• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.952-955
• /
• 1996

It is difficult to determine the feeding rate of coagulant in water treatment process, due to nonlinearity, multivariables and slow response characteristics etc. To deal with this difficulty, the fusion of genetic algorithms and fuzzy inference system was used in determining of feeding rate of coagulant. The genetic algorithms are excellently robust in complex operation problems, since it uses randomized operators and searches for the best chromosome without auxiliary information from a population consists of codings of parameter set. To apply this algorithms, we made the look up table and membership function from the actual operation data of water treatment process. We determined optimum dosages of coagulant (PAC, LAS etc.) by the fuzzy operation, and compared it with the feeding rate of the actual operation data.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.8
• /
• pp.849-853
• /
• 2014

In micro-scale electromechanical systems, the power to perform accurate position sensing often greatly exceeds the power needed to generate motion. This paper explores the implications of sampling rate and amplifier noise density selection on the performance of a system identification algorithm using a capacitive sensing circuit. Specific performance objectives are to minimize or limit convergence rate and power consumption to identify the dynamics of a rotary micro-stage. A rearrangement of the conventional recursive least-squares identification algorithm is performed to make operating cost an explicit function of sensor design parameters. It is observed that there is a strong dependence of convergence rate and error on the sampling rate, while energy dependence is driven by error that may be tolerated in the final identified parameters.

• Journal of Forest and Environmental Science
• /
• v.32 no.1
• /
• pp.55-67
• /
• 2016

This paper investigated policies that drive the sustainable management of Ivorian forest which disappear at an annual rate of 250000 hectares. Based on an inter-temporal model for optimum allocation of forest land to three competing uses, the article found that sustainability depends on the incentive structure, of which forest taxes and fees are a key, though obviously not the sole, component. The study proposed to increase the area fee level by accounting for environmental externalities generated by forest harvesters and farmers. The paper showed that the area fee is a decreasing function of the forest natural rate of regeneration and the reconversion rate of agricultural surfaces. Finally, at the given forest natural rate of regeneration and the reconversion rate of agricultural surfaces, the model argued that the area fee need to be progressive (arithmetic progression) in the context of ecological equilibrium break while it should remain constant in normal situation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.7
• /
• pp.876-882
• /
• 1999

It is difficult to determine the feeding rate of coagulant in the water treatment process, due to nonlinearity, multivariables and slow response characteristics, etc. To deal with this difficulty, the genetic-fuzzy system was used in determining the feeding rate of the coagulant. The genetic algorithms are excellently robust in complex optimization problems. Since it uses randomized operators and searches for the best chromosome without auxiliary informations from a population consists of codings of parameter set. To apply this algorithms, we made the lookup table and membership function from the actual operation data of the water treatment process. We determined optimum dosages of coagulant(LAS) by the fuzzy operation, and compared it with the feeding rate of the actual operation data.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.154-156
• /
• 2005

In the device structure of ITO/tris (8-hydroxyquinoline) aluminum(Alq3)/Al, we investigated the Organic Light-Emitting Diodes (OLEDs) properties as a function of the deposition rate of the $Alq_3$. The deposition rate was from 0.5 to 2.0 $[{\AA}/s]$ in a base pressure of $5{\times}10^{-6}$ [Torr]. It was found that a $Alq_3$ deposition rate of around 1.5 $[{\AA}/s]$ is the optimum for the maximum luminous properties. The optimum deposition rate of $Alq_3$ is 1.5 $[{\AA}/s]$.

• Journal of Welding and Joining
• /
• v.12 no.3
• /
• pp.82-89
• /
• 1994

In this paper the effect of stress ratio on the fatigue crack growth rate of aluminum alloy A5083-O was examined. The fatigue tests were carried out using CCT (center cracked tension) specimens and CT(compact tension) specimens which were subjected to 0.5 and -1.0 stress ratio respectively. The obtained results are as follows; 1) The $\DeltaK_{th}$ as the function of stress ratio R was introduced in evaluating the fatigue crack growth rate of A5083-O. 2) A new model evaluating the effect of stress ratio on the fatigue crack growth rate was developed over the region of low and high propagation rate.

• Phonetics and Speech Sciences
• /
• v.10 no.2
• /
• pp.45-50
• /
• 2018

The vowel/consonant ratio is a well-known cue for the voicing of postvocalic consonants. This study investigates how this ratio changes as a function of speaking rate. Seven speakers of North American English read sentences containing target monosyllabic words that contrasted in coda voicing at three different speaking rates. Duration measures were taken for the voice onset time (VOT) of the onset consonant, the vowel, and the coda. The results show that the durations of the onset VOT and vowel are longer before voiced codas, and that the durations of all segments increase monotonically as speaking rate decreases. Importantly, the vowel/consonant ratio, a primary acoustic cue for coda voicing, was found to pattern asymmetrically for voiced and voiceless codas; it increases for voiced codas but decreases for voiceless codas with the decrease in speaking rate. This finding suggests that there is no stable ratio in the duration of preconsonantal vowels that is maintained in different speaking styles.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.7
• /
• pp.1505-1514
• /
• 1997

In this paper, a temporally adaptive layered image sequence coding technique employing H.261 is proposed. In the proposed technique, the frame rate of the base layer is adjusted according to the temporal activity measure based on the rate-distortion function. The base layer is encoded using the H.261. Then, the full frame-rate error image is formed by comparing the original image and the interpolated version of the reconstructed base layer image. The enhancement layer is algo encoded using H.261 but with leaky prdiction to provide robust error resilience. The simulation results show that the proposed technique provides better performance than the twin-H.261 with leaky prediction in both the fixed-rate and variable-rate systems.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.4E
• /
• pp.43-50
• /
• 1999

A fast converging coding algorithm that adaptively selects the modes of macroblocks is introduced. For a given frame, the optimal modes are selected based on the decision curves that minimize the overall distortion at a given bit rate. The method proposed in this paper is different from the conventional ones in that it does not manipulate the quantizer to meet the target bit rate but it satisfies the target bit rate by finding optimal modes of macroblocks which result consistent visual quality. Lagrange multiplier of the unconstrained cost function is controlled to trigger decision curves to generate appropriate modes to meet bit rate and the curve is obtained by utilizing simulated annealing optimization technique. The algorithm is implemented within H.261 video codec and simulation results demonstrate superior visual quality.

• Journal of Powder Materials
• /
• v.6 no.1
• /
• pp.75-80
• /
• 1999

The formation of $n-TiO_2$ powder by oxidation of Ti-ethoxied vapor in a flat flame burner reactor maintained under 20 torr has been studied. The produced powder were characterized in terms of crystal structure, chemical composition by XRD and TEM. The results showed that the powder consisted of loose agglomerated anatase and rutile particles and their size were about 10 nm and 20 nm, respectively. In the course of synthesis, changes of the flame color were happened to each condition during heating up the bubbler. The flame color transition phenomena reveled that a critical precursor delivery rate was needed for the powder formation (obtainable powder yield). The critical precursor delivery rate was estimated by a simple function of the bubbler temperature and the carrier gas flow rate. The critical precursor delivery rate was reviewed as an important variable of the nanopowder synthesis.