• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.2
• /
• pp.202-209
• /
• 2005

A new effective thick-layered RP process, Transfer-type Variable Lamination Manufacturing using expandable polystyrene foam (VLM-ST) has been developed with thick layers and sloped surfaces. VLM-ST has the innate advantages by virtue of its working principle: high building speed, low cost for introduction and maintenance of VLM-ST apparatus, little staircase surface irregularities of parts. Despite these advantages in VLM-ST, the surface roughness of VLM-ST parts is still inadequate to be used as RP master patterns for rapid tooling (RT). This paper describes the systematic and effective methodology to remove the laminated pattern and improve the surface roughness for VLM-ST parts. From the results of surface finishing of VLM-ST parts, it can be seen that the laminated pattern is completely removed and the surface characteristics such as surface roughness, surface hardness, and paintability are improved.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.659-662
• /
• 2002

SL(Stereolithography) part is made by piling up thin layers which causes the stair stepping effect at the surface of SL parts. This effect brings about excessive surface roughness and requires additional post-process finishing such as abrasive techniques that are detrimental to part geometry and time consuming. Hence a wax coating and grinding post-process is proposed to improve the surface quality of SL part. The wax that has suitable properties for the proposed post-process is coated all over the part surface. By grinding the thin layer of coated on the SL part only, the surface roughness can be improved without any damage on the part. From the experimental results, This approach is considered to be very practical fur die casting with RT(Rapid Tooling) techniques.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.9
• /
• pp.196-203
• /
• 2004

SL(Stereolithography) part is made by piling up thin layers which causes the stair stepping effect at the surface of SL parts. The effect brings about excessive surface roughness and cuts down the merits of using SL part. Hence, additional post-machining finishing such as traditional grinding is required. But the traditional post-machining is detrimental to part geometry and time consuming. In this study, therefore, a paraffin coating and grinding post-machining is newly proposed to improve the surface quality of SL fart. The paraffin which has suitable properties for the proposed post-machining is coated all over the part surface. By grinding the only over-coated paraffin based on boundary of the SL part surface, the surface roughness can be improved without any damage on the part. Also, it is verified that SL part finished by the proposed post-machining process can be applied for rapid tooling as pattern through manufacturing silicon rubber molding and casting test.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.62-67
• /
• 1999

The RP&M(Rapid Prototyping and Manufacturing) is the most appropriate technology for the small-lot production system, in which the production cycle is getting shorter owing to various needs from consumers. Recently RP products which are made of plastics, wax, and paper are used to verify the design of samples. But these products cannot be applied to the real mold because the strength enough to be a mold cannot be given by soft materials such as plastics. So RP products are copied to AFR(Al powder Filled Resin) molds or metal molds, which is called the RP&M. In this paper, RP&M is applied to a casting process. A porous casting mold, which is made from ceramic powder and binder, is used for rapid tooling of aluminum shoes molds.

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.3
• /
• pp.180-189
• /
• 1999

Solid freeform fabrication technology, widely known as rapid prototyping an rapid tooling, can create physical part directly from digital model by accumulating layers of a given material. Providing a tremendous flexibility of a part geometry that they can fabricate, these technologies present a opportunity or the creation of new products that can not be made with existing technologies. For this to be possible, however, various design environments including different fabrication processes needs to be considered at the time of design, and finding an appropriate design solution for the new product by combining necessary design communications become increasingly complex as environmental condition become diverse. This paper proposes a geometric modeling paradigm for design and fabrication of a new product, honeycomb structural geometry.

• International Journal of CAD/CAM
• /
• v.1 no.1
• /
• pp.1-9
• /
• 2002

The STL or Stereolithography format, established by 3D systems, gathers the geometric data of the model in a number of triangular surfaces. It can be in ASCII or binary format, and is a de facto standard in the Rapid Prototyping (RP) world. RP has developed greatly over the last ten years. In particular, improvement in materials has meant greater part accuracy and strength, which in turn has increased the range of functional applications. Future applications of RP will focus on rapid tooling and direct manufacturing. Direct manufacturing in particular may see much benefit from the incorporation of color into models. For color RP, besides designing new hardware to add color into the prototypes, it is necessary to redefine the CAD software for adding and accurately positioning color onto the model. STL cannot effectively store this kind of information. Among the existing data file formats, VRML is an acceptable one that is complimentary to existing RP processes. This paper acts as a review to discuss several methods of using VRML for coloring model data. This paper will also discuss the problems occurred in coloring the layer contours of the RP model.

