• Title/Summary/Keyword: Rare-Earth ion

Search Result 82, Processing Time 0.024 seconds

Extraction of Yttrium and Europium with Fatty Acids as Extractants (지방산계 추출제에 의한 이트륨과 유로피움의 분리)

  • Bang, Kyung-Mo;Ryu, Ho-Jin;Choi, Min-Bae;Kang, Ho-Cheol
    • Applied Chemistry for Engineering
    • /
    • v.21 no.5
    • /
    • pp.509-513
    • /
    • 2010
  • Recently, an amount of waste electronic devices such as LED and trichromatic fluorescent lamp has increased with the development of electronic industry. Reportedly, rare earth metals such as yttrium and europium have been discovered in the waste electronic devices. In order to improve the selectivity of yttrium and europium, the effects of the following factors on recovery experiment have been considered : i) fatty acids with various alkyl chain lengths, ii) the concentration of extractant, and iii) pH. The results show that the extraction efficiencies decrease at the same pH with decreasing the concentration of extractant and so $pH_{0.5}$ (That value of pH in an aqueous phase at which the distribution ratio is unity at equilibrium: 50% of the solute is extracted (E = 0.5) only when the phase ratio is unity.) moves into higher pH. The highest selectivity of yttrium and europium was obtained with tetradecanoic acid as extractant. The extraction mechanism of yttrium and europium was varied with the change of concentration of the tetradecanoic acid. $MR_3$single-species was formed from the yttrium and europium ion in the extractant concentration less than 0.1 M. On the other hand, the yttrium or europium ion is solvated with three molecules of tetradecanoic acid monomer like $MR_3{\cdot}$ 3RH in the extractant concentration more than 0.1 M.

Luminescence Properties of Europium-doped NaSr(PO3)3 Phosphor (Europium이 첨가된 NaSr(PO3)3형광체의 형광특성)

  • Yoon, Changyong;Park, Cheolwoo
    • Journal of the Korean Society of Radiology
    • /
    • v.13 no.4
    • /
    • pp.645-652
    • /
    • 2019
  • Phosphor with phosphorus doped with rare earth ions was investigated by searching Sr and Eu phosphors suitable for substitution of Eu ions with similar ionic radius to polyphosphate host. The $NaSr(PO_3)_3$ phosphor was synthesized by the solid state method and the $NaSr(PO_3)_3:Eu^{2+}$ phosphor was prepared by the carbon thermal reduction method. Both of the phosphors were identified by X - ray diffraction. The excitation and emission spectra of $NaSr(PO_3)_3:Eu^{3+}$ increased fluorescence intensity and intensity quenching with increasing $Eu^{3+}$ concentration. The higher the $Eu^{3+}$ concentration in the emission spectrum, the higher the local symmetry of $Eu^{3+}$ environment. The mechanism of concentration quenching, in which fluorescence decreases due to the energy transfer between $Eu^{2+}$ ions with the closest critical distance between $Eu^{2+}$ ions with increasing $Eu^{2+}$ ion concentration, was confirmed in the emission spectrum of $NaSr(PO_3)_3:Eu^{2+}$ concentration. It is possible to change the fluorescent region through the post-processing of single rare earth ion added phosphors, and it is possible to change the fluorescence by applying the energy transfer and concentration quenching mechanism according to the local symmetry of $Eu^{3+}$ will be used for high phosphor development.

