• 보건행정학회지
• /
• 제21권2호
• /
• pp.213-248
• /
• 2011

Past studies on organizational accountability have had similar limitations. First, empirical evidence of organizational accountability is rare as the majority of research takes a conceptual approach of the topic. Only a few of these studies are applicable to health care organizations (HCOs). To fill these gaps, we attempted to develop a model for analysis of organizational accountability for HCOs. Accountability for HCOs was conceptualized by two axes: answerability(X, horizontal) and value-creation(Y, vertical). Our concept building could relieve competing accountability mechanism which past studies stressed. Four elements of accountability(legal, economical, social, and clinical) were applied to specify each of the two features of organizational accountability. And then four types of accountability behavior were coordinated by this x-y axis : high A/high VC, high A/low VC, low A/high VC, low A/low VC. Finally, a multidimensional model of HCOs' accountability, enabling an empirically testable multi-level analysis, was proposed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.796-805
• /
• 2008

Safety Management of Korean railway industry has been rapidly changed into a risk-based approach adopted by developed countries since Railway Safety Act 2004, Rolling Stock Risk Assessment Guidance and its following regulations came into force. The fundamental requirements for the risk-based safety management is to carry out a systematic hazard identification and quantified risk analyses including cost-benefit analyses, but there has been rare a serious discussion over risk acceptance criteria and value of life in order to be able to judge the results of risk analyses and carry out cost-benefit analyses. This study presents the results of a review of risk acceptance criteria and value of life which may be adoped to Korean railway industry through the analyses with comparison of risk accepatnce principles and risk accepatnce criteria which have been already applied to other countries or other railway operators.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.173-174
• /
• 2006

X-ray analysis on iron ores and reduced iron powders revealed that the main acid-insoluble substances were hexagonal and tetragonal quartz, another substances were sillimanite, alumina-silicate, an unnamed zeolite, all contained Si and Al. Their particle size was in the range of $3{\sim}7\;{\mu}m$. Statistics analysis showed that the AIC for high-grade magnetite powder was $(0.130{\pm}0.010)%$) during the latest five months. The predicting value for reduced iron powder should be 0.179%. However, the testing value for reduced iron powder was $(0.192{\pm}0.014)%$. The limited difference of 0.013% might imply rare pollution coming from the reduction and milling processes. The most important step for control AIC should be the separation process of iron ore powders.

• Advances in environmental research
• /
• 제5권1호
• /
• pp.1-18
• /
• 2016

Magnetic nano-based sorbents have been synthesized for the recovery of two rare earth elements (REE: Nd(III) and Yb(III)). The magnetic nano-based particles are synthesized by a one-pot hydrothermal procedure involving co-precipitation under thermal conditions of Fe(III) and Fe(II) salts in the presence of chitosan. The composite magnetic/chitosan material is crosslinked with epichlorohydrin and modified by grafting alanine and serine amine-acids. These materials are tested for the binding of Nd(III) (light REE) and Yb(III) (heavy REE) through the study of pH effect, sorption isotherms, uptake kinetics, metal desorption and sorbent recycling. Sorption isotherms are well fitted by the Langmuir equation: the maximum sorption capacities range between 9 and 18 mg REE $g^{-1}$ (at pH 5). The sorption mechanism is endothermic (positive value of ${\Delta}H^{\circ}$) and contributes to increase the randomness of the system (positive value of ${\Delta}S^{\circ}$). The fast uptake kinetics can be described by the pseudo-second order rate equation: the equilibrium is reached within 4 hours of contact. The sub-micron size of sorbent particles strongly reduces the contribution of resistance to intraparticle diffusion in the control of uptake kinetics. Metal desorption using acidified thiourea solutions allows maintaining sorption efficiency for at least four successive cycles with limited loss in sorption capacity.

