• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.172-179
• /
• 2004

Average Bi-directional flow tube was suggested to measure single and two phase flow rate. Its working principle is similar with Pilot tube, however, it makes it possible to eliminate the cooling system which is normally needed to prevent from flashing in the pressure impulse line of Pilot tube when it is used in the depressurization condition. The suggested instrumentation was tested in the air-water vertical test section which has 80mm inner diameter and 10m length. The flow tube was installed at 120 of L/D from inlet of test section. From the test, single air and water flow rate was measured successfully. For the emasurement of two phase flow rate, Chexal drift-flux correlation was used. In the test a new correlation of momentum exchange factor was suggested. The test result shows that the suggested instrumentation using the measured void fraction and Chexal drift-flux correlation can predict the mass flow rates within $10\%$ error of measured data.

• 동아시아경상학회지
• /
• 제10권1호
• /
• pp.95-108
• /
• 2022

Purpose - This study attempts a multifaceted analysis utilizing the Chinese test takers' results of the Economy & Business Aptitude Test. Since Chinese students study socialist theories of economics along with market-based ones, comparing Chinese university students' basic knowledge of economics and business and its application to those of Korean test takers is also very meaningful from the perspective of economics education research. Research design, data, and methodology - This study investigates the results on the test of economy and business understanding between Korea and China. For comparison of the result, we conducted MK-TEST for two universities in China. Result - This study finds that the average correct answer rate of Korea is higher than one of China according to the overall results. The average difference rate is about 15% between Korea and China. More concretely, the correct answer rate of business area is higher than one of economy area, identifying them by subject area. Conclusion - According to the results, this study can infer that there are no or little differences in the ability of examinee to solve applied questions between Korea and China and the differences of the scope and emphasis point in an academic curriculum between both countries might bring these kinds of results. Finally, Chinese students shows higher correct answer rate to the questions about the economy issues and policies related to China than one of Korea examinee.

• International Journal of Advanced Culture Technology
• /
• 제3권1호
• /
• pp.39-45
• /
• 2015

This research aims to study an effect of sodium chloride solution concentration on the corrosion rate of AA1100 aluminium alloy and SGACD zinc coated steel lap joint with a test duration of 30 days and a test temperature of $45^{\circ}$. The summarized results are as follows. Increase of the NaCl solution concentration increased the weight loss of Al, corrosion rate of Al, weight loss of Fe and also decreased the corrosion rate of Fe. Increase of the test duration affected to increase the weight loss and corrosion rate of Al and also decrease the weight loss and corrosion rate of Fe. The corrosion that was formed in a lap joint consisted of the uniform corrosion on the surface of the metals and the galvanic corrosion in the lap area of the joint. The maximum weight loss of AA 1100 aluminium and SGACD zinc coated steel that was occurred in the sodium chloride with 3.25% was 2.203% and 3.208%, respectively.. The maximum corrosion rate of AA 1100 aluminium and SGACD zinc coated steel that was occurred in 4.00% and 3.5% sodium chloride solution was 0.156 mm/year and 0.479 mm/year, respectively.

• 대한금속재료학회지
• /
• 제50권2호
• /
• pp.146-151
• /
• 2012

The present article shows how the fracture strength of single crystal silicon chips, which are generally used as semiconductor devices, is influenced by loading rate variation during a 3-point bending test. It was found that the fracture strength of the silicon chips slightly increases up to 4% with increasing loading rate for loading rates lower than 20 mm/min. Meanwhile, the fracture strength of the chips hardly increases with increase of loading rate to levels higher than 40 mm/min. However, there was an abrupt transition in the fracture strength within a loading rate range of 20 mm/min to 40 mm/min. This work explains through microscopic examination of the fracture surface of all test chips that such a big transition is related to the deflection of crack propagation direction from the (011) [${\bar{1}}00$] system to the (111) [${\bar{2}}11$] system in a particular loading rate (i.e. from 20 mm/min to 40 mm/min).