Numerical Study on the Characteristics of High PM2.5 Episodes in Anmyeondo Area in 2009 (2009년 안면도 지역 고농도 PM2.5 특성에 관한 수치 연구)

  • Jeon, Won-Bae;Lee, Hwa Woon;Lee, Soon-Hwan;Park, Jae-Hyeong;Kim, Hyun-Goo
    • Journal of Environmental Science International
    • /
    • v.23 no.2
    • /
    • pp.249-259
    • /
    • 2014
  • This paper investigates the characteristics of high $PM_{2.5}$ episodes occurred at Anmyeondo area in spring time, 2009. The monthly mean $PM_{2.5}$ concentration during April was the highest in the year and especially, high levels of $PM_{2.5}$ exceeding standard regulation level were sustained consecutively during 5 to 13 April. To analyze more detailed $PM_{2.5}$ characteristics, numerical simulations were carried out using CMAQ(Community Multi-scale Air Quality) with IPR(Integrated Process Rate) and DDM-3D(Decoupled Direct Method). $PM_{2.5}$ level was lower in daytime than that in nighttime due to vigorous vertical mixing during daytime. The chemical composition was showed that ratio of primary ion components such as sulfate($SO_4{^{2-}}$), nitrate($NO_3{^-}$) and ammonium($NH_4{^+}$) were nearly half of total amount of $PM_{2.5}$. Aerosol and transport process dominantly contributed to $PM_{2.5}$ concentration in Anmyeondo area and contribution rate of local emissions was nearly zero since Anmyeondo area has rare anthropogenic PM emission sources. DDM-3D analysis result showed that $PM_{2.5}$ in Anmyeondo area was influenced by emissions from Shanghai and Shandong region of China.

Heat Treatment Condition for Preparing $Nd_{1+x}Ba_{2-x}Cu_{3}O_{7-\delta}$ Superconductors

  • Fan Zhan guo;wha, Soh-Dea;zhan, Si-Ping;Li Yingmel;Lim Byongjae
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2001.07a
    • /
    • pp.624-627
    • /
    • 2001
  • Two kinds of Nd$_{1+x}$Ba$_{2-x}$Cu$_3$O$_{7-{\delta}}$, the sintering samples and zone melting samples, were heat treated under pure Ar at 95$0^{\circ}C$. The substitution of Nd ion for Ba ion in the Nd$_{1+x}$Ba$_{2-x}$Cu$_3$O$_{7-{\delta}}$ before and after the heat treatment were investigated by XRD. In order to know the effects of the heat treatment, the T$_{c}$ and J$_{c}$ of samples with the heat treatment and those without the heat treatment by Ar were comparatively studied. The results show that the substitution of Nd for Ba decreased, T$_{c}$, and J$_{c}$ increased after the treatment under Ar at 95$0^{\circ}C$. The Nd$_{1+x}$Ba$_{2-x}$Cu$_3$O$_{7-{\delta}}$ samples were oxygenated under pure oxygen at 30$0^{\circ}C$. From the XRD pattern it was found that the sample with x< 0.4 could transfer from tetragonal phase to orthorhombic phase after the oxygenation, but the sample with x>0.4 could not make the phase transition even after a long time oxygenation.ion even after a long time oxygenation.ation.n.ation.ation.

  • PDF

Technical Trends of Rare Metal Recycling in the Next Generation Automobile (차세대 자동차용 희소금속 리싸이클링 기술동향)

  • Hwang, Young-Gil;Kil, Sang-Cheol;Kim, Jong-Heon
    • Resources Recycling
    • /
    • v.23 no.2
    • /
    • pp.3-16
    • /
    • 2014
  • Car exhaust $CO_2$ gas reduction and fuel efficiency of the car lighter for the current era is a big challenge. The developments of high-performance Nd magnets, Li-ion secondary battery and exhaust gas purification performance of PGM catalysts used in the lightweight EV and HEV are activated. Country in order to improve the car lighter and function that use the resources of rare metals are ubiquitous imported from China because of export supply control, as soaring prices have unstable supply and demand. Compared to the emissions from the next-generation automotive recycling, waste scarce resources need to be. This study investigated the recycling technology analysis and development of the information technology, or delivered to the researchers by giving national car industry aims to contribute to the development. Findings, pulmonary high-performance motor vehicle emissions in the exhaust gas purification PGM Catalysts, Li-ion battery and Nd magnets recycling technology, such as pre- and post-processing techniques to classify technology, pre-urban mining technology mechanical separation by screening techniques under development, the study and post-processing technology has, pyro and hydro metallurgical smelting technology is established. Waste Recycling in terms of economic efficiency of mechanical components for the intensive study of screening techniques is needed.

