• 한국국방경영분석학회지
• /
• 제29권2호
• /
• pp.131-147
• /
• 2003

The complexity of modern weapon systems using the intelligence technology demands that rapid and effective transition from force requirements to deployment and fielding. Thus this paper deals with the integration of development procedure, evolutionary acquisition, integrated test and evaluation, improvement of the requirements decision process, use of commercial products of high quality and low cost, specification deviation, and the effective use of dual use technology. In general, decision­makers, and military field users shall first consider the moving technology rapidly into use. This study is aimed to improve the defence acquisition management directive for timely force integration of weapon system.

• 전기학회논문지P
• /
• 제59권1호
• /
• pp.47-52
• /
• 2010

The low power of ultra-wideband (UWB) signal makes the acquisition of UWB signal be a more challenging task. In this paper, we propose the method of high order template signal technique that reduces the synchronization time. Experimental results are presented to show the improvements of performance in the mean acquisition time (MAT) and the probability of detection. The performance compared with the serial search, the truly random search and the random permutation search. It is shown that over typical UWB multipath channels, a random permutation search scheme may yield lower MAT than serial search.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.841-845
• /
• 1996

Reverse engineering enables a fast creation of CAD model from an existing part without any technical drawing or digital data. This method of data acquisition is necessary in several industrial applications when the modification of an existing product design has to be performed and verified afterwards. In this paper, the surface of an existing ship propeller was measured by a tactile measuring system and the acquired point data of the surface were used for modeling of a solid model in CAD system. By using LOM and casting processes, an aluminum propeller for functional test was manufactured and then its accuracy was measured by a laser scanner and compared with the origin릴 CAD data. As the results show, the use of LOM as a rapid prototyping process and casting as a secondary process delivers a functional prototype propeller which can be used for test purposes.

• 전자공학회논문지S
• /
• 제35S권11호
• /
• pp.28-36
• /
• 1998

기지국간 비동기방식을 사용하는 CDMA 이동통신 방식에서는 handoff시 초기동기 획득시간이 빠른 초기동기 획득방식이 요구되므로 정합필터를 사용하는 초기동기획득 방식이 고려될 수 있다. Rayleigh fading 채널에서 non coherent QPSK/DS-SS방식으로 신호를 수신하는 model에서 정합필터방식으로 초기동기획득을 위해 소요되는 평균 초기동기 획득시간은 직렬상관방식에 비해 정합필터의 길이에 비례하여 단축됨을 분석하였다. 그러나, 종래의 정합필터 방식이 초기동기획득시간은 단축되지만 HW복잡도로 인한 구현상의 단점을 보완하기위해 본 논문에서는 기억소자를 이용한 HW 재사용에 의해 상관 연산을 반복해서 할 수 있는 설계방안을 제시하므로써 기존 정합필터의 HW복잡도를 정합필터 분할 길이 만큼 줄일 수 있도록 하였고, Altera MAXPlus Ⅱ FPGA로 simulation하므로써 기능을 입증하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.24-27
• /
• 2001

Nowadays, increasing demand of the customized products has led to an increased usage of rapid prototyping in the product development. However, the acquisition price of a rapid prototyping equipment is still too high that not every body can afford to buy one. To offer a wide access to the users who need physical prototypes, a connection of the rapid prototyping equipment to the Internet is a viable step. It would allow a large group of customers all over the world to use the manufacturing capability of a service provider offering this kind of manufacturing service. To realize how such an e-manufacturing concept can look like, a LOM-type 3D printer developed at KIST has been used as test site and connected to the Internet. A possible user can log on to the server of the equipment and view his STL file and start the building operation from a remote place. To see whether the operation runs properly, a CCD camera is used to transmit the actual state of operation online. The result so far proves the feasibility of rapid prototyping on the Internet as well as an order-adaptive manufacturing system via web.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권4호
• /
• pp.1555-1570
• /
• 2016

For monitoring forest fires, a real-time system to prevent fires in wider areas should be supported consistently. However, there has still been a lack of the support for real-time system related to forest fire monitoring. In addition, the 'real-time' processing in a forest fire detection system can lead to excessive consumption of energy. To solve these problems, the intelligent data acquisition of sensing nodes is required, and the maximum energy savings as well as rapid and accurate detection by flame sensors need to be done. In this regard, this paper proposes a node built-in filter algorithm for intelligent data collection of sensing nodes for the rapid detection of forest fires with focus on reducing the power consumption of the remote sensing nodes and providing efficient wireless sensor network-based forest environment monitoring in terms of data transmission, network stability and data acquisition. The experimental result showed that battery life can be extended through the intelligent sampling of remote sensing nodes, and the average accuracy of the measurement of flame detection based on the distance is 44%.

