• 한국화재소방학회논문지
• /
• 제26권3호
• /
• pp.40-48
• /
• 2012

심하게 소손된 화재현장은 남아 있는 잔존물만으로 초기 화재의 유형을 판단하기 곤란할 때가 많다. 화재로 인해 사람이 사망하였을 경우 혈중 헤모글로빈(Hb)-일산화탄소(CO) 농도는 생존 당시의 화재의 유형을 가늠할 수 있으며 촉진제를 사용한 급격한 화재의 경우 열기와 유독가스로 인해 재실자의 생존은 화재진행속도와 비례되어 체내 Hb-CO 농도는 낮았으며, 훈소와 같이 서서히 진행되는 연소의 경우 오랜 시간 호흡하면서 체내에 축적되는 CO 농도는 증가하였다. 이러한 인체의 Hb-CO 농도를 분석하면 생존 시 어떠한 형태의 화재에 노출되었는지 알 수 있다. 휘발유로 분신한 자살의 경우를 포함해 훈소성 화재사에 이르기까지 Hb-CO 농도는 3 %에서 최고 93 %로 다양한 농도를 보였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.257-260
• /
• 2010

고체 추진기관 연소관 내열재의 숯 및 삭마 두께를 예측하기 위한 방법을 제시하였다. 내열재 두께를 계산하기 위해서는 열 및 구조 경계조건을 정확히 알아야 한다. 제안된 방법은 연소관에서 복사, 대류 및 $Al_2O_3$ 조건에서 내열 고무의 열분해 현상을 규명하는데 매우 유용하다. 간단하고 빠르게 고무계 내열재를 초기에 설계하기 위하여 단순화된 수식 과 실험이 사용되었다. 연소관 후방 돔 부위의 숯 및 삭마 두께를 예측하는데 이용이 가능하며 실제 연소 시험을 통하여 적용 가능성을 확인하였다.

• 한국건설순환자원학회논문집
• /
• 제4권3호
• /
• pp.75-81
• /
• 2009

최근 국제적으로 급속한 경제성장으로 인한 산업부산물이 기하급수적으로 늘어가고 있다. 산업부산물중 석탄의 연소과정에서 발생하는 폐석탄회는 산업폐기물로서 막대한 처리비용과 함께 매립장 부족 등 여러 가지 많은 문제점을 발생 시키고 있다. 한국의 경우 2009년에는 580만톤 2010년 이후에는 600만톤 으로 증가될 것으로 전망되고 있으며, 개발도상국의 선진화에 따른 폐석탄회 발생량은 세계적으로 볼 때 엄청난 양이 발생될 것으로 전망 된다. 이에 따라 세계적으로 산업폐기물 재활용 및 환경을 고려한 폐석탄회를 재활용 연구가 활발히 진행되고 있으며, 이 연구에서도 자원재활용을 목적으로 폐석탄회를 이용한 고성능 숏크리트용 최적 배합비를 도출하고자 한다.

• 한국안전학회지
• /
• 제34권5호
• /
• pp.55-62
• /
• 2019

In this paper, we introduce a case of a fire accident during parking of a large truck that is repeatedly occurring. The shape and location of the combustion and electrical singularity commonly found in other vehicle fire accidents could limit the starter motor as the ignition section. In addition, it was possible to confirm the electrical melting singularity that could act as a cause of ignition between the start motor B terminal and the start motor enclosure. By combining the above investigations and investigations, it was possible to estimate the electric fire expressed from insulation breaking of the starter motor B terminal, and by using the renewable starter motor comparison product mounted on the fire vehicle, an experiment was performed to reproduce the ignition process from the starter motor under specific conditions. So. It is hoped that this will raise awareness about vehicle fires, which can lead to large fires or casualties, share the risks of using starter motors for regeneration, and help in the rapid and accurate investigation of similar vehicle fires in the future.

