• 한국인쇄학회지
• /
• 제29권2호
• /
• pp.1-13
• /
• 2011

The recent spotlight on electronic touch-screen display, a rapid breakthrough in the information society is evolving. Touch panel input device such as a keyboard or mouse without the use of, the on-screen character or a specific location or object on the person's hand touches a particular feature to identify the location of a panel is to be handled. The touch screen on the touch panel is used in the Ag paste is used mostly for low-curable paste. The thermal-curing paste according to the drying process of thermal energy consumption and improve the working environment of organic solvents have problems. In this study, Ag paste used in the non-thermal curing friendly and cost-effective UV curable paste was prepared. Current commercially available thermal-curable binder, was used instead of the flow characteristics of UV-curable oligomers and monomers with functional groups to give a single conductive Ag paste with the addition of a pattern could be formed. Ag paste as a result, thermal-curing adhesive, hardness, resistance and excellent reproduction of fine patterns and was available with screen printing environmentally friendly could see its potential as a patterning technology.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.131-132
• /
• 2022

Looking at recent construction cases at winter construction sites, there is a risk that heat sources such as kerosene fans and fossil fuels (brown coal, molded carbon) used in concrete will cure rapidly, so in situations where further curing is impossible after formwork removal, the outer wall and the entire slab are exposed to rapid external deterioration, resulting in delays in concrete strength expression and until collapse accidents. In this study, we applied kerosene fans and tropical circulating electric heat fans mainly used as curing heat sources at construction sites, comparative analysis. also verified the performance of structures during concrete curing due to thermal convention / circulation performance, concrete demand strength expression, and implementation of electric heat fans by heavy disaster methods.

• Restorative Dentistry and Endodontics
• /
• 제25권1호
• /
• pp.91-108
• /
• 2000

Most of cervical abrasion and erosion lesions show gingival margin where the cavosurface angle is on cementum or dentin. Composite resin restoration of cervical lesion shrink toward enamel margin due to polymerization contraction. This shrinkage has clinical problem such as microleakage and secondary caries. Several methods to diminish contraction stress of composite resin restoration, such as modifying cavity form and building up restorations in several increments have been attempted. The purpose of this study was to compare polymerization contraction stress of composite resin in Class V cavity subjected to cavity forms and placement methods. In this study, finite element model of 5 types of Class V cavity was developed on computer tomogram of maxillary central incisor. The types are : 1) Box cavity 2) Box cavity with incisal bevel 3) V shape cavity 4) V shape cavity with incisal bevel 5) Saucer shape cavity. The placement methods are 1) Incisal first oblique incremental curing 2) Bulk curing. An FEM based program for light activated polymerization is not available. For simulation of curing dynamics, time dependent transient thermal conduction analysis was conducted on each cavity and each placement method. For simulation of polymerization shrinkage, thermal stress analysis was performed with each cavity and each placement method. The time-temperature dependent volume shrinkage rate, elastic modulus, and Poisson's ratio were determined in thermal conduction data. The results were as follows : 1. With all five Class V cavifies, the highest Von Mises stress at the composite-tooth interface occurred at gingival margin. 2. With box cavity, V shape cavity and saucer cavity, Von Mises stress at gingival margin of V shape cavity was lower than the others. And that of box cavity was lower than that of saucer cavity. 3. Preparing bevel at incisal cavosurface margin decreased the rate of stress development in early polymerization stage. 4. Preparing bevel at incisal cavosurface margin of V shape cavity increased the Von Mises stress at gingival margin, but decreased at incisal margin. 5. At incisal margin, stress development by bulk curing method was rapid at early stage. Stress development by first increment of incremental curing method was also rapid but lower than that by bulk curing method, however after second increment curing final stress was the same for two placement methods. 6. At gingival margin, stress development by incremental curing method was suddenly rapid at early stage of second increment curing, but final stress was the same for two placement methods.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.548-551
• /
• 1999

The cure characteristics of metal particle filled DGEBA/MDA/SN/ zeolite epoxy resin composite system for EMI shielding were investigated by dynamic DSC run method and FT-lR spectroscopy. As the heating rate increased, the peak temperature on dynamic DSC curve increased because of the rapid cure reaction. From the straight line of the Kissinger plot, the curing reaction activation energy and pre-exponential factor could be obtained. As the post-curing time at 15$0^{\circ}C$ increased, the glass increased the glass transition temperature or the thermal stability increased. When the post curing time is too long, the system filled with metallic Al particle can be thermally oxidized by the catalytic reaction of metal filler and the thermal stability of the composite for the EMI shielding application may be decreased.

