885^{\circ}C$, $1.5hrs\;{\rightarrow}\;W\;{\cdot}\;Q\;{\rightarrow}\;540^{\circ}C$, 3hrs) 3) By adding Al, the mechanical property is slightly increased up to 9% Al, Above 9% Al, it is increased rapidly, and is accelerated by adding Fe. 4) Cooling rate and hardness, and grain size and cooling rate are related as follows in the range of $1100^{\circ}C$ to $1200^{\circ}C$ pouring temperature. Grain size(${\mu}m$)=$929.6422{\times}cooling\;rate(^{\circ}C\;/\;sec)^{-0.51537}$ Hardness(BHN)=$765.45713{\times}grain\;size({\mu}m)^{-0.31058}$.

• Ocean and Polar Research
• /
• v.26 no.3
• /
• pp.465-473
• /
• 2004

Five parameters such as the entrance size of the front wall, conduit size, wave period, wave height and the width of water pool were selected to estimate the inflow rate, which is basic and essential input data to design seawater exchange breakwater with a submerged mound by conducting hydraulic model experiments. In the results of multiple regression analysis, log-log equation showed a good agreement rather than linear equation and the estimation of inflow rate was well done with only two parameters except entrance size of the front wall, wave period and the width of water pool. Finally, non-dimensional flow rate equation is derived.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.1
• /
• pp.65-70
• /
• 2022

As fast storage has become popular, the memory management system designed for hard disks needs to be reconsidered. In this paper, we observe that memory access latency is sensitive to the page size when fast storage is adopted. We find the reason from the TLB miss rate, which has the increased impact on the memory access latency in comparison with the page fault rate, and there is trade-off between the TLB miss rate and the page fault rate as the page size is varied. To handle such situations, we model the page fault rate and the TLB miss rate accurately as a function of the page size. Specifically, we show that the power fit and the exponential fit with two terms are appropriate for fitting the TLB miss rate and the page fault rate, respectively. We validate the effectiveness of our model by comparing the estimated values from the model and real values.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.6
• /
• pp.703-712
• /
• 2018

The sound absorption property, hand feel, air permeability and pore size of 25 kinds of traditional Korean natural wallpapers (Hanji) were measured and analyzed in this study. The sound absorption rate of Hanji became larger with increasing of frequency beginning from 3.2 kHz, reached 2 times in frequency range of nearby 4 kHz. The sound absorption rate of Hanji was increased as the permeability was lowered and the pore size was decreased. The sound absorption property of Hanji wallpaper could be improved by manufacturing process such as super calendering process.