• Journal of Microbiology and Biotechnology
• /
• 제29권6호
• /
• pp.913-922
• /
• 2019

Magnetic $Ni_{0.7}Co_{0.3}Fe_2O_4$ nanoparticles that were prepared via the rapid combustion process were functionalized and modified to obtain magnetic $Ni_{0.7}Co_{0.3}Fe_2O_4@SiO_2-CHO$ nanocomposites, on which penicillin G acylase (PGA) was covalently immobilized. Selections of immobilization concentration and time of fixation were explored. Catalytic performance of immobilized PGA was characterized. The free PGA had greatest activity at pH 8.0 and $45^{\circ}C$ while immobilized PGA's activities peaked at pH 7.5 and $45^{\circ}C$. Immobilized PGA had better thermal stability than free PGA at the range of $30-50^{\circ}C$ for different time intervals. The activity of free PGA would be 0 and that of immobilized PGA still retained some activities at $60^{\circ}C$ after 2 h. $V_{max}$ and $K_m$ of immobilized PGA were 1.55 mol/min and 0.15 mol/l, respectively. Free PGA's $V_{max}$ and $K_m$ separately were 0.74 mol/min and 0.028 mol/l. Immobilized PGA displayed more than 50% activity after 10 successive cycles. We concluded that immobilized PGA with magnetic $Ni_{0.7}Co_{0.3}Fe_2O_4@SiO_2-CHO$ nanocomposites could become a novel example for the immobilization of other amidohydrolases.

• 한국추진공학회지
• /
• 제23권2호
• /
• pp.118-125
• /
• 2019

산화제 과잉 예연소기는 고온/고압/산화제 과잉의 환경이며, 이러한 환경에 금속은 급격한 산화가 발생할 수 있다. 본 연구에서는 고온/고압/산화제 과잉의 환경을 모사할 수 있는 설비를 구축하고 여러 금속 재질에 대해 내산화성 평가를 진행하였다. 그 결과, 온도가 높고 압력이 높은 조건에서 금속재질의 변색, 표면 거칠기에 변화와 금속 표면의 박리 현상이 관찰되었고 무게 변화도 확인하였다. 모든 실험 결과를 종합하였을 때 산화제 과잉 예연소기는 금속 재질에 대한 내산화 코팅이 필수적으로 요구되며, 사용 금속으로는 Cr과 Ni의 함유량이 가장 높은 XM-19를 활용하는 것이 좀 더 구조적 안정성을 확보할 수 있을 것으로 판단한다.

• 한국ITS학회 논문지
• /
• 제22권4호
• /
• pp.132-144
• /
• 2023

유럽과 미국을 중심으로 내연기관 자동차에서 나오는 배기가스를 줄이기 위해 친환경 자동차를 적극적으로 보급하는 정책이 펼쳐지고 있다. 우리나라에서도 '제4차 친환경자동차 기본계획'을 통해 충전인프라 개선과 인센티브제도 확대로 2025년 113만대의 친환경 자동차 보급을 목표하고 있어 전기자동차의 급격한 성장이 예상된다. 따라서 대략적이지만 구체적인 성장규모와 그에 따른 전력수요량을 도출하는 것이 필요하다. 본 연구에서는 성장모형 중 향후 전기자동차의 보급대수를 잘 설명할 수 있는 모형을 활용하여 전기자동차의 대수를 예측하였다. 그리고 선행연구에서 제시한 전기에너지 산출모형을 활용하여 「제10차 전력수급기본계획」의 목표연도인 2036년까지 전기자동차의 보급대수와 전력수요량을 제시하였다. 본 연구 결과를 토대로 향후 전기자동차 인프라 계획·구축을 위한 기초 연구자료로 활용될 것을 기대된다.

• Tribology and Lubricants
• /
• 제40권4호
• /
• pp.111-117
• /
• 2024

Due to global CO₂ emission reductions and fuel efficiency regulations, the trend toward transitioning from internal combustion engine vehicles to electric vehicles (EVs) has accelerated. Consequently, the problem of EV failures has become a focal point of active research. The parasitic capacitance generated during motor-shaft rotation induces voltage that deteriorates the raceway and ball surfaces of bearings, causing electrical damage in EVs. Despite numerous attempts to address this issue, most studies have been conducted under high viscosity lubricant and low load conditions. However, due to factors such as high-speed operation, rapid acceleration and deceleration, motor heating, and motor system-decelerator integration, current EV applications have shown diminished stability in lubrication films of motor bearings, thereby leveraging the investigation to address the risk of electrical damage. This study investigates the electrical damage to rolling bearing elements in EV motor drive systems. The experimental analysis focuses on the effects of electric currents and operational loads on bearing integrity. A test rig is designed to generate high-rate voltage specific to a motor system's parasitic capacitance, and bearing samples are exposed to these currents for specified durations. Component evaluation involves visual inspections and vibration measurements. In addition, a predictive model for electrical failure is developed based on accumulated data, which demonstrates the ability to predict the likelihood of electrical failure relative to the duration and intensity of current exposure. This in turn reduces uncertainties in practical applications regarding electrical erosion modes.

• 한국대기환경학회지
• /
• 제26권5호
• /
• pp.507-516
• /
• 2010

Stationary combustion sources such as coal-fired power plants, waste incinerators, industrial manufacturing, etc. are recognized as major sources of mercury emissions. Due to rapid economic growth, zinc production in Korea has increased significantly during the last 30 years. Total zinc production in Korea exceeded 739,000 tons in 2008, and Korea is currently the third largest zinc producing country in the world. Previous studies have revealed that zinc smelting has become one of the largest single sectors of total mercury emissions in the World. However, studies on this sector are very limited, and a large gap in the knowledge regarding emissions from this sector needs to be bridged. In this paper, Hg emission measurements were performed to develop emission factors from zinc smelting process. Stack sampling and analysis were carried out utilizing the Ontario Hydro method and US EPA method 101A. Preliminary data showed that $Hg^0$ concentrations in the flue gas ranged from 4.56 to $9.90\;{\mu}g/m^3$ with an average of $6.40\;{\mu}g/m^3$, Hg(p) concentrations ranged from 0.03 to $0.09\;{\mu}g/m^3$ with an average of $0.04\;{\mu}g/m^3$, and RGM concentrations ranged from 0.23 to $1.17\;{\mu}g/m^3$ with an average of $6.40\;{\mu}g/m^3$. To date, emission factors of 7.5~8.0 g/ton for Europe, North America and Australia, and of 20 or 25 g/ton for Africa, Asia and South America are widely accepted by researchers. In this study, Hg emission factors were estimated using the data measured at the commercial facilities as emissions per ton of zinc product. Emission factors for mercury from zinc smelting pross ranged from 4.32 to 12.96 mg/ton with an average of 8.31 mg/ton. The emission factors that we obtained in this study are relatively low, considering Hg contents in the zinc ores and control technology in use. However, as these values are estimated by limited data of single measurement of each, the emission factor and total emission amount must be updated in future.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1510-1510
• /
• 2001

NIRS uses reflectance signals resulting from bending and stretching vibrations in chemical bonds between carbon, nitrogen, hydrogen, sulfur and oxygen. These reflectance signals are used to measure the concentration of major chemical composition and other descriptors of homogenized and freeze-dried whole broiler carcasses. Six strains of chicken were analyzed and the NIRS model predictions compared to reference data. The results of this comparison indicate that NIRS is a rapid tool for predicting dry matter (DM), fat, crude protein (CP) and ash content in the broiler carcass. Males and females of six commercial strain crosses of broiler chicken (Gallus domesticus) were used in this study (6$\times$2 factorial design). Each strain was grown to 16 weeks of age, and duplicate serial samples were taken for body composition analysis. Each whole carcass was pressure-cooked, homogenized, and a representative sample was freeze-dried. Body composition determined as follows: DM by oven dried method at 105$^{\circ}C$ for 3 hours, fat by Mojonnier diethyl ether extraction, CP by measuring nitrogen content using an auto-analyzer with Kjeldhal digest and ash by combustion in a muffle furnace for 24 hour at 55$0^{\circ}C$. These homogenized and freeze-dried carcass samples were then scanned with a Foss NIR Systems 6500 visible-NIR spectrophotometer (400-2500nm) (Foss NIR Systems, Silver Spring, MD., US) using Infra-Soft-International, ISI, WinISl software (ISI, Port Matilda, US). The NIRS spectra were analyzed using principal component (PC) analysis. This data was corrected for scatter using standard normal “Variate” and “Detrend” technique. The accuracy of the NIRS calibration equations developed using Partial Least Squares (PLS) for predicting major chemical composition and carcass descriptors- such as body mass (BM), bird dry matter and moisture content was tested using cross validation. Discrimination analysis was also used for sex and strain identification. According to Dr John Shenk, the creator of the ISI software, the calibration equations with the correlation coefficient, $R^2$, between reference data and NIRS predicted results of above 0.90 is excellent and between 0.70 to 0.89 is a good quantifying guideline. The excellent calibration equations for DM ($R^2$= 0.99), fat (0.98) and CP (0.92) and a good quantifying guideline equation for ash (0.80) were developed in this study. The results of cross validation statistics for carcass descriptors, body composition using reference methods, inter-correlation between carcass descriptors and NIRS calibration, and the results of discrimination analysis for sex and strain identification will also be presented in the poster. The NIRS predicted daily gain and calculated daily gain from this experiment, and true daily gain (using data from another experiment with closely related broiler chicken from each of the six strains) will also be discussed in the paper.