• Journal of Technology Innovation
• /
• v.16 no.2
• /
• pp.65-94
• /
• 2008

There has been rapid diffusion of digital innovation technology(DIT) such as 3 D CAD, CAE, simulation software which enable firms to see the future results of intended product designs through 3 D diagram and simulated results. This technology helps firms to reduce trial and error process by solving later stage problems in earlier stages. The DIT being the technology reflecting the real world, as a tool representing the simplified form of the real world, the degree of reflecting the real world(fidelity) is important in utilizing the DIT. This study is an exploratory research examining the process of reviewing the fidelity of the DITs and developing the complementary process necessary for utilizing the DIT with 'not good enough' fidelity. This study could draw out, from its case study, an exploratory hypothesis about the process of developing the complementary process. In the process, there is an analysis of the corresponding relationship between the actual data and the output data of the DIT, e.g. simulated result. Then the input data or output data are adjusted on the basis of the analysis of the corresponding relationship so that the discrepancy between the actual data and the expected interpretation of the output data, through the adjustment, of the DIT, can be reduced. This process is sometimes accompanied by the process of generating experimental data, which reflect the unique situation of the product development process of a company, to be put to the data base of DIT. The complementary process is the process requiring knowledge sharing and adjustment activities across different divisions. This study draw outs implications for effective management of the fidelity of DIT tools.

• Archives of design research
• /
• v.14
• /
• pp.87-106
• /
• 1996

Recent rapid development of electronic technologies and semiconductors has made it possible to perform diverse intelligent functions even in simple products. This technological sophistication, in turn, made it difficult to get required information on the usage of products by just its shape. Under these new circumstances, User-interface design became more important. However existing studies were mainly done with the emphasis of software development and focusing on the evaluation-stage after development of alternatives. This study sets the objective for developing modeling technique which can be applied to product design and the stage of concept development. At first the role of modeling was discussed to understand the nature of modeling. Then the existing techniques of modeling were reviewed for identifying advantages and limits. The review of existing modeling techniques revealed general objectives which new modeling techniques should fulfill. Based on objectives new modeling techniques were proposed. Following this new techniques, actual case of modeling a existing product were demonstrated to evaluate the validity of new technique and show the actual application. Finally findings were summarized and the limits of the study were identified.

• Journal of Technology Innovation
• /
• v.23 no.4
• /
• pp.205-244
• /
• 2015

In response to the recent rapid technological and market changes, the importance of the design of ambidextrous organization has been increasingly emphasized as one of the dynamic capabilities. Firms that show a high performance in the rapid technological and market changes appear to design and implement ambidextrous organization successfully. They have achieved both exploitative competence for continuous innovation with product development and exploratory competence for discontinuous innovation with new market and new technologies. We have examined why and how to design and operate ambidextrous organizations and the effects of ambidextrous organizational characteristics on the performance from structural, contextual and leadership perspectives. We conducted case studies on 3 Korean firms that showed different characteristics of industrial product, company size, etc. Longitudinal case studies exhibit different processes of design and operating ambidextrous organization according to innovative strategy and industrial characteristics.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.12
• /
• pp.142-150
• /
• 1996

Nowadays, as the development paeiod of new products becomes even shorter, the importance of Rapid Prototyping Technology(RPT) has been rapidly increased. The major application of RPT is an early verification of product designs and quick production of prototypes for testing. Moreover, RPT is applied not only as a second tooling process such as mold making and investment casting but also as a creating some physical structure in medical field. Despite the remarkable progress of RPT, it is required to improve various problems resulting from application such as production time, accuracy and materials. This paper presents a laser scan path generation for accuracy of stereolithographicparts The methodology of laser scan path generation is discussed based on the stereolithography, The procedure of this research is as follows : 1) Input laser scanning conditions such as a laser beam diameter and a laser scanning interval, 2) Reconstruct original contours without self intersecting offset, 3) Calculate offset about reconstructed contours, 4) Calculate intersection points between horizontal or vertical lines and offset contours for internal hatch, 5) Decide laser shutter on/off points. The algorithm developed and programmed by C language is verified as an efficient method after testing a number of STL files of mechanical parts.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.666-669
• /
• 2003

Recently, telecommunications industry undergoes the rapid environment change such as the rapid technology development, shortening of product life cycle and so on. ITU-T as the representative international standardization organization reforms working methods for coping with the change of telecommunications environment and more efficient standardization. In this paper, we will examine the change of standardization working methods of ITU-T coping with the change of telecommunications environment and suggest a national policy to promote the efficient international standardization.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.7
• /
• pp.97-105
• /
• 2002

The use of rapid prototyping (RP) has reduced time to market, cut total costs and improved product quality by giving design and manufacturing teams the opportunity to verify and fine tune designs before committing them to expensive tooling and fabrication. In order to improve their unique characteristics according to the working principles, Variable Lamination Manufacturing process (VLM-ST) and corresponding CAD/CAM software (VLM-Slicer) is developed. The objective of this study is to improve the accuracy of VLM-ST process, and it can be done by offset fur cutting error correction, cutting path overrun fur sharp edge and reference shape generation for off-line stacking. It has been shown that, through the verification experiments for given practical shapes, the proposed algorithms are effective for diverse categories of three-dimensional shapes.