• CDE review
• /
• v.3 no.2
• /
• pp.76-79
• /
• 1997

최근 몇년간 CAD/CAM 분야에서 활동하시는 많은 분들이 'RP'라는 신기술의 등장과 발전과정을 다분히 생경스러운 심정으로 지켜봐 왔을 것으로 생각된다. 주지하다시피 'RP 즉 Rapid Prototyping'은 '컴퓨터에 저장된 3차원 형상모델의 기하학적 자료로부터 그 물리적인 모형형상을 신속하게 조형해 내는 것'으로 주어진 설계 제품의 수학적 모델을 그 이전에 존재하였던 그 어떤 가공방식과도 비교할 수 없는 빠른 시간안에(통상 24시간 이내) 물리적인 모형으로 재현해 낸다는 것이 그 대표적인 장점이라고 하겠다. 우리말로는 '신속조형기술'이라고 명명할 수 있는 이 기술은 설계된 제품 형상의 기하학적인 복잡성이나 반복성에 전혀 구애받지 않고 그 어떤 제품형상도 조형이 가능하다. 물론 초기에 이 기계장치의 발명목적은 'RP'라는 용어가 시사하듯이 컴퓨터나 수작업에 의해 설계된 제품형상을 신속하게 관능(시각 및 촉각) 감각을 통해서 관찰하고 그에 따른 형상설계의 내용을 검증하기 위함이었다. 그러나 이 기술이 최근 그 발전의 행보를 빨리함에 따라 기존에는 상상할 수도 없었던 복잡한 제품 형상의 신속한 모형제작은 물론 가까운 장래에는 이의 주물성형을 위한 주형의 제작이나 플라스틱 사출성형용 금형제작(신속 주형/금형 제작-RT: Rapid Tooling 이라고 호칭)까지도 신속하게 수행해낼 것으로 기대된다.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.3
• /
• pp.88-94
• /
• 2002

Recently, the life cycle and the lead-time of a product are to be shortened in order to satisfy consumer's demand. It is thus important to reduce the time and cost in manufacturing trial products. Several technique have been developed and successfully commercialized in the market of RPM(Rapid Prototyping and Manufacturing). However, most commercial systems currently use resins or waxes as the raw materials. So, the limited mechanical strength for functional testing is regarded as an obstacle towards broader application of rapid prototyping techniques. To overcome these problems, high-speed machining technology is being investigated worldwide for rapid manufacturing and even for direct rapid tooling application. In this paper, some fundamental experiments and analyses are carried out to obtain the filling time, materials, method, and process parameters for HisRP(High-Speed RP) process. HisRP is a new RP process that is combined high-speed machining with automatic filling. In filling process, Bi58-Sn alloy is chosen as filling material because of the properties of low-melting point, low coefficient of thermal expansion and no harm to environment. Also the use of filling wire it if advantage since it needs simple and flexible mechanism. Then the rapid product, for example a skull, is manufactured for aluminum material by HisRP process with an automatic set-up device thor 4-faces machining.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.28-31
• /
• 2001

Recently, in order to satisfy the consumer's demand the life cycle and the lead-time of a product is to be shortened. It is thus important to reduce the time and cost in manufacturing trial products. Several techniques have been developed and successfully commercialized in the market RPM(Rapid Prototyping and Manufacturing). However, most commercial systems currently use resins or waxes as the raw materials. So, the limited mechanical strength for functional testing is regarded as an obstacle towards broader application of rapid prototyping techniques. To overcome this problems, high-speed machining technology is being investigated worldwide for rapid manufacturing and even for direct rapid tooling application. In this paper, some fundamental experiments and analyses are carried out to obtain the filling time, materials, method, and process parameters for HisRP process. HisRP is a combination process using high-speed machining technology with automatic filling. In filling process, Bi58-Sn alloy is chosen because of the properties of los-melting point, low coefficient of thermal expansion and enviromental friendship. Also the use of filling wire is of advantage in term of simple and flexible mechanism. Then the rapid manufacturing product, for example a skull, is machined for aluminum material by HisRP process with an automatic set-up device of 4-faces machining.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.303-306
• /
• 2001

To shorten the delivery time for new products, a lot of prototype plastic parts manufacturing technologies have been developed including injection molding, vacuum casting, thermal forming and so on. Among them, RIM is becoming one of a important soft tooling methods to produce prototype and mass production parts within short time. Further more, as the rapid prototyping technology based tooling methods are playing an important role in prototype manufacturing industry, the utility of the RIM is increasing. But few analyses and mold design techniques have been developed so far due to its chemical and mechanical complexity during the packing and curing process. This research suggests mold gate design criteria to prevent bobbles from molded parts through simplified mathematical model and change of bubble sizes according to the geometry of the molded parts through experiments. Also this study shows the differences of bobble generation mechanism between RIM and injection molding.