• The Journal of Asian Finance, Economics and Business
• /
• 제8권1호
• /
• pp.23-36
• /
• 2021

The study explores the nexus between foreign direct investment (FDI), financial innovation, and exchange rate volatility in selected South Asian countries for 1980 to 2017. The study applies the unit root test, Autoregressive Distributed Lagged, nonlinear ARDL, and causality test following Toda-Yamamoto. Unit root tests ascertain that variables are integrated in a mixed order; few variables are stationary at a level and few after the first difference. Empirical model estimation with ARDL, Long-run cointegration revealed with the tests of FPSS, WPSS, and tBDM by rejecting the null hypothesis of "no cointegration." This finding suggests that, in the long-run financial innovation, FDI inflows, and exchange rate volatility move together. Moreover, study findings established adverse effects running from FDI inflows and financial innovation to exchange rate volatility in the long run. These findings suggest that continual FDI inflows and innovativeness in the financial system assist in lessening the volatility in the foreign exchange market. Furthermore, nonlinear ARDL confirms the presence of asymmetric cointegration in the model. The standard Wald test established asymmetric effects running from FDI inflows and financial innovation to exchange rate volatility, both in the long and short run. Directional causality unveils feedback hypothesis holds for explaining causality between FDI, financial innovation, and exchange rate volatility.

• 한국안전학회지
• /
• 제39권2호
• /
• pp.65-74
• /
• 2024

We analyzed the relationship between the normal measurement of the seismic accelerometer (SA) and the error rate of the output voltage linear ratio to propose an evaluation method to determine whether the SA in use is measuring normally. Utilizing a test bed, the regular operation of SA in use was evaluated using acceleration data measured through impact tests since there are no regulations regarding performance testing of SA in use. For the used SA, the error rate of the output voltage linear ratio, which is a major performance criterion, was evaluated. We analyzed common characteristics of the SA that satisfied the impact test and the performance criteria of the output voltage linear ratio error rate. The results indicated that we must consider the decreasing trend and convergence of the error rate as the measurement angle increases, ensuring that the average value of the output voltage linear ratio error rate is within 1%.

• 유공압시스템학회논문집
• /
• 제3권1호
• /
• pp.15-19
• /
• 2006

In this study, a measurement method of leakage flow-rate for pneumatic driving apparatus is proposed. The existing measurement methods of leakage flow-rate of air need disassemble the test component. Therefore, there is no effective method to measure the leakage flow-rate while operating pneumatic driving apparatus. In this study, the leakage flow-rate is measure from the pressure change in an isothermal chamber that can realize isothermal conditions by stuffing steel wool into it. Therefore, wide range of flow-rate could be measured only from the pressure response and the leakage flow-rate can be measured during operating pneumatic driving apparatus. The effectiveness of the proposed method is proved by experimental results.

• 한국보건간호학회지
• /
• 제2권2호
• /
• pp.45-61
• /
• 1988

Clonorchiasis should be realized as an important public health problems in Korea by their wide distribution, high prevalence rate and heavy infection intensity. This study was designed to obtain the infection rate, contributing factors as well as the behavior of infected persons among the factory workers in Pohang area where that parasite still remains as a problem. Study was undertaken from September '86 to October '87. Clonorchiasis skin test was performed for 3180 factory workers, and stools of skin test positive reactors were examined. Praziquantel was prescribed to stool examination positive persons for clonorchis sinensis ova. After one year. stool examination was repeated for them who received medicine. At the same time. a structured questionnaire was given and the results were analyzed and compared with control group. The results of this study are summarized as follows; 1. The infection rate of Clonorchis sinensis. 1) Clonorchiassis skin test positive rate was $26.2\%$ (834/3180). 2) Stool(Clonorchis sinensis ova) positive rate among skin test positive reactors was $21.6\%$ (129/598) All 129 infected persons were male. 2. Contributing factors of Clonorchis sinensis infection. 1) The chance of infection was higher in low-educated peple(p<0.01) 2) Stool(Clonorchis sinensis ova)positive rate was higher among the persons who reside near the riverside now(p<0.01), or among the persons who long history of riverside residence(p<0.01) 3) The infection rate was higher in thoes who like sliced raw fresh water fishes than in those who like cooked fishes(p<0.05). 4) Correct answering rate for questions about the cause and route of Clonorchis sinensis infection was low in infected persons. 5) The infection rate was lower among those who had experience of previous clonorchiasis test(p<0.01). 6) Family members of infected persons show higher rates of infection(p <0.01). 3. Treatment effect and compliance of infected person to treatment. 1) After one year, negative stool conversion rate was $85.4\%$. 2) $70.8\%$ of infected persons took the medicine; Only $3.1\%$ of them consulted to physician to know the medication effect; As many as $29.4\%$ of them continued to consume raw fresh water fishes. As a conclusion, City of Pohang area, Hyung San River in the center, is an endemic area of clonorchiasis. Current clonorchiasis control system seemed to be ineffective; many of the skin test positive group did not submitted their stool for examination; only $70.8\%$ of infected persons took the medicine even though the drugs were given free of charge; $29.4\%$ continued to consume raw fresh water fishes after taking medicine. Therefore. proper education program should be provided to improve the compliance to treatment. Follow-up for infected cases is mandatory to prevent waste of restricted budget.