• Food Science of Animal Resources
• /
• v.34 no.6
• /
• pp.749-756
• /
• 2014

A rapid and simple analytical method for L-carnitine was developed for infant and toddler formulas by liquid chromatography tandem mass spectrometry (LC-MS/MS). A 0.3 g of infant formula and toddler formula sample was mixed in a 50 mL conical tube with 9 mL water and 1 mL 0.1 M hydrochloric acid (HCl) to chemical extraction. Then, chloroform was used for removing a lipid fraction. After centrifuged, L-carnitine was separated and quantified using LC-MS/MS with electrospray ionization (ESI) mode. The precursor ion for L-carnitine was m/z 162, and product ions were m/z 103 (quantitative) and m/z 85 (qualitative), respectively. The results for spiked recovery test were in the range of 93.18-95.64% and the result for certified reference material (SRM 1849a) was within the range of the certificated values. This method could be implemented in many laboratories that require time and labor saving.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.8 no.1
• /
• pp.19-25
• /
• 2011

This study presents the design of digital amplifier.controller for a proportional control valve and the development of PID discrete control scheme by using RCP(Rapid Controller Prototyping) system. RCP system is the device to embed the control code developed in PC into the microcontroller on-site. Ramp input test using the digital amplifier.controller developed in this study was carried out for the proportional control valve of domestic production and Bosch Rexroth respectively. The instability problem occurred around maximum displacement of localized valve spool at ramp input test was solved by supplementing offset current to the duty ratio of PWM(Pulse Width Modulation) driving signal to the solenoid. The comparison of test results between localized proportional control valve and Bosch Rexroth's product shows that the characteristics obtained by ramp input test and static flow gains are alike each other. Two valves are about the same in dead bands and hysteresis characteristics.

• Applied Microscopy
• /
• v.28 no.4
• /
• pp.539-549
• /
• 1998

The silk glands of the spiders are of several types. Among the several types of spider's silk glands, the principal fibers used in constructing the eggcase are products of the tubuliform glands (TBG), which are present only in females. Development of these glands parallels maturations of the ovaries and fat bodies. In order to understand the mechanism of eggcase-silk production, this paper has examined the fine structural changes of the TBG during the period of egg maturation in the garden spider, Argiope aurentia. Between the two kinds of secretory granules observed in the glandular epithelium of the mature TBG, the electron-dense granules which have paracrystalline structure are revealed to be the precursors of the eggcase silk fibers. During the production of eggcase, rapid release of the secretory product occurs at apical surface by the mechanism of apocrine secretion. Moreover, secondary lysosomes appear due to the rapid disorganization of cellular components during the eggcase formation. Examinations of formed fibers indicate a multicomponent internal structure, and electron micrographs reveal each fiber contains numerous electron lucent fibrils embedded in an amorphous electron dense matrix. The secretory precursors are produced as separated vesicles via well-oriented rER, and no Golgi complex has been found in the glandular epithelial cells.

• Journal of the Korean Society of Costume
• /
• v.58 no.6
• /
• pp.42-53
• /
• 2008

This study is about the development of Fashion Design using of Korean Motive applied Digital Medium. With rapid change during the 21st century, digital media has emerged as the most important communication tool to facilitate speedy and interactive conversation. The recent emergence of 'Mass Customization' is a good reflection of digital transition's interactive features, realizing product variation and customization through flexibility and immediate responsiveness. In this so-called digital era, fashion is a tool that facilitates the use of digital media, while acting as the object, or the purpose, where digital media can be applied. This study looked at the development situations and future utilization method regarding digital fashion, which was recreated through digital media. In this study, a new design process was developed through digital media and actually manufactured Korean image clothing to reflect the motif of plant found in Korean folk paintings. Three-Dimensional(3D) digital shape was dressed in virtual clothing for comparison, thereby adding some features of textile design to three-Dimensional(3D) shape. Through the process, the study can provide various potential accesses to future development of fashion design utilizing digital media.