A Study on the Luminescence Properties of Eu3+ Ions Doped Vanadate (Eu3+ 이온이 첨가된 바나듐산염의 형광특성 연구)

  • Kang, Yeonhee;Yoon, Changyong
    • Journal of the Korean Society of Radiology
    • /
    • v.13 no.3
    • /
    • pp.445-451
    • /
    • 2019
  • The fluorescence intensity and fluorescence lifetime of $Ba_2GdV_3O_{11}$, a vanadate compound based on $Ba^{2+}$ ion, were investigated by adding $Eu^{3+}$ as a rare earth ion which is an alkaline earth metal, which is distributed around active ions and has a large influence on fluorescent properties when used as a host in a phosphor. $Ba_2GdV_3O_{11}:Eu^{3+}$ phosphor was synthesized by solid state method and the crystallinity of the phosphor was confirmed by X - ray diffraction analysis. The fluorescence properties of the $Ba_2GdV_3O_{11}:Eu^{3+}$ phosphor were measured using optical and laser. The energy transfer and diffusion of the $Ba_2GdV_3O_{11}:Eu^{3+}$ phosphor are highly dependent on the concentration of $Eu^{3+}$. When the concentration of $Eu^{3+}$ is low, it shows strong fluorescence to the CT band. However, as the concentration of $Eu^{3+}$ increases, the fluorescence due to 4f - 4f transition is strong. The concentration of $Eu^{3+}$ ion increased and the energy between ions was diffused, and the lifetime of fluorescence decreased. Energy transfer occurs between two $Eu^{3+}$ ions at low $Eu^{3+}$ concentration and energy diffusion occurs at high $Eu^{3+}$ concentration.

A Study on the Adsorption of Rare Earth Elememts by Raw and Crosslinked Chitosan (천연 및 가교 키토산에 의한 희토류 원소의 흡착과 회수에 관한 연구)

  • Cho, Sung-Ill;Choi, Jong-Moon;Kim, Young-Sang;Lee, Sueg-Geun
    • Analytical Science and Technology
    • /
    • v.17 no.2
    • /
    • pp.108-116
    • /
    • 2004
  • The adsorption characteristics of raw and crosslinked chitosan for rare earth elements (REEs) have been studied. The range of optimum pH for the maximum adsorption was observed: pH 4.5~5.5 for $Nd^{3+}$, $Tm^{3+}$ on raw and crosslinked chitosan; pH 4.0~5.5 for $La^{3+}$ and $Ce^{3+}$ on crosslinked chitosan and pH 2.0 for those on raw chitosan. The adsorption rate of REE at pH 4.0 has been found in the order of $Er^{3+}$ > $Gd^{3+}$ > $Yb^{3+}$ > $Nd^{3+}$ > $Lu^{3+}$ > $Eu^{3+}$ > $Tm^{3+}$ > $Ho^{3+}$ > $Dy^{3+}$ > $La^{3+}$ > $Ce^{3+}$ > $Y^{3+}$ > $Pr^{3+}$ in single metal system and that of $Lu^{3+}$ > $Yb^{3+}$ > $Tm^{3+}$ > $Dy^{3+}$ > $Ho^{3+}$ > $Er^{3+}$ > $Eu^{3+}$ > $Gd^{3+}$ > $Nd^{3+}$ > $Y^{3+}$ > $La^{3+}=Ce^{3+}=Pr^{3+}$ in multi metal system. In the competitive adsorption of multi metal system, the amount of metal adsorption generally increased with increasing atomic number and with decreasing ionic radius. On the adsorption studies of metal ions on chitosan, the time of equilibrium adsorption which was reached at the maximum adsorption was about 5 hours. 83~95 % for $Nd^{3+}$ ion and 90~106 % for $Tm^{3+}$ ion, were recovered from the crosslinked chitosan.

