• 한국지반공학회논문집
• /
• 제21권6호
• /
• pp.127-135
• /
• 2005

부산점토에 대한 변형률 속도 의존적인 압밀특성을 분석하기 위해 다양한 변형률 속도의 일정 변형률(CRS) 압밀시험과 하중제어 압밀시험을 수행하였다. 부산점토에 대한 실내시험 결과에서 선행압밀하중은 압밀과정 동안에 유발되는 변형률 속도에 의존적이고 선행압밀하중에 대해 정규화시킨 압밀곡선은 유일하다는 것을 알 수 있었다. CRS 시험에서 얻어진 압밀계수 및 투수계수는 정규압밀영역에서 변형률 속도에 관계없이 일정한 값에 수렴함을 알 수 있었다. 또한 하중제어 압밀시험을 통해서 전응력이 일정한 상태에서 간극수압이 증가하는 Mandel-Cryer 효과를 볼 수 있었다. 그리고 장시간의 하중제어 압밀시험을 통해 선행압밀하중 부근에서 흙 구조의 붕괴로 인하여 급격한 간극수압의 증가현상이 관찰되었다.

• 한국지반공학회논문집
• /
• 제20권8호
• /
• pp.113-121
• /
• 2004

본 연구는 사전압밀재하공법에 의해 연약지반을 개량시 재하-제하-재재하와 같은 다양한 응력변화에 의한 2차압밀량을 추정하고자, 일정변형률 압밀시험기(CRS)를 응용한 일정재하시험장치(CLR)와 표준압밀시험기를 이용한 단계 재하시험(IL)에 의해 군산점토의 압밀특성을 비교 고찰하였다. 또한 CRS시험 후 임의 팽창시점에서 재재하시 유효과압밀비에 따른 2차압밀특성과 간극비-유효응력-시간관계 등을 파악하였다. 군산점토는 유효 과압밀비가 클수록 팽창량은 크고 2차압밀 침하량은 작게 발생하고 있으며, 일시에 하중 제거 후, 재하하는 경우에서 2차압밀계수 $C'_{\alpha}$ 는 완속제거시 보다 작게 평가되고, 유효 과압밀비가 1.4이상인 경우는 유사한 값을 제시하고 있다. 재재하시 발생되는 전체침하량을 기준으로 한 2차압밀계수 $C"_{\alpha}$는 경과시간에 따라 비선형적으로 증가하나 최종값은 급속제거시와 비교하여 유사한 값을 제시하고 있다. 간극비 변형속도는 재하시간이 증가할수록 유효 과압밀비에 관계없이 2개의 시험 모두 일정한 선형관계이고, 유효 과압밀비가 증가할수록 작게 나타나고 있다.고 있다.

• 한국자동차공학회논문집
• /
• 제6권2호
• /
• pp.168-177
• /
• 1998

The effects of the regeneration parameters such as inlet gas temperature, space velocity, oxygen concentration of the exhaust gas, and initial particulate loading on the oxidation of the particulate inside ceramic cordierite filter have been investigated through an engine experiment. As the inlet gas temperature increases, the remarkable filter temperature occurs owing to the rapid combustion rate. Though the higher space velocity affirms the safe regeneration, it also requires much fuel consumption of the burner. For that reason, the space velocity should be compromised considering the fuel economy. The excessive accumulation of the particulate may cause undesirable regeneration temperatures inside filer even under the optimized regeneration condition. The inlet gas temperature should be selected to overcome the variation of the oxygen concentration which is inherent feature of the diesel engine. It is the most important factor in the regeneration control techniques.

