• 제목/요약/키워드: Rare metals

검색결과 213건 처리시간 0.032초

희소금속 재활용을 위한 ITU-T 국제표준 개발현황 (Status of ITU-T International Standard Development on Rare Metal Recycling)

  • 이미혜;최원정;서석준;김범성
    • 한국분말재료학회지
    • /
    • 제23권4호
    • /
    • pp.325-330
    • /
    • 2016
  • Owing to increasing demand of rare metals present in ICT products, it is necessary to promote the rare metal recycling industry from an environmental viewpoint and to prevent climate change. Despite the fact that information for toxic substances is partly indicated, a legal basis and an international standard indicating usage of rare metals is insufficient. In order to address this issue, a newly created study group of environment and climate change at the ITU (International Telecommunication Union) is doing research to develop methodologies for recycling rare metals from ICT products in an eco-friendly way. Under this group, the Republic of Korea has established two international standards related to rare metals present in ICT products. The first is 'Release of rare metal information for ICT products (ITU-T L.1100)' and the other is 'Quantitative and qualitative analysis methods for rare metals (ITU-T L.1101)'. A new proposal for recommending the provision of rare metal information through a label by manufacturers and consumer/recycling businesses has been approved recently and is supposed to be published later in 2016. Moreover, these recommendations are also being extended to IEC, ISO and other standardization organizations and a strategy to reinforce the ability for domestic standardization is being established in accordance with industrial requirements. This will promote efficient recycling of rare metals from ICT products and will help improve the domestic supply of rare metals.

국내 희유금속 수급구조 분석 연구 (Analysis of Structure in the Domestic Supply & Demand of the Raw Materials of Rare Metals)

  • 김유정;이화석
    • 자원리싸이클링
    • /
    • 제23권3호
    • /
    • pp.51-60
    • /
    • 2014
  • 본 연구는 35여종의 희유금속을 대상으로 광석(정광), 금속, 화합물, 스크랩 등 4개 유형으로 광종별 원재료를 범주화하고 교역 구조를 분석하였다. 우리나라 희유금속원재료 교역 규모는 점차 확대되어 교역 증가폭이 GDP 증가폭을 큰 폭으로 상회하고 있다. 희유금속 원재료는 실리콘, 니켈, 크롬, 몰리브덴, 망간 등 철강원료자원 위주로 수입이 주로 이루어지고 있으며 전자공업원료자원 중 인듐, 게르마늄 등은 총교역규모 1억불 이하의 작은 규모로 수입추이변화에 미치는 영향은 제한적이나 연간증가율이 20%를 상회하여 지속적인 수급관리가 필요하다. 수입규모는 수출규모의 약 3배이며 희유금속 원재료 수출입 유형은 국내산업구조 및 수요의 특성에 따라 광종별로 다양한 양상을 보이고 있으나 수입, 수출 모두 상당수가 금속형태로 교역이 이루어지고 있다.

전자부품산업에서의 희소금속의 산업적 특징 (Industrial Feature of Rare Metals in Electronic Components)

  • 김택수;이민하;김범성;최한신;김용환;이효수
    • 마이크로전자및패키징학회지
    • /
    • 제18권2호
    • /
    • pp.1-9
    • /
    • 2011
  • Rare metals, called as vitamins of industry, are defined as the elements which are very few in the earth and are difficult to extract from ores. The requirements for total amounts of rare metals have increased as the global economics grows and the function of electronic components varies considerably. The rare metals have been maldistributed to America, CIS(Commonwealth of Independent States), China, Australia, Canada as about 80% of total natural resources, which also lead to unequal materials flow or distribution. Therefore, it was needed to investigate the feature of rare metals in terms of industry as well as technology. We could identify the industrial issues associated with the supply of critical rare elements in electronic components.