• 공업화학
• /
• 제18권4호
• /
• pp.361-365
• /
• 2007

LiCl-KCl 공융염 내 존재하는 몇가지 희토류염화물($Ce/Nd/GdCl_3$)들의 산소와의 반응으로 인한 침전반응에 대한 연구를 수행하였다. 산소와의 반응으로 형성되는 희토류침전물의 형태와 산소분산 시간(최대 420 min) 및 공융염($450{\sim}750^{\circ}C$) 온도가 침전물로의 전환율에 미치는 영향을 규명하였다. 본 연구결과 산소분산 시간 및 공융염의 온도와 무관하게 $NdCl_3$ 및 $GdCl_3$는 옥시염화물(REOCl), $CeCl_3$는 산화물($REO_2$)형태로 침전되었으며 이러한 실험결과는 반응 Gibbs free energy (${\Delta}G_r$) 를 이용한 예측 결과와도 일치하였다. 희토류염화물의 침전물로의 전환특성은 전환율 개념을 도입하여 파악하였다. 전환율은 산소분산 시간이 증가함에 따라서 지수적으로 증가하였으며 $750^{\circ}C$의 공융염 온도 및 300 min 이상의 분산시간 조건에서 0.999 이상의 전환율을 나타내었다. 공융염 온도가 증가함에 따라서 전환율이 증가하였다. Ce의 경우에는 60 min 이상의 산소분산 조건에서 전 실험온도 범위에서 0.999 이상의 일정한 전환율을 나타내었다

• 암석학회지
• /
• 제28권2호
• /
• pp.129-141
• /
• 2019

옥천변성대의 북서부에 위치하는 충주 어래산 지역은 주로 신원생대 계명산층과 이를 관입하는 중생대 화성암류로 구성되어 있다. 계명산층의 변성산성암의 방사능 값은 매우 높게 나타나고, 전기 쥬라기 흑운모 화강암은 이 지역에 광범위하게 분포한다. 이 논문에서는 변성산성암을 중심으로 희토류 광물인 갈렴석의 성장과 관련된 미구조 연구를 수행하여 희토류 광화작용의 기원과 발생 시기를 고찰하였다. 변성산성암은 주로 알칼리장석(주로 미사장석), 석영, 철산화광물, 흑운모, 사장석, 각섬석, 갈렴석, 저어콘, 녹렴석, 형석, 인회석, 석류석, (사)유렴석 등으로 구성되어 있다. 갈렴석은 흑운모와의 접촉부에 방사선 손상에 의한 짙은 갈색 광륜을 형성시키기도 하고, 광역엽리를 따라 집합체로 산출되기도 한다. 대부분의 갈렴석(집합체)의 주변부에서는 광역엽리가 형성되기 이전에 이들이 성장하였음을 지시하는 변형그늘이나 광역엽리의 굴곡면은 관찰되지 않는다. 갈렴석 집합체에 포획된 철산화광물의 입자 크기와 방향성은 광역엽리를 따라 산출하는 기질부의 철산화광물과 동일하다. 후기 화성암의 관입에 의한 열수변질작용으로 각섬석의 흑운모화가 인지되고, 이차적으로 성장한 흑운모는 갈렴석, 저어콘, 녹렴석 등과 접촉 공생한다. 이러한 미구조로부터 희토류 광물인 갈렴석(집합체)은 주로 광역엽리가 형성된 이후에 화성암의 관입과 관련된 열수변질작용으로 성장하였으며, 충주 어래산 지역의 희토류 광화작용은 이 지역에 광범위하게 산출되는 전기 쥬라기 흑운모화강암의 관입과 밀접한 관련성이 있는 것으로 고찰된다.

• 자원리싸이클링
• /
• 제29권6호
• /
• pp.125-132
• /
• 2020

국내 순환유동층보일러형 발전소 석탄재의 주요 광물 및 희토류의 이동특성을 분석하여 석탄재 중 희토류 성분의 농축 가능성 검토를 위해 체 분리 및 침출을 통한 주요 광물의 분리 및 제거에 따른 희토류 성분의 이동특성을 평가하였다. 석탄재의 주요 광물로는 경석고, 자철석 및 석영으로 확인되었으며, 세계 석탄재 희토류 평균값(404 ppm)의 30% 수준 함량으로 확인되었다(실험대상: 123 ppm). 석탄재에 포함된 희토류 성분 중 90% 이상은 주로 자철석과 함께 이동하는 특성을 보였고, 10% 이하의 성분이 석영과 함께 이동하는 것으로 확인되었다. 이는 발전소 연소 방식 차이에 따라 발생된 석탄재 특성에 따른 영향으로 판단된다. 이에 국내 순환유동층보일러 석탄재로부터 희토류 성분 농축을 위해서는 자철석 분리가 필요하며, 이와 관련된 선별 기술 개발 및 확보가 요구된다고 판단된다.

