• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.11
• /
• pp.1955-1968
• /
• 2000

Thermal gravimetric change characteristics and gas phase product - CO, NO, $NO_2$, VOCs - generated in the process of pyrolysis and oxidation. were investigated with variation of process parameters including furnace reactor temperature both in pyrolytic and oxidative conditions. For the thermal gravimetric change characteristics. paper and wood were mainly decomposed at lower temperatures and they had similar thermal gravimetric change trend due to their similar compositions; plastics were mainly decomposed at higher temperatures; in the case of textile. natural compounds were decomposed at lower temperatures and synthetic compounds at relatively higher temperatures; food was decomposed in the wide range of temperatures possibly due to their different kinds of components. For the analysis results of gas phase product. the concentrations of NO, $NO_2$ were detected at higher level at the oxidative conditions than at the pyrolytic conditions except that of CO, which is due to complete combustion with sufficient oxygen at the oxidative condition; food gave off CO, NO, $NO_2$ more than the other wastes. VOCs were emitted more at the pyrolytic conditions than at the oxidative conditions.

• Wind and Structures
• /
• v.11 no.4
• /
• pp.275-289
• /
• 2008

Large eddy simulations have been performed within and over different types of urban building arrays. This paper adopted three dimensionless parameters, building frontal area density (${\lambda}_f$) the variation degree of building height (${\sigma}_h$), and the staggered degree of building range ($r_s$), to study the systematic influence of building spacing, height and layout on wind and turbulent characteristics. The following results have been achieved: (1) As ${\lambda}_f$ decrease from 0.25 to 0.18, the mean flow patterns transfer from "skimming" flow to "wake interference" flow, and as ${\lambda}_f$ decrease from 0.06 to 0.04, the mean flow patterns transfer from "wake interference" flow to "isolated roughness" flow. With increasing ${\lambda}_f$, wind velocity within arrays increases, and the vortexes in front of low buildings would break, even disappear, whereas the vortexes in front of tall buildings would strengthen and expand. Tall buildings have greater disturbance on wind than low buildings do. (2) All the wind velocity profiles and the upstream profile converge at the height of 2.5H approximately. The decay of wind velocity within the building canopy was in positive correlation with ${\lambda}_f$ and $r_s$. If the height of building arrays is variable, Macdonald's wind velocity model should be modified through introducing ${\sigma}_h$, because wind velocity decreases at the upper layers of the canopy and increases at the lower layers of the canopy. (3) The maximum of turbulence kinetic energy (TKE) always locates at 1.2 times as high as the buildings. TKE within the canopy decreases with increasing ${\lambda}_f$ and $r_s$ but the maximum of TKE are very close though ${\sigma}_h$ varies. (4) Wind velocity profile follows the logarithmic law approximately above the building canopy. The Zero-plane displacement $z_d$ heighten with increasing ${\lambda}_f$, whereas the maximum of and Roughness length $z_0$ occurs when ${\lambda}_f$ is about 0.14. $z_d$ and $z_0$ heighten linearly with ${\sigma}_h$ and $r_s$, If ${\sigma}_h$ is large enough, $z_d$ may become higher than the average height of buildings.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.10
• /
• pp.1765-1775
• /
• 2000

The removal of radioactive organic iodide generated from high temperature process in nuclear facility was generally performed by silver ion-exchanged synthetic zeolite (AgX). The purpose of this study is to obtain fundamental data for the substitution of natural zeolite(NZ) in stead of synthetic zeolite as supporter for the removal of methyl iodide in high temperature conditions. Therefore, NZ was modified with NaCl, $NaNO_3$ solution, and the analysis of the physical or surface characteristics through XRD, SEM-EDAX, and BET analysis was performed. In order to obtain the optimal surface-modification condition of NZ, adsorption capacities at $150^{\circ}C$ on surface-modified silver ion-exchanged NZ prepared with the variation of solution concentration were evaluated. The optimal condition of surface modification is that concentration of $NaNO_3$ and $AgNO_3$ are 1N and 1.2N, respectively(namely Ag-SMNZ). The adsorption isotherm of methyl iodide on Ag-SMNZ in a range of $100^{\circ}C$ to $300^{\circ}C$ was obtained, which is similar to that of 13X, and the maximum adsorption amount of Ag-SMNZ reached approximately 50% that of AgX. It would be evaluated that the adsorption capacity at $150{\sim}200^{\circ}C$ is relatively higher than other temperature, and the chemisorption between silver and iodide is attributed to a strong binding even after desorption test.

• Journal of the Korea Concrete Institute
• /
• v.20 no.6
• /
• pp.797-807
• /
• 2008

For this study, the semi-adiabatic temperature rising test is accomplished by using ternary system cement (OPC, BFS, FA) reducing temperature crack. Two tests are conducted; one is for the paste test, and the other is for the concrete test. As the results of paste tests, using fly ash is better to reduce hydration temperature than doing blast furnace slag. In the case of the paste mixed ternary system cement, the more fly ash is mixed and the less blast furnace slag is used, the lower the temperature is. The less the mixture ratio of blast furnace slag is and the more the mixture ratio of fly ash is, the later the temperature rising velocity and descending velocity are. Besides, the temperature is lower if water/binder ratio is high. The use of ternary system cement has the retardation effect of temperature rising because the time to reach the maximum temperature is in the order of OPC100, binary system cement, and ternary system cement. From the test, the maximum temperature of concrete used ternary system cement is $8{\sim}11^{\circ}C$ lower than that of concrete used OPC100. Moreover, temperatures rising velocity and descending velocity of ternary system cement range $47{\sim}51%$ and $37{\sim}42%$ compared with OPC100. The specimen of concrete shows remarkable low internal temperature and slow temperature rising velocity and descending velocity compared with the specimen of paste because it is that temperature loss of concrete is much more than paste specimen according to aggregates.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.375-381
• /
• 2018