Fusion technology of artifacts considering environmental recycling for sustainability

  • Fujita Toyohisa
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
    • /
    • pp.563-568
    • /
    • 2003
  • Recently, the recycled amount of electric, mechanical parts, and appliances in artifacts has increased. These products use valuable rare metals such as platinum group metals and gold, which are included occasionally as additives. Rare metals are maldistributed in the world and most of them are produced in small quantities. A small amount of rare metals used in the appliances causes a large loss of rare metal resources because of the lack of an economically recycling method. The present recycling technologies including physical and chemical separation methods that are considered for recycling of electric, mechanical parts and appliances.

  • PDF

국내 희유금속 원재료 교역구조 변화 분석 연구 (Analysis of Changes in Trade Structure of the Raw Materials of Rare Metals in Korea)

  • 이화석;김유정
    • 자원리싸이클링
    • /
    • 제32권6호
    • /
    • pp.67-78
    • /
    • 2023
  • 첨단산업의 원재료로 사용되는 희유금속은 국내 산업구조변화와 기술변화에 따라 수요구조와 공급망이 변화하며, 가격 변동성이 높아 주기적으로 수요구조 변화분석을 시행하는 것이 필요하다. 국내에서는 대부분의 희유금속 수요를 수입에 의존하고 있어 교역구조 변화를 분석하는 것을 통해 국내 수요변화를 확인할 수 있다. 본 연구에서는 희유금속 35종을 대상으로 광석(정광), 금속, 합금, 화합물, 스크랩 등 5개 유형별로 2000년부터 2022년까지 교역규모, 교역증가율, 교역순위, 교역국가 등의 변화를 분석하였다. 우리나라 희유금속 원재료 교역은 '09년과 '16년의 큰 폭의 하락을 제외하고는 2000년대 이후 전반적으로 증가하는 추세로, 수출과 수입을 모두 포함하는 총교역규모는 '01년 대비 '22년 10배가량 증가하였다. 2010년대 중반까지는 규소, 니켈, 크롬, 몰리브덴, 망간 등 철강산업 원료 위주로 교역이 이루어졌으나 그 이후에는 팔라듐, 로듐, 백금 등의 백금족과 리튬, 코발트 등의 이차전지 원료의 교역이 증가하였다. 특히 '22년에는 리튬의 수요증가와 가격급등으로 인해 리튬이 가장 큰 교역 비중을 차지하였다.

Porous Materials Based on Nickel and Aluminum

  • Dubinina, L.V.;Lopatin, V.U.;Narva, V.K.;Shugaev, V.A.;Vin, Tein
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
    • /
    • pp.614-615
    • /
    • 2006
  • Investigation of influence the morphology of initial powder particles, application pore-formers for sintering of nickel powders and application of flux for sintering of aluminum was made. Using different methods was prepared material with size of porous in wide range size of pores ($1-500{\mu}m$). Using the flux for gravity sintering of aluminum in air atmosphere was manufactured porous material with porosity about 45%..

  • PDF

다이아몬드 배열 무전해 니켈 도금층/무산소동 기판의 열전도도 특성 (Thermal Properties of Diamond Aligned Electroless Ni Plating Layer/Oxygen Free Cu Substrates)

  • 정다운;김송이;박경태;서석준;김택수;김범성
    • 한국분말재료학회지
    • /
    • 제22권2호
    • /
    • pp.134-137
    • /
    • 2015
  • The monolayer engineering diamond particles are aligned on the oxygen free Cu plates with electroless Ni plating layer. The mean diamond particle sizes of 15, 23 and $50{\mu}m$ are used as thermal conductivity pathway for fabricating metal/carbon multi-layer composite material systems. Interconnected void structure of irregular shaped diamond particles allow dense electroless Ni plating layer on Cu plate and fixing them with 37-43% Ni thickness of their mean diameter. The thermal conductivity decrease with increasing measurement temperature up to $150^{\circ}C$ in all diamond size conditions. When the diamond particle size is increased from $15{\mu}m$ to $50{\mu}m$ (Max. 304 W/mK at room temperature) tended to increase thermal conductivity, because the volume fraction of diamond is increased inside plating layer.