• 한국산업융합학회 논문집
• /
• 제2권1호
• /
• pp.69-75
• /
• 1999

Intending to develop a new rubber curing process using only microwave, the both the characteristics of cure and the mechanical properties of rubbers for the tire tread, for which a green styrene-butadiene compounds had been cured with 2.45 GHz microwave, have been compared with those of the custom thermal cured rubber. The unintentional hot spot formation in the compound during the microwave curing has not found where the compound has a microwave absorbing ceramic powders in 4.18 weight percents and the supplying voltage has been adjusted to 90 volts. The new microwave process accomplished preheating to 418K in a quarter of the thermal cure time. The average tensile strength of the microwave-cured rubber indicating $190kg/cm^3$ was compatible to that of the thermal cure. In conclusion, the new microwave cure had approved to be applicable in a commercial plant.

• 보존과학회지
• /
• 제33권6호
• /
• pp.467-483
• /
• 2017

본 연구에서는 문화재 복원용 속(速)경화형 Epoxy계 수지인 $Araldite^{(R)}$ rapid의 온도 스트레스에 의한 열화 특성을 분석하였다. 인장강도 및 접착강도는 $40{\sim}60^{\circ}C$에서 12,624시간까지 감소하여 내구성 및 접착특성의 미약한 열화가 발생하였다. 외부 응력 및 온도에 대한 안정성은 속(速)경화형에 비해 일반 경화형 Epoxy계 수지가 우수하여, 복원부의 강도 특성 및 응력 상태를 고려한 복원재료의 적절한 선택과 적용이 요구된다. $40{\sim}60^{\circ}C$에서 12,624시간까지 색차의 증가와 광택도의 감소 등 색상 및 광택 안정성은 취약하여, 향후 광학특성의 개선을 위한 안정성 향상 연구가 필요하다. 특히 접착제의 열적 특성(중량감소량, 열분해온도, 유리전이온도)은 기계적 물성 변화에 부분적으로 관여하였고, 피착재의 계면 특성 및 접착제의 기체투과특성(수분투과도)은 접착성능의 중요인자로 작용하였다. 따라서 도자기, 벽돌 및 석재와 같은 다공성 재질의 경우 항온항습에 의한 보존환경 관리가 중요하며, 옥외 전시유물의 경우 노출환경에 의한 물성 변화를 최소화할 수 있는 보존대책의 수립이 절실하다. 향후 이러한 결과는 문화재에 사용된 Epoxy계 수지의 열화속도 및 수명예측 자료로 활용될 것으로 기대된다.

• 접착 및 계면
• /
• 제19권2호
• /
• pp.74-82
• /
• 2018

아크릴레이트 기반의 점착제를 가교 시키는 기술은 다양하게 소개되어 왔다. 본 연구에서는 에폭시 변성 단량체와 메틸아지리딘 가교제를 활용하여 높은 가교 밀도를 가지는 아크릴 구조체를 만들었다. 베이스구조체를 제조하기 위해서 빠른 제조 공정이 가능하고 무용제 공정이 가능한 UV 중합 기술을 활용했다. FT-IR, 경화거동 및 접착특성 평가를 통해 UV경화도 및 2차경화 온도에 따른 특성 변화를 확인하고자 하였다. 겔분율은 선경화 $800mJ/cm^2$, 120도 후 경화온도 조건에서 50%이상 확보할 수 있었으며, 180도 경화조건에서 80%이상 확보 할 수 있었다. 경화 시간이 길어짐에 따라 경화도가 100%에 도달하였으며 이를 통해 열경화를 통한 2차 경화가 효과적임을 확인 할 수 있었다.