• Current Optics and Photonics
• /
• 제8권3호
• /
• pp.230-238
• /
• 2024

The refractive index is a key material-design parameter, especially for high-refractive-index glasses, which are used for precision optics and devices. Increased demand for high-precision optical lenses produced by the glass-mold-press (GMP) process has spurred extensive studies of proper glass materials. B₂O₃, SiO₂, and multiple heavy-metal oxides such as Ta₂O₅, Nb₂O₅, La₂O₃, and Gd₂O₃ mostly compose the high-refractive-index glasses for GMP. However, due to many oxides including up to 10 components, it is hard to predict the refractivity solely from the composition of the glass. In this study, the refractive index of optical glasses based on the B₂O₃-La₂O₃-Ta₂O₅-SiO₂ system is predicted using machine learning (ML) and compared to experimental data. A dataset comprising up to 271 glasses with 10 components is collected and used for training. Various ML algorithms (linear-regression, Bayesian-ridge-regression, nearest-neighbor, and random-forest models) are employed to train the data. Along with composition, the polarizability and density of the glasses are also considered independent parameters to predict the refractive index. After obtaining the best-fitting model by R² value, the trained model is examined alongside the experimentally obtained refractive indices of B₂O₃-La₂O₃-Ta₂O₅-SiO₂ quaternary glasses.

• 대한방사선기술학회지:방사선기술과학
• /
• 제42권2호
• /
• pp.113-117
• /
• 2019

The purpose of this study was to investigate the FA value which can produce the best T2-weighted images by measuring the signal intensity and noise according to the FA value change in the brain image and the abdominal image of the mouse using micro-MRI. Brain imaging and abdominal imaging of BALB / C mice weighing 20g were performed using 4.7T (Bruker BioSpin MRI GmbH) micro-MRI equipment, Turbo RARE-T2 (spin echo-T2) images were scanned at TR 3500 msec and TE 36 msec. The changes of the FA values were $60^{\circ}$, $80^{\circ}$, $100^{\circ}$, $120^{\circ}$, $140^{\circ}$, $160^{\circ}$ and $180^{\circ}$. We measured signal intensity according to FA values of ventricle and thalamus in brain imaging, The signal intensity of kidney and muscle around the kidney was measured in abdominal images. To obtain SNR and CNR, we measured the background signals of two different parts, not the tissue. In the brain (thalamus) image, the signal intensity of FA $100^{\circ}$ was 7,433 and SNR (6.49) was the highest. In the abdominal (kidney) image, the signal intensity was highest at 16,523 when FA was $120^{\circ}$, and the highest SNR was 8.54 when FA was $140^{\circ}$. The CNR value of the brain image was 1.38 at FA $60^{\circ}$ and gradually increased to 8.29 at FA $180^{\circ}$. The CNR value of the muscle adjacent to the kidney gradually increased from 2.36 when the FA value was $60^{\circ}$ and the highest value was 4,57 at the FA value $180^{\circ}$.

• 한국재료학회지
• /
• 제26권8호
• /
• pp.444-448
• /
• 2016

In this study, the recently developed Al 2013 alloy was T8-tempered and, to improve the strength and corrosion-resistance, slight amounts of Zr of 0.2 wt% and 0.5 wt%, respectively, were added and the mechanical properties were analyzed. For microstructure and precipitate analysis, OM observation, XRD analysis, and TEM analysis were performed, and for the mechanical property analysis, hardness and tensile strength tests were done. Also, in order to determine the corrosion rate according to the Zr content, a potentiodynamic polarization test was performed and the properties were compared and analyzed. The size of the precipitate varied with the content of Zr and was finest at Zr content of 0.2 wt%; it grew larger at 0.5 wt%, at which point the hardness value accordingly showed the same trend. On the other hand, as calculated from the aspect of chemical bonding among atoms, it was confirmed that the tensile strength and the corrosion-resistance increased with the same trend.