• Journal of Microbiology and Biotechnology
• /
• 제11권2호
• /
• pp.329-332
• /
• 2001

It has been known that, in enzymatic synthesis of cephalexin, the conversion yield was reduced by high loading of ampicillin acylase. In order to elucidate this phenomena, pH-controlled synthesis of cephalexin was examined using a purified Acetobacter turbidans acylase. When the pH of the reaction mixture was maintained at $6.20{\pm}0.04$, the reduction of the maximal conversion rate was not observed even with high enzyme loading. The kinetic parameters also suggest that pH drop during the enzymatic synthesis of cephalexin was mainly attributed to the rapid hydrolysis of D-${\alpha}$-phenylglycine methyl ester to D-${\alpha}$-phenylglycine, rather than the disappearance of 7-amino-3-deacetoxycephalosporanic acid for cephalexin synthesis. At higher molar ratio of two substrates, [D-${\alpha}$-phenylglycine methyl ester]/[7-amino-3-deacetoxycephalosporanic acid], the conversion rate was also elevated under pH-controlled enzymatic synthesis, which implies that the main reason for the pH drop is due to the production of D-${\alpha}$-phenylglycine methyl easter, the effect of a water-methanol cosolvent system on the ester, the effect of a water-methanol cosolvent system on the conversion profile was also examined. Even the though the conversion rate was increased in 10% methanol solution, a higher than 16% methanol in the reaction mixture caused an inactivation of enzyme.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.1222-1229
• /
• 1993

An advanced design environment , which is based on adaptive and knowledge -based finite elements (INTELMESH), has been developed. Unlike other approaches, INTEMMESH incorporates the information about the object geometry as well as the boundary and loading conditions to generate an ${\alpha}$-priori finite element mesh which is more refined around the critical regions of the problem domain. INTEMMESH is designed for planar domains and axisymmetric 3-D structures of elasticity and heat transfer subjected to mechanical and thermal loading . It intelligently identifies the critical regions/points in the problem domain and utilize the new concepts of substructuring and wave propagation to choose the proper mesh size for them. INTEMMESH generates well-shaped triangular elements by applying trangulartion and Laplacian smoothing procedures. The adaptive analysis involves the intial finite elements analyze and an efficient ${\alpha}$-posteriori error analysis involves the initial finite element anal sis and an efficient ${\alpha}$-posteriori error analysis and estimation . Once a problem is defined , the system automatically builds a finite element model and analyzes the problem though automatic iterative process until the error reaches a desired level. It has been shown that the proposed approach which initiates the process with an ${\alpha}$-priori, and near optimum mesh of the object , converges to the desired accuracy in less time and at less cost. Such an advanced design/analysis environment will provide the capability for rapid product development and reducing the design cycle time and cost.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2009년도 공동학술대회
• /
• pp.167-168
• /
• 2009

컨테이너를 통한 무역이 나날이 늘어감에 따라 컨테이너터미널에서는 생산성을 향상시키기 위한 많은 노력을 하고 있다. 생산성을 향상시키기 위한 방법으로는 효율적인 운영전략, 또는 생산성이 낮은 장비 도입을 통한 방법이 있을 수 있다. 장비 도입의 측면에서 최근 국내 터미널에서 최근 많이 도입하고 있는 탠덤 크레인은 20'컨테이너를 동시에 4개, 40'컨테이너를 동시에 2개를 작업할 수 있는 안벽하역장비로 기존 크레인에 비하여 생산성을 향상시킬 수 있다. 본 논문에서는 이러한 탠덤 크레인의 효율성을 높일 수 있는 선적 계획을 위한 계량적 모형과 해법을 제시하고자 한다.