This study was performed to investigate the residual characteristics of the insecticide dinotefuran in asparagus under greenhouse conditions from July to August and consequentially to obtain basic data for guidelines on the safe use of this pesticide in asparagus. Residues of dinotefuran in young stem of asparagus before and after growing mother stem were analyzed from samples collected at 0, 1, 3, 5, and 7 days after single application of a commercial formulation of dinotefuran (wettable powder, 10%) at the recommended dose (2,000 times dilution). The residue of dinotefuran in young stem of asparagus was analyzed by HPLC-UVD, and recovery of dinotefuran in young stem was tested at 0.5 and 1.0 mg/kg concentrations. As a result, the limit of quantitation (LOQ) of dinotefuran was 0.01 mg/kg, and the recovery of dinotefuran was in the range of 83.3-94.0% with a coefficient of variation less than 10%. Residues of dinotefuran in young stem of asparagus before and after growing the mother stem were lower than the tentative limit (0.05 mg/kg) from 5 and 3 days after single application, respectively. Based on these results, single application of dinotefuran (wettable powder, 10%) at the recommended dose at 7 days before harvest would have no deleterious effects on safety issues concerning pesticide residue. This result might provide basic information to construct guidelines for the safe use of dinotefuran in asparagus.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.8
• /
• pp.1221-1229
• /
• 2018

Objective: A study was conducted to evaluate the varietal differences among faba bean straws and also to assess the potentials of faba bean straws supplemented with concentrate fed at the rate 70% straws and 30% concentrate mixture on feed intake, digestibility, body weight gain and carcass characteristics of the animals. Methods: Forty yearling Arsi-Bale sheep with initial body weight of $19.85{\pm}0.29kg$ (mean${\pm}$standard deviation) were grouped in a randomized complete block design into eight blocks of five animals each based on their initial body weight. Straws included in the study were from Mosisa (T1M), Walki (T2W), Degaga (T3D), Shallo (T4S), and local (T5L) varieties of faba bean and concentrate (2:1 ratio of wheat bran to "noug" seed cake). The experiment consisted of seven days of digestibility and 90 days of feeding trials followed by evaluation of carcass parameters at the end. Results: Local variety had lower (p<0.05) in grain and straw yield compared to improved varieties but higher in crude protein, metabolizable energy contents and in vitro organic matter digestibility. The apparent digestibility of dry matter and crude protein of sheep fed Walki and Mosisa straws were higher than (p<0.05) straws from Shallo varieties. Sheep fed Walki straw had greater (p<0.05) dry matter intake, average daily gain and feed conversion efficiency than sheep fed local and Shallo straws. Slaughter body weight and empty body weight were higher (p<0.05) for sheep fed Mosisa and Walki straws as compared to sheep fed Shallo straws. Apart from this, the other carcass components were not affected (p>0.05) by variety of the faba bean straws. Conclusion: There is significant varietal differences between faba bean straws both in quality and quantity. Similarly, significant variation was observed in feed intake, digestibility, body weight gain and feed conversion efficiency among sheep fed different straws of faba bean varieties with concentrate supplement. Based on these results, Walki and Mosisa varieties could be recommended as pulse crop rotation with cereals in the study area.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.85-92
• /
• 2008

National Oceanographic Research Institute is carrying out an oceanographic survey for the entire sea areas around Korean Peninsula annually starting with the East Sea from 1996 by establishing a national oceanographic basic map survey plan for the sea areas under the jurisdiction of Korea, so this paper used the oceanographic geomagnetism data measured at the southern area of the Yellow Sea using 'Hae Yang 2000' in 1999, aiming at clarifying the cause of geomagnetic abnormality zone during the course of treating and analyzing the geomagnetic data. For treatment of magnetic data, we obtained electromagnetic force values and geomagnetic abnormality values around the investigated sea area through a process of searching and removal of bad data, correction of sensor positions, correction of magnetic field effects around the hull, correction of diurnal variation, normal correction, correction of cross point errors, etc. The electromagnetic force distribution around the investigated sea area was $49000\;{\sim}\;51600\;nT$, which is judged to be within the normal electromagnetic force intensity distribution range around the Yellow Sea. The isodynamic lines are distributed in Northeast-Southwest direction, and electromagnetic force values are increasing toward the northwest. The result of comparing the magnetic abnormality around the sea area among $124^{\circ}$ 49' 48" E, $35^{\circ}$ 10' 48" N $\sim$ $125^{\circ}$ 7' 48" E, and $35^{\circ}$ 33' 00" N sections with the elastic wave cross section and the result of modeling coincide well with the underground geological structure clarified from the existing elastic wave survey cross section. Therefore, it is judged that the distribution of magnetic force abnormality generