• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.794-799
• /
• 2005

In this paper, the inductive power collector using electromagnetic induction for the PRT(Personal Rapid Transit) system is suggested and some ideas for power collector design to improve the power transfer performance are presented. The proposed the inductive power collector is used for the PRT system, which has a large air-gap and demands a large electrical power capability. But, low output power is generated due to a loosely coupled characteristic of the large air-gap. Therefore, double layer construction of secondary winding. which was divided in half to increase both output current and output voltage was suggested. Also, model of power collector and parallel winding structure are presented, in addition, the performance of inductive power collector to alignment condition between the primary power line and the inductive power transformer was verified by computer simulation of 2kW model.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.2023-2029
• /
• 2009

The PRT can be divided into In-Track and On-Board according to propulsion method. In process of In-Track, vehicles driven by LIMs(Linear Induction Motor) which are installed in Guideway. Central Controller, which control whole machine, must control speed and direction of all vehicles. In this case, as vehicle increases, Central Controller will overload. If Central Controller fails, all vehicle stops. To avoid this problem, processing of Central Controller must be distributed. This paper introduces method of Distributed Routing. Method of Distributed Routing will provide safety and efficiency for PRT System.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1407-1415
• /
• 2008

Recently, there has been growing interest in Gyongin Line demand estimation, because SMRT(Seoul Metropolitan Rapid Transit Corporation) Line 7 will be extended west by 9.8km from Onsu to meet the Gyongin Line at Bupyeong-gu Office. This study was designed to estimate the change of traffic demand in Gyongin Line before and after the completion year 2011, also provide against the economic loss caused by the derived demand from Gyongin Line to SMRT Line 7. In this paper we give preliminary results for the strategic plans for traffic demand estimation and train operating plan in Gyongin Line by analyzing transport performance of Seoul metropolitan subway, and an additional study on the transportation market and the urban development plan is needed for more accurate results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.215-217
• /
• 2005

In this paper, the inductive power collector using electromagnetic induction for the PRT{Personal Rapid Transit) system is suggested and some ideas for power collector design to improve the power transfer performance are presented. The proposed the inductive power collector is used for the PRT system, which has a large air-gap and demands a large electrical power capability. But, low output power is generated due to a loosely coupled characteristic of the large air-gap. Therefore, double layer construction of secondary winding, which was divided in half to increase both output current and output voltage was suggested. Also, model of power collector and parallel winding structure are presented, in addition, the performance of inductive power collector to alignment condition between the primary power line and the inductive power transformer was verified by computer simulation of 2kW model.

• 전기학회논문지
• /
• 제61권9호
• /
• pp.1368-1373
• /
• 2012

In this paper, we propose an efficient driving pattern which consumes less energy for driving from one station to next. Three driving patterns for four sections in the No. 5 subway line of Seoul Metropolitan Rapid Transit Corp. are compared for the energy consumption, the maximum speed, and the powering time. It turns out that the powering time and the maximum speed should be decreased as much as possible in order to achieve the efficient driving.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.350-353
• /
• 1998

In this paper, a wayside signaling emulator systems developed for testing to carbone ATC/ATO/TWC systems adopted in SMRT(Seoul Metropolitan Rapid Transit Coperation) line 7, 8 is presented. Informations that are required to train movement with driverless, such as stations status, destination station, restriction speed and train modes are provided through the wayside signaling emulator. The developed emulator systems can be constructed to 1.5km testing tracks and the end points of track, are emulated to the arbitrary stations in SMRT line 7, 8.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.255-261
• /
• 1998

The train automatic operation control system is an on-board train control system that is widely adopted in modern rapid transit systems. The control system consists of TCMS(Train Control and Monitoring System), ATC(Automatic Train Control), ATO(Automatic Train Operation) and TWC(Train to wayside communication) in the train and wayside facilities. The functions of the system is to regulate train riding comfort, to service limited speed and smoothness during start, acceleration, constant speed travel, and fixed point parking under the corresponding commands. The paper describes the simulation model of the train automatic operation control of subway system, configuration of simulator hardware and software and operational algorithms.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.679-686
• /
• 2008

There has been an increasing demand of introducing innovative public transport modes meriting high flexibilities of a bus mode along with on-time accuracy and quality environment-friendliness of a rail mode, as it is considered to significantly contribute to reducing huge social expenditures on the traffic congestion and environmental pollution agenda, and to be an alternative solution to better the urban transport problems. In order to comply with the need, Seoul Municipal Government has recently decided to build up GRT system of a new concept in Nangok area in Seoul, the first in its kind in Korea. The concession has been awarded to Seoul Metro. This thesis will study and benchmark similar systems abroad under operation, and further review necessary requirements overall which would secure full readiness for the operation of Nangok GRT system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.347-351
• /
• 2008

This study is concerned with the design of the communication based evaluation simulator for the development of the operational control algorithm for PRT(Personal Rapid Transit) system which has very short headway and requires accurate speed control of the vehicles to avoid the impact between the vehicles. The evaluation simulator is composed of central control system, vehicle control system, communication control system, AP for wireless communication, and monitoring system. For the mobile characteristics of the PRT vehicles wireless communication is employed for the transmission of the control and status information between the central control system and the vehicle control system. By using simple test operational control algorithm the effectiveness of the proposed evaluation simulator is shown.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.297-302
• /
• 2011

Railway construction in the random vibration natural phenomena, as well as a relatively regular train loads for dynamic loads, such as a usability and safety should be ensured. Vibration due to train loads and seismic vibrations caused by wind compared to the typically very small in size, rather than the safety of the structure affects the usability. Recently in the downtown area, ground and underground facilities, such as a permanent facility that may cause excessive vibration increases, associated with the construction of these transportation facilities on ground vibrations of structures has been increasing concern and complaint. More recently, high-speed train vibration and noise due to furnace is increasing. In order to solve this problem, such as soundproof considering several feet, but by applying the vibration and noise reduction measures insufficient for the study is Free. In this study, track structure, track, and the inside of the building to support the system, the different forms of neurological history and share about the history cheonanahsan high-speed rail, if passed by the bus stop on the train loads of noise, and the history of interior noise and vibration measurement / analysis of measurement results to assess the relative comparison with the relevant provisions were reviewed. Based on this history, future plans for the design of the bridge to reflect the results of a study is intended to provide information. Waiting for the analysis of vibration and noise reduction, cheonanahsan history passed quietly in the train, on average, appeared to 67.53dB and 65.41dB nervous week on average, were measured with the history. Nervous week waiting room of history and the history cheonanahsan radically different shapes and sizes, so a direct comparison is impossible, but the vibration caused by the disc on the base of the polyurethane elastomer disk is not supported by GERB SYSTEM Waiting more effective in reducing the noise level considered in The main materials for railway and for the localization will help to ensure affordability is considered.