• 한국표면공학회지
• /
• 제41권3호
• /
• pp.121-128
• /
• 2008

High strength 7xxx aluminum alloys have been applied to automotive bump back beam of the some limited model for light weight vehicle. The aluminum bump back beam is manufactured through extrusion, bending and welding. The residual stress given on these processes combines with the corrosive atmosphere on the road spreaded with corrosive chemicals to melt snow to occur the stress corrosion cracking. The composition of commercial 7xxx aluminum has Zn/Mg ratio about 3 and Cu over 2 wt% for better strength and stress corrosion cracking resistivity. But this composition isn't adequate for appling to the automotive bump back beam with high resistance to extrusion and bad weldability. In this study the composition of 7xxx aluminum alloy was modified to high Zn/Mg ratio and low Cu content for better extrusion and weldability. To estimate the resistivity against stress corrosion cracking of this aluminum alloy by slow strain rate test, the corrosion atmosphere and strain rate separate the stress corrosion cracking from conventional corrosion must be investigated. Using 0.6 Mol NaCl solution on slow strain rate test the stress corrosion cracking induced fracture was not observed. By adding 0.3% $H_2O_2$ and 0.6M $Na_2SO_4$ to 1M NaCl solution, the corrosion potential and current density of polarization curve moved to active potential and larger current density, and on the slow strain rate test the fracture energy in solution was lower than that in pre-exposure. These mean the stress corrosion cracking induced fracture can be estimated in this 1M NaCl + 0.3% $H_2O_2$ + 0.6M $Na_2SO_4$ solution. When the strain rate was below $2{\times}10^{-6}$, the stress corrosion cracking induced fracture start to be observed.

• 에너지공학
• /
• 제23권4호
• /
• pp.73-88
• /
• 2014

Various studies on the critical flow models for sub-cooled and/or saturated water were reviewed, especially on Fauske, Moody, and Henry for basic theoretical models; Zaloudek for insight into physical phenomena for a critical flow in an orifice type flow path; Sozzi & Sutherland for a critical flow test of saturated and sub-cooled water at high pressure for orifice and nozzles; and a Marviken test on a full-scale critical flow test. In addition, critical flow tests of sub-cooled water for the break simulators in integral effect test (IET) facilities were also investigated, and a hybrid concept using Moody's and Fauske's models was considered by the authors. In the comparison of the models for the selected test data, discussions of the effect of the diameters, predictions of the critical flow models, and design aspects of break simulator for SBLOCA scenarios in the IET facilities were presented. In the effect of diameter on the critical flow rate with respect to all dimensional scales, it was concluded that the effect of diameter was found irrespective of diameter sizes. In addition, the diameter effect on slip ratio affecting the critical flow rate was suggested. From a comparison of the critical flow models and selected test data, the Henry-Fauske model of the MARS-KS code was found to be the best model predicting the critical flow rate for the selected test data under study.