• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권1호
• /
• pp.61-66
• /
• 2006

The simple Langmuir isotherm is frequently employed to describe the equilibrium behavior of protein adsorption on a wide variety of adsorbents. The two adjustable parameters of the Langmuir isotherm - the saturation capacity, or $q_m$, and the dissociation constant, $K_d$ - are usually estimated by fitting the isotherm equation to the equilibrium data acquired from batch equilibration experiments. In this study, we have evaluated the possibility of estimating $q_m$ and $K_d$ for the adsorption of bovine serum albumin to a cation exchanger using batch kinetic data. A rate model predicated on the kinetic form of the Langmuir isotherm, with three adjustable parameters ($q_m,\;K_d$, and a rate constant), was fitted to a single kinetic profile. The value of $q_m$ determined as the result of this approach was quantitatively consistent with the $q_m$ value derived from the traditional batch equilibrium data. However, the $K_d$ value could not be retrieved from the kinetic profile, as the model fit proved insensitive to this parameter. Sensitivity analysis provided significant insight into the identifiability of the three model parameters.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.291-292
• /
• 2006

This paper presents rate-distortion optimization that is considered sequence statistics(complexity) to choose the best macroblock mode decision in H.264. In previous work, Lagrange multiplier is derived by the function of constant value 0.85 and QP so that is not the proper Lagrange multilplier for any image sequence. The proposed algorithm solves the problem by changing constant value 0.85 into adaptive value which is influenced by image complexity, and by reducing the encoder complexity to estimate the image statistics with the multiplication of transformed, quantized rate and distortion. Proposed algorithm is achieved the bit-rate saving up to 5% better than previous method.

• 대한기계학회논문집
• /
• 제9권5호
• /
• pp.548-554
• /
• 1985

본 논문에서는 디이젤기관의 연소소음의 저감을 최종목표로 하여 Wiebe의 연 소함수에 의해 근사시킨 열발생속도의 변화가 디이젤기관의 연소소음 및 도시열효율에 미치는 영향에 관하여 수치실험을 통하여 해석검토하였다.

• 한국물환경학회지
• /
• 제24권3호
• /
• pp.311-316
• /
• 2008

This study aimed to obtain equilibrium concentration on adsorption removal of ammonia nitrogen by activated carbon, to express the adsorption characteristics following Freundlich isotherm and also, based on the value obtained, to investigate the relationship between physical characteristics of activated carbon and dynamics of ammonia nitrogen removal by obtaining rate constant and effective pore diffusivity. The results summarized from this study are as follows. It was noted that powdered activated carbon showed better adsorption ability than granular activated carbon. The value of constant (f) of Freundlich isotherm of powered activated carbon was $4.6{\times}10^{-8}$ which is bigger than that of granular activated carbon. The adsorption rate constant on ammonia nitrogen of powered activated carbon with high porosity and low effective diameter was highest as 0.416 hr-1 and the effective pore diffusivity ($D_e$) was lowest as $1.17{\times}10^{-6}cm^2/hr$, and the value of ammonia nitrogen adsorption rate constant of granular activated carbon was $0.149{\sim}0.195hr^{-1}$. It was revealed that, with the same amount of dosage, the adsorptive power of activated carbon with lower effective diameter and bigger porosity was better and its rate constant was also high. With a little adsorbent dosage of 2 g, there was no difference removal ability of ammonia nitrogen as change of adsorption properties.

• 한국물환경학회지
• /
• 제26권3호
• /
• pp.491-496
• /
• 2010

This study aimed to obtain equilibrium concentration on adsorption removal of phosphorus by activated carbon, to express the adsorption characteristics following Freundlich isotherm and also, based on the value obtained, to investigate the relationship between physical properties of activated carbon and dynamics of phosphorus removal by obtaining rate constant and effective pore diffusivity. The results summarized from this study are as follows. Phosphorus adsorption equilibrium reaching time of powdered activated carbon was reduced as the dosage of activated carbon increases, while granular activated carbon despite increased dosage did not have influence on adsorption equilibrium reaching times of phosphorus as well, taking more than 10 hours. It was also noted that powdered activated carbon showed better adsorption ability than granular activated carbon. The value of constant (f) of Freundlich isotherm of powered activated carbon on phosphorus was 4.26 which is bigger than those of granular activated carbon. The adsorption rate constant on phosphorus of powered activated carbon with low effective diameter and iodine number was highest as $8.888hr^{-1}$ and the effective pore diffusivity ($D_e$) was lowest as $2.45{\times}10^{-5}cm^2/hr$, and the value of phosphorus adsorption rate constant of granular activated carbon was $0.174{\sim}0.372hr^{-1}$, It was revealed that, with the same amount of dosage, the adsorptive power of activated carbon with lower effective diameter was better and its rate constant was also high.