Review on Evaluation of Rare Earth Metals and Rare Valuable Metals Contained in Coal Ash of Coal-fired Power Plants in Korea

  • Park, Seok-Un;Kim, Jae-Kwan;Seo, Yeon-Seok;Hong, Jun-Seok;Lee, Hyoung-Beom;Lee, Hyun-Dong
    • KEPCO Journal on Electric Power and Energy
    • /
    • 제1권1호
    • /
    • pp.121-125
    • /
    • 2015
  • Distribution of rare earth metals (REMs) and rare valuable metals (RVMs) contents in coal ashes (fly ash, bottom ash, and pond ash) and leachate from 11 coal-fired power plants in Korea were investigated. Coal ashes and leachates were found to contain important REMs and RVMs such as Yttrium (Y) and Neodymium (Nd), which was in the range of 23~75 mg/kg. However, it still requires developing effective recovery and separation methods in order to utilize REMs and RVMs in ash and leachate. Recovery of valuable elements (Y and Nd) from various and extensive ash sources (8.21 million tons/year in 2013) can provide the existing power plants with additional profit; therefore, it can significantly improve economics of the power plants.

Study on Reaction Behavior of Mg-FeB Phase for Rare Earth Elements Recovery from End-of-life Magnet

  • Sangmin Park;Dae-Kyeom Kim;Rongyu Liu;Jaeyun Jeong;Taek-Soo Kim;Myungsuk Song
    • 한국분말재료학회지
    • /
    • 제30권2호
    • /
    • pp.101-106
    • /
    • 2023
  • Liquid metal extraction (LME), a pyrometallurgical recycling method, is popular owing to its negligible environmental impact. LME mainly targets rare-earth permanent magnets having several rare-earth elements. Mg is used as a solvent metal for LME because of its selective and eminent reactivity with rare-earth elements in magnets. Several studies concerning the formation of Dy-Fe intermetallic compounds and their effects on LME using Mg exist. However, methods for reducing these compounds are unavailable. Fe reacts more strongly with B than with Dy; B addition can be a reducing method for Dy-Fe intermetallic compounds owing to the formation of Fe2B, which takes Fe from Dy-Fe intermetallic compounds. The FeB alloy is an adequate additive for the decomposition of Fe2B. To accomplish the former process, Mg must convey B to a permanent magnet during the decomposition of the FeB alloy. Here, the effect of Mg on the transfer of B from FeB to permanent magnet is observed through microstructural and phase analyses. Through microstructural and phase analysis, it is confirmed that FeB is converted to Fe2B upon B transfer, owing to Mg. Finally, the transfer effect of Mg is confirmed, and the possibility of reducing Dy-Fe intermetallic compounds during LME is suggested.

VECM모형을 이용한 국내 희유금속의 수요예측모형 (A Study on Demand Forecasting Model of Domestic Rare Metal Using VECM model)

  • 김홍민;정병희
    • 품질경영학회지
    • /
    • 제36권4호
    • /
    • pp.93-101
    • /
    • 2008
  • The rare metals, used for semiconductors, PDP-LCS and other specialized metal areas necessarily, has been playing a key role for the Korean economic development. Rare metals are influenced by exogenous variables, such as production quantity, price and supplied areas. Nowadays the supply base of rare metals is threatened by the sudden increase in price. For the stable supply of rare metals, a rational demand outlook is needed. In this study, focusing on the domestic demand for chromium, the uncertainty and probability materializing from demand and price is analyzed, further, a demand forecast model, which takes into account various exogenous variables, is suggested, differing from the previously static model. Also, through the OOS(out-of-sampling) method, comparing to the preexistence ARIMA model, ARMAX model, multiple regression analysis model and ECM(Error Correction Mode) model, we will verify the superiority of suggested model in this study.