• 한국건설순환자원학회논문집
• /
• 제8권4호
• /
• pp.421-428
• /
• 2020

겨울철 도로는 내부 수분의 빙결현상으로 인한 블랙아이스가 발생하여 많은 피해를 유발한다. 최근에는 다양한 기능을 가진 Multi-walled carbon nanotube(MWCNT)와 콘크리트를 복합하여 열적 및 전기적 성능이 우수한 건설 재료에 대한 연구가 진행되고 있다. 이러한 나노-콘크리트 복합재료를 활용하여 시공한 구조물은 표면에 결함이 발생하여 일반적인 보강재를 사용할 경우 열적 및 전기적 성능이 현저하게 저하된다. 본 연구는 표면에 결함이 발생한 콘크리트 구조물을 단시간 내에 보강할 수 있는 초속경 나노-시멘트 복합체의 발열성능과 소비전력을 분석하고자 한다. 실험은 초속경 시멘트계 재료, 양생일, 공급전압을 매개변수로 설정한 뒤 수행하였다. 초속경 시멘트계 재료는 시멘트 페이스트, 모르타르, 콘크리트로 구분하였다. 실험결과, 양생일이 1일인 경우에는 전압을 20V 공급할 시 모든 초속경 나노-시멘트 복합체에서 10℃ 이상의 발열성능이 확인되었다. 양생일이 28일인 경우에는 1일에 비하여 동일 전압에서의 발열성능이 소폭 감소하였으나, 전압을 30V까지 공급하여도 안정적으로 발열성능이 유지되는 것으로 분석되었다. 결과적으로 초속경 나노-시멘트 복합체는 콘크리트 구조물 표면 결함을 보강한 후 단시간 내에 발열성능을 발현할 수 있고, 일정시간이 지나도 발열성능이 유지되는 것으로 판단된다.

• 대한건축학회논문집:구조계
• /
• 제35권5호
• /
• pp.153-160
• /
• 2019

The purpose of this study was to investigate the mechanical and durability characteristics of latex-modified concrete using ultra rapid hardening cement : four types of mechanical tests including compressive strength, modulus of elasticity, flexural strength and bond strength were performed; and seven types of durability tests including resistance of concrete to chloride ion penetration, freeze-thaw resistance, scaling resistance, coefficient of thermal expansion, cracking tendency, abrasion resistance and drying shrinkage were performed. Required material performance of each test was determined in accordance with the Korea specification for repair of concrete and pavement repairing materials. The test results satisfied the required material performances, and presented a good mechanical and durability characteristics. In particularly, the materials showed early development of compressive strength, flexural strength and bond strength at 3 and 4 hours after curing. SEM photos were also taken to investigate the micro structures of the materials after chloride ion penetration test.

• 공업화학
• /
• 제26권5호
• /
• pp.538-542
• /
• 2015

본 연구에서는 epoxy (Diglycidylether of bisphenol-A, DGEBA)에 대한 nylon 6의 혼합비가 각각 0, 10, 20, 30, 40 wt%로 블랜딩한 혼합 수지를 시차 주사 열량계(DSC)와 열 중량 분석(TGA)을 사용하여 경화 동력학 및 열안정성에 관하여 연구하였다. 실험 결과, nylon 6의 함량이 증가함에 따라 최대 발열 온도($T_{max}$)가 낮아지며, 경화 활성화 에너지($E_a$) 값은 감소하였다. 이는, nylon 6의 함량이 증가함에 따라 DGEBA와 결합이 빠르게 이루어져 최대 발열 온도에 영향을 미친다고 판단된다. DGEBA/nylon 6의 TGA 분석 결과 nylon 6의 함량이 증가할수록 열안정지수($A^*{\cdot}K^*$) 및 적분 열분해 진행 온도(IPDT)에 입각한 열안정성이 증가하였다. 이러한 결과는 내열성이 우수한 nylon 6가 DGEBA와 결합하여 DGEBA/nylon 6 내부에 유입되는 열을 흡수하고, 열전달 및 확산을 제어하여 열안정성 인자들의 값이 증가되는 것으로 판단된다.