Synthesis and luminescence properties of lanthanum oxides/hydroxides nanorod bundles

  • Hussain, Sk. Khaja;Raju, G. Seeta Rama;Yu, Jae Su
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2015.08a
    • /
    • pp.171.2-171.2
    • /
    • 2015
  • Nowadays, trivalent rare-earth ($RE^{3+}$) ions activated metal oxides have been proved to be excellent host materials due to their various applications. Facile wet-chemical technique have been considered as the best synthetic route due its intensive interest in the preparation of nanostructures. Europium ion doped lanthanum hydroxide ($La(OH)_3:Eu^{3+}$) phosphors were synthesized by the facile wet chemical method using the hexamethylenetetramine (HMTA) as a mediated surfactant. The thermal behavior for the $La(OH)_3:Eu^{3+}$ phosphors was investigated by thermogravimetric and differential thermal analysis method. The morphological studies were measured by scanning electron microscope and transmission electron microscope measurements, indicating three-dimensional (3D) flower-like $La(OH)_3:Eu^{3+}$ nanorod bundles. After subsequent annealing process, the lanthanum oxide ($La_2O_3:Eu^{3+}$) phosphor exhibited similar kind of morphology. The synthesized $La(OH)_3:Eu^{3+}$ and $La_2O_3:Eu^{3+}$ samples were characterized by X-ray powder diffraction and Fourier transform infrared spectroscopy. Furthermore, photoluminescence and cathodoluminescence properties were studied in details.

  • PDF

A study on the alexandrite-like cubic zirconia single crystal by skull melting method (스컬법에 의한 alexandrite-like cubic zirconia 단결정성장에 관한 연구)

  • 석정원;최종건
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.13 no.5
    • /
    • pp.205-210
    • /
    • 2003
  • Alexandrite-like cubic zirconia single crystals were grown by skull melting method. The R.F. generator (output power is 35 ㎾) used for skull melting was operated at 2 MHz. The grown crystals were doped with up to 1 or 1.5 wt% and 0.5 or 1 wt% of rare earth metal ion (Pr, Nd) on$ ZrO_2-Y_2O_3$ (12 mol%). The grown crystals were cut for slice (0.25 mm) and round brilliant (12 mm in diameter). The cut stones were heat treated in air and nitrogen at $1000^{\circ}C$ for 2 hours and their optical absorption spectra ($\lambda$ = 400∼700 nm) data were obtained.

Structure and Electric Properties of PZT Ceramics Substituted by La and Nd (La와 Nd가 치환된 PZT 세라믹의 구조 및 전기적 성질)

  • Jung, Soo-Cheol;Park, Hyu-Bum;Kim, Jeong;Kim, Keon;Kim, Si-Joong
    • Journal of the Korean Ceramic Society
    • /
    • v.31 no.2
    • /
    • pp.155-160
    • /
    • 1994
  • PZT ceramics substituted by La3+ and Nd3+ were fabricated according to the formula: [Pb1-x(La or Nd)x][Zr0.58Ti0.42]1-x/4$\square$x/4O3(x=0.00, 0.02, 0.05, 0.08, 0.15, 0.20). The crystal structure and microstructure were investigated by XRD and SEM. It was observed that the phase transitions among rhombohedral, tetragonal, and cubic symmetry occured as the substitutional quantity increased. Dielectric constant, dissipation factor and piezoelectric coefficient (d33), of each sample were measured. The dielectric properties were changed as the substitutional quanity of rare earth ion increased. These changes could be explained by crystal structure and compositional fluctuaction. Its d33 was higher at tetragonal region near to phase boundry between rhombohedral and tetragonal, which was explained by reorientation of domain wall.

  • PDF