• Journal of Welding and Joining
• /
• 제30권6호
• /
• pp.120-125
• /
• 2012

Because ships and offshore structures have very large dimensions and complicated shapes, it is difficult to determine the deformation or internal stress in the structure by simple lab tests. Thus, a rigorous analysis by using the computer simulation technology is essential for obtaining their distortions by considering the entire production process characteristics. The rapid development of computer technology made it possible to analyze the heat transfer phenomena, deformation and phase transformation in the welded joint. For large shell structures, shell elements modeling contributed primarily to this development. But if a welding is done by multi-pass, shell elements whose thickness are unchangeable can hard to describe the local situation. Recently, it was researched how to introduce the imaginary temperature for V grooved multi-layer butt welding in strain-boundary method (a kind of shrinkage methodologies). In the present study, we formulated the imaginary temperature for the double bevel and double V groove by considering the thickness change of each pass through the bead and the thickness directions simultaneously and also demonstrated the feasibility of the formula by applying it to the thermal distortion analysis of the erection process of crane pedestal.

• 한국연소학회지
• /
• 제6권2호
• /
• pp.36-42
• /
• 2001

Usually, we use the flame thickness and turbulence scale to classify the flame structure on a phase diagram of turbulent combustion. The flame structure in turbulence is still in debate, and many studies have been done. Since the flame motion is rapid and its reaction zone thickness is very thin, it is difficult to estimate the flame thickness. Here, we propose a new approach to determine the reaction zone thickness based on ion current signals obtained by an electrostatic probe, which has enough time and space resolution to detect flame fluctuation. Since the signal depends on the flow condition and flame curvature, it may be difficult to analyze directly these signals and examine the flame characteristics. However, ion concentration is high only in the region where hydrocarbon-oxygen reactions occur, and we can specify the reaction zone. Based on the reaction zone existing, we estimate the reaction zone thickness. We obtain the thickness of flames both in the cyclone-jet combustor and on a Bunsen burner, compared with theoretically predicted value, the Zeldovich thickness. Results show that the experimentally obtained thickness is almost the same as the Zeldovich thickness. It is concluded that this approach can be used to obtain the local flame structure for modeling turbulent combustion.

• 한국BIM학회 논문집
• /
• 제7권4호
• /
• pp.31-38
• /
• 2017

Big Cyprus watershed, which is located in the Southwestern Florida and covers Everglades National Park that has high proportions of endangered species' habitats, plays an important role for the entire Florida ecosystem. Due to the rapid urbanization and high population growth, however, the watershed has been continuously polluted and the current regional watershed plan is not created to accommodate the speed of growth. The purpose of this study is to suggest proper protection policies and strategies for the Big Cyprus watershed by employing the Inverse Distance Weighted interpolation tool in Geographic Information System. The findings show that conservation priorities should be given in the North and South portion of the watershed area, which are proven to be the most important aisle for the habitats in the Big Cyprus. The study concludes with policy suggestions that local environmental planners should concentrate for adopting their new watershed plan in the near future.

• 한국인터넷방송통신학회논문지
• /
• 제10권2호
• /
• pp.1-6
• /
• 2010

근거리 무선 통신시스템은 사무실과 가정의 응용으로 빠르게 확장하고 있다. 무선 네트워크의 개발은 더 높은 data rate의 요구를 만족하도록 수행되었다. 이것으로 높은 주파수에서 동작하는 통신시스템 개발의 필요성이 강조된다. 따라서 근거리 무선 통신 네트워크는 테라헤르츠 주파수 쪽으로 옮겨갈 것으로 기대된다. 실내의 벽과 바닥, 천장에 의해 발생하는 전파 환경 분석은 3차원 광선방출기법을 이용하였다. 또한 테라헤르츠 주파수에서의 rough한 건물 벽면의 특성을 파악하기 위해 광학적으로 두꺼운 smooth한 건물 재질의 반사 모델로부터 접근하여 나타내었다. 전파환경 시뮬레이션 결과평균 수신 전력이 참고문헌의 결과와 유사한 결과를 얻을 수 있었다. 또한, 실내 공간의 크기가 $6m(L){\times}5m(W){\times}2.5m(H)$에서 콘크리트 벽의 경우 RMS 지연시간은 9.11 ns로 계산되었다.

• Journal of Ecology and Environment
• /
• 제40권2호
• /
• pp.125-135
• /
• 2016

Background: The objectives of this study were to establish a swimming capability model for largemouth bass using the FishXing (version 3) program, and to determine the swimming speed and feasibility of fish passage through a waterway tunnel. This modeling aimed to replicate the waterway tunnel connecting the Andong and Imha Reservoirs in South Korea, where there is a concern that largemouth bass may be able to pass through this structure. As largemouth bass are considered an invasive species, this spread could have repercussions for the local environment. Results: Flow regime of water through the waterway tunnel was calculated via the simulation of waterway tunnel operation, and the capability of largemouth bass to pass through the waterway tunnel was then estimated. The swimming speed and distance of the largemouth bass had a positive linear function with total length and negative linear function with the flow rate of the waterway tunnel. The passing rate of small-size largemouth bass (10-30 cm) was 0%at a flow of $10m^3/s$ due to rapid exhaustion from prolonged upstream swimming through the long (1.952 km) waterway tunnel. Conclusions: The results of FishXing showed that the potential passing rate of large size largemouth bass (>40 cm) through the waterway tunnel was greater than 10%; however, the passage of largemouth bass was not possible because of the mesh size ($3.4{\times}6.0cm$) of the pre-screening structures at the entrance of the waterway tunnel. Overall, this study suggests that the spread of largemouth bass population in the Imha Reservoir through the waterway tunnel is most likely impossible.