• 대한전자공학회논문지SP
• /
• 제42권6호
• /
• pp.133-140
• /
• 2005

본 논문에서는 3차원 얼굴 인식기에서의 입력 데이터로 적합한 얼굴 데이터의 유클리디안 복원 시스템을 제안한다. 카메라 영상을 통한 유클리디안 복원을 위해서는 카메라의 보정정보와 복원할 특징 점의 대응 쌍 정보가 필요한데, 보정정보는 시스템의 변경이 없다면 불변한다. 따라서 고속의 유클리디안 복원을 위해서는 스테레오 영상간의 대응 쌍 정보 획득이 가장 중요하다. 시스템은 두 개의 카메라와 프로젝터 한 대로 구성하며, 피사체에 패턴을 투사하고 두 개의 카메라로부터 영상을 획득함으로써 동작한다. 사용 패턴은 단일 투사 줄무늬 패턴을 사용하며 줄무늬의 색도 정보와 채도 정보를 이용하여 '절대 코드 패턴'을 생성한다. 사용 시스템은 두 개의 카메라를 사용하기 때문에 색도 정보와 채도 정보가 비슷한 두 개의 영상을 얻을 수 있으며 이것은 획득한 두 개의 영상에 있는 줄무늬들에 대해 동일한 절대 라벨을 얻을 수 있게 한다. 절대 라벨링 된 줄무늬는 에피폴라 라인(epipolar line)상의 점들과 일대일 정합을 통해 고속의 3차원 데이터 복원을 가능하게 한다. 제안 방식은 얼굴 데이터에 적용되었으며 정확도와 총 소요 시간의 측정을 통해 제안 방식이 기존 방식에 비해 정확도 면에서 뒤지지 않으면서도 복원 속도 면에서 장점을 가짐을 확인할 수 있었다.

• 전자공학회논문지A
• /
• 제32A권5호
• /
• pp.1-13
• /
• 1995

In this paper, we evaluated the mean acquisition time and it's variance of the rapid synchronization system using the DMF(Digital Matched Filter) under the DS/CDMA system which uses the long period PN code. And we implemented the synchronization system that satisfies the specification demanded by the proposed EIA/TIA Interim Standard of Qualcomm Company. We showed that the state of the PN spreading code was estimated using the DMF(Digital Matched Filter) and then exact and fast chip synchronization could be achieved by the early-late tracking loop in the multiple channel environment. And we suggested the possibility that this synchronization system could be useful in the emerging digital cellular DS/CDMA system.

• Current Optics and Photonics
• /
• 제7권4호
• /
• pp.435-442
• /
• 2023

These days, the size of a reflective telescope has been increasing for astronomical observation. An additional optical system usually assists a large ground telescope for image analysis or the compensation of air turbulence. To guide collimated light to the external optical system through a designated path, a coudé mirror is usually adopted. Including a collimator, a coudé mirror of a ground telescope is affected by gravity, depending on the telescope's pointing direction. The mirror surface is deformed by the weight of the mirror itself and its mount, which deteriorates the optical performance. In this research, we propose an optimization method for the coudé mirror assembly for a 1-m class ground telescope that minimizes the gravitational surface error (SFE). Here the mirror support positions and the sizes of the mount structure are optimized using finite element analysis and the response surface optimization method in both the horizontal and vertical directions, considering the telescope's altitude angle. Throughout the whole design process, the coefficients of the Zernike polynomials are calculated and their amplitude changes are monitored to determine the optimal design parameters. At the same time, the design budgets for the thermal SFE and the mass and size of the mount are reflected in the study.

• 한국통신학회논문지
• /
• 제26권10A호
• /
• pp.1764-1771
• /
• 2001

It has developed a PCM signal acquisition(PCMA) system which can analyze status of signals in order to establish rapid diagnosing in TDX-families signaling service equipment. We develop the quick Fourier transform(QFT) for length 2$\^$M/ data to analyze the power spectral of the PCMA system. This algorithm can reduces the number of floating-point operations necessary to compute the DFT by a factor of two or four over direct methods or Goertzels method for prime lengths. In the experimental results, the system classifies the type of signals and finally discriminates the digit.