• 한국지반환경공학회 논문집
• /
• 제15권5호
• /
• pp.67-74
• /
• 2014

본 연구에서는 점토의 액성한계에 따른 압밀특성을 연구하기 위하여 일정한 압력으로 예압밀 된 재성형 점토를 이용하여 표준압밀시험과 일정변형률 압밀시험을 수행하였다. 압밀시료들은 카올리나이트에 중량대비 6 %, 9 %, 12 %, 15 %의 벤토나이트를 혼합하여 제작하였으며, 시료들의 액성한계시험을 수행한 결과 각각 77 %, 84 %, 88 %, 91 %의 값을 얻을 수 있었다. 또한 액성한계의 약 2배의 증류수를 첨가 후 충분히 교반하여 0.2 MPa의 일정한 압력조건하에 예압밀시켜 제작하였다. 최근 일반적으로 사용되고 있는 표준압밀시험과 ASTM, D4186-82에 따라 변형률 속도를 0.001 %/min, 0.004 %/min, 0.01 %/min을 적용하여 일정변형률 압밀시험을 수행하고 선행압밀하중을 0.2 MPa의 예압밀압력에 대해서 비교 분석하였다. 그 결과 액성한계가 낮을수록 빠른 변형률 속도에서 선행압밀하중이 예압밀압력과 유사하게 나타났으며, 액성한계가 높을수록 느린 변형률 속도에서 선행압밀하중이 예압밀압력과 유사하게 나타났다.

• 한국연소학회:학술대회논문집
• /
• 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
• /
• pp.115-123
• /
• 2003

Simultaneous measurements of velocity and OH distribution were made using particle image velocimetry(PIV) and planar laser-induced fluorescence(PLIF) of OH radical in turbulent hydrogen nonpremixed flames with coaxial air. The OH radical was used as an approximate indicator of chemical reaction zone. The OH layer was correlated well with the stoichiometric velocity, $U_s$, instantaneously and on average. In addition, high strain-rate regions almost coincide with the OH distribution. The residence time in flame surface, calculated from the root-mean-square value of the radial velocity, is proportional to $(x/d_F)^{0.7}$. It is found that the mean value of principal strain rate on the OH layer can be scaled with $(x/d_F)^{-0.7}$ and therefore, the product of the residence time and the mean strain rate remains constant over all axial positions.

• Bulletin of the Korean Chemical Society
• /
• 제8권2호
• /
• pp.79-83
• /
• 1987

The reduction of a series of 1-substituted benzyl-3-cyanoquinolinium ions (p-$cH_3$, H, p-Br, m-F, p-CN) by sodium borohydride has been investigated. In all cases the products from these reactions were found to be 1, 2-dihydroquinolines over 82% yields. Rates of reduction were measured in basic condition and in solvent system consisting of 4 parts of isopropyl alcohol and 1 part of water by volume. Second order rate constants were obtained for these reactions. When the ratio of [$OH^-$] to [$BH_4^-$] becomes large the observed rate constants ($K_{obs}$) decrease by a small factor. Reaction scheme and rate law are discussed. Bronsted ${\alpha}(=\frac{d\;In\;k}{d\;In\;K})$ obtained by using the value of equilibrium constant K, which was obtained previously, was not 0. Instead, a value of 0.36 was obtained which indicated that the reduction by borohydride was structure-dependent according to the Marcus formalism even though the reaction rate was close to the diffusion limit.

• 대한화학회지
• /
• 제54권2호
• /
• pp.208-214
• /
• 2010

포스포리파제 D(PLD)는 알코올 존재 하에서 포스파티딜 전달반응이 일어나며 동시에 PLD의 전체 반응속도도 증가하는 것으로 알려져 있다. 이 포스파티딜 전달반응을 자세히 구명하기위해 본 실험에서는 양배추에서 정제한 ${\alpha}$-type PLD를 가지고 여러 종류의 알코올 존재 하에서 포스파티딜 전달반응의 반응속도를 검토하였다. 실험 결과 검토한 1차 알코올들에 의해 PLD의 포스파티딜 전달반응 속도는 기대했던 대로 크게 증가하였다. 부탄올의 경우 2차 반응속도는 $33.33{\pm}1.33M^{-1}sec^{-1}$로 얻어졌으며, 이 전달반응 속도를 물의 농도를 고려한 가수분해 속도($0.078M^{-1}sec^{-1}$)와 비교하면 무려 400배 이상의 격차를 보여주었다. 알코올의 $pK_a$과 포스파티딜 전달반응 속도와의 자유에너지 선형 관계로부터 브뢴스테드 ${\beta}_{nu}$ 값 $0.12{\pm}0.03$을 얻었다. 비교적 적은 ${\beta}_{nu}$ 값으로 미루어보아 끊어지는 포스파티딜-효소 중간체(E-P)의 전이상태는 상당히 해리된 상태일 것으로 추정된다. 이들 결과와 양배추 PLD의 활성부위의 히스티딘 잔기를 참작하여 양배추 PLD의 반응메커니즘을 제안하였다.

• 소성∙가공
• /
• 제20권7호
• /
• pp.498-503
• /
• 2011

The strain rate sensitivity index, m, plays an important role in plastic deformation at elevated temperatures. It is affected by strain rate, temperature, and the microstructure of the material. The strain rate sensitivity index has been used as a constant in numerical analysis of plastic forming at a specified strain rate and temperature. However, the value of m varies as deformation proceeds at an elevated temperature and a certain strain rate. Thus, in this present study, the value of m has been characterized as a function of strain by multiple tensile jump tests for AZ31 magnesium alloy sheet, and the variation of m has been discussed in conjunction with the microstructural observations before and after deformation. The experimental results show that the variation of m is dependent on the temperature and strain rate. Grain growth with dynamic recrystallization also affects the variation of m.