• 자원환경지질
• /
• 제52권4호
• /
• pp.291-297
• /
• 2019

단열을 통한 유체의 유동은 선형유동이 우세하다는 가정아래 Navier-Stokes 방정식에서 유도된 Stokes 방정식, Reynolds 식(또는 local cubic law), cubic law 와 같은 방정식을 이용하여 해석되고 있다. 하지만 이러한 방정식은 선형 흐름에 국한되며, 비선형 유동영역에 적용하게 되면 오류가 발생한다. 본 연구에서는 레이저 계측기를 이용하여 정밀하게 측정한 3차원 단열 자료와 Navier-Stokes 방정식과 Stokes 방정식을 지배방정식으로 한 수치모델링을 수행함으로써 비선형 유동이 일어나는 현상과 임계 레이놀즈수를 제시하였다. 레이놀즈수가 10이상이 되면 유속의 제곱에 비례하는 관성력이 점성력을 충분히 압도할 정도로 커지면서 지하수 유동이 선형영역에서 비선형 유동영역으로 전환되는 것으로 분석되었다. 이는 평균 간극과 거친 정도가 다른 두 단열에서 모두 동일하게 나타났다. 비선형 유동의 발생기작은 소용돌이 구조의 발생과 성장에 의한 것으로 알려져 있지만, 본 연구결과 단순히 소용돌이 구조가 비선형 유동을 일으키는 아니라 유속이 증가하면서 관성력의 영향이 훨씬 큰 영향을 끼치게 되어 비선형 유동이 발생하는 것으로 나타났다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제18권7호
• /
• pp.1726-1748
• /
• 2024

Trajectory planning is vital for autonomous systems like robotics and UAVs, as it determines optimal, safe paths considering physical limitations, environmental factors, and agent interactions. Recent advancements in trajectory planning and future location prediction stem from rapid progress in machine learning and optimization algorithms. In this paper, we proposed a novel framework for Spatial-temporal transformer-based feed-forward neural networks (STTFFNs). From the traffic flow local area point of view, skip-gram model is trained on trajectory data to generate embeddings that capture the high-level features of different trajectories. These embeddings can then be used as input to a transformer-based trajectory planning model, which can generate trajectories for new objects based on the embeddings of similar trajectories in the training data. In the next step, distant regions, we embedded feedforward network is responsible for generating the distant trajectories by taking as input a set of features that represent the object's current state and historical data. One advantage of using feedforward networks for distant trajectory planning is their ability to capture long-term dependencies in the data. In the final step of forecasting for future locations, the encoder and decoder are crucial parts of the proposed technique. Spatial destinations are encoded utilizing location-based social networks(LBSN) based on visiting semantic locations. The model has been specially trained to forecast future locations using precise longitude and latitude values. Following rigorous testing on two real-world datasets, Porto and Manhattan, it was discovered that the model outperformed a prediction accuracy of 8.7% previous state-of-the-art methods.

• 한국지역지리학회지
• /
• 제6권2호
• /
• pp.1-19
• /
• 2000

본 연구는 중부지역의 중심지로 발전하고 있는 대전광역시를 대상으로 노령화 지구의 공간적 분포 패턴을 분석하고자 하였다. 그 결과 노령화 지구는 대전광역시 CBD지역과 CBD인접지역, 그리고 주변지역간에 뚜렷한 차이를 나타내고 있으며, 그 분포에 있어서도 양극화 현상이 뚜렷함을 확인하였다. 그리고 인구감소지구는 노령화지구와 대체로 중복되어 있고, 비노령인구의 전출에 의하여 노령인구비율이 높아지고 있으며, 인구증가지구는 노령화 지구와 전혀 중복되어 나타나지 않고, 비노령인구의 전입에 의해 노령인구비율이 낮아지고 있다. 인구이동에 의한 노령인구의 증가여부를 확인하기 위하여 각 그룹별로 연령 코호트 분석방법을 이용하여 노령화 지구의 출현요인을 분석한 결과, 인구노령화의 진행 은 인구의 사회적 증감률 변화와 매우 밀접하게 관련되어 있고, 특히 비노령인구의 전출에 의해 노령인구비율이 높아지고 있음을 확인할 수 있었다. CBD지역과 CBD인접지역을 포함한 중심시가지에서는 결혼, 새로운 주택취득에 의한 세대분리 등의 전출, 즉, 비노령인구의 전출이 인구노령화를 촉진하는 주요인이 되고 있고, 반면 주변지역에서는 비노령인구의 지구의로의 전출뿐 아니라 새롭게 노령인구로 편입되어져 가는 연령층 인구와 사망률의 저하에 따른 평균수명의 연장으로 인한 노령인구의 절대적 증대가 인구노령화를 촉진하는 요인으로 작용하고 있다.