• Journal of Ginseng Research
• /
• 제30권2호
• /
• pp.64-69
• /
• 2006

Gap junctional channels, allowing rapid intercellular communication and synchronization of coupled cell activities, play crucial roles in many signaling processes, including a variety of cell activities. Consequently, a modulation of the gap junctional intercellular communication (GJIC) should be a potential pharmacological target. In the present, the GJIC of a epithelial-derived rat mammary cells (BICR-M1Rk) was assessed in the presence of ginseng saponin, by using an established method of scrape-loading dye transfer assay. The transfer of Lucifer yellow (diameter: 1.2 nm) among the neighboring BICR-M1Rk cells, in which connexin43 (Cx43) is a major gap junction channel-forming protein, was significantly retarded at a concentration of $10{\mu}g/ml$ ginseng saponin. By using both methods of RT-PCR and Western blotting, it was demonstrated that ginseng saponin modulated neither the mRNA synthesis of Cx43 nor the translational process of Cx43. This ginseng saponin-induced modification of GJIC was a similar phenomenon observed under the $\beta$-glycyrrhetinic acid treatment, a well-known gap junction channel blocker. Taken together, it is reasonable to conclude that the ginseng saponin inhibits GJIC only by modulating the gating property of gap junction channels.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권2호
• /
• pp.78-86
• /
• 2002

In general, X-ray diffraction method detects the changes of crystal lattice under material surface using the angle of diffraction 2$\theta$. This technique which deals with in the presented paper can be applied to a behavior on the slipped band or the micro crack cause to material degradation. The relation between half-value breadth and cycle numbers shows three stages, which consist of rapid decrease in the initial cycle, slight decrease in the middle cycle, and then rapid decrease in the final cycle. The ratio of half-value breadth has a constant value on B/B$\_$0/ - N diagram under the loading condition except early part of fatigue life. The ratio of half-value breadth B/B$\_$0/ - log N$\_$f/ with respect to number of cycle to failure N$\_$f/ has linear behavior on B/B$\_$0/ - log N$\_$f/ diagram. Therefore, the evaluation of fatigue life by the average gradient has much less mean error than the estimation of fatigue life by log B/B$\_$0/ - log N/N$\_$f/ relation.

• 산업기술연구
• /
• 제21권B호
• /
• pp.281-286
• /
• 2001

In this study, product design and prototype manufacturing of a plastic water-pump pulley has been tried. The designed model is supposed to be made of 33 % glass reinforced resin of which the tensile strength is 180 MPa, and has 24 ribs on each side to increase its structural strength. Structural analysis under a static load of 300 kgf acting on both edges of the belt has been carried out using a commercial finite element code, MARC. The analysis result showed the maximum effective stress near a rib of designed model would be at most 35 MPa (less than 20% of the tensile strength), therefore, the plastic product would be sufficiently safe under that loading condition. On the basis of the structural analysis, a prototype of the designed model has been manufactured by using the fused deposition modelling (FDM) method which is one of the rapid prototyping (RP) methods, using ABS resin and support materials. The CAD data exported to the RP system in STL format was prepared by a commercial solid modeling software, SolidWorks. It has been proved that the plastic pulley can successfully replace the existing flow-formed steel product.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1071-1071
• /
• 2001

Near-infrared spectroscopy (NIRS) is potentially a powerful and revolutionary technology for environmental analysis. It is supported by a large body of scientific and experiential knowledge. The instrumentation is well-developed, with easy-to-use, highly dependable instruments, but at the same time it is still developing, particularly with the production of more portable and rapid instruments, and more powerful software. NIRS is used globally in numerous industries for commodity analysis. Yet NIRS is largely unknown in the field of environmental chemistry and monitoring, and is not even routinely used in soil analysis, where the research literature on NIRS extends over four decades. Part of the explanation for the poor visibility of NIRS is the fact that NIRS is not routinely taught in Chemistry programs in universities, where most environmental chemists and environmental technicians are trained. This presentation examines the unique capabilities of NIRS, such as rapid, real-time analysis; analysis of whole samples; simultaneous analysis of multiple constituents; cost-effectiveness, and portability, as they match needs for analysis in several environmental areas. Examples of NIRS usage and published and unpublished results will be described for such areas as soil and sediment analysis; water quality monitoring; and nutrient loading in application of manures and sewage sludge (biosolids) to land. Present barriers to the use of NIRS in environmental analysis will be discussed. It is argued that emerging environmental problems and increasing attention to some traditional problems will enhance the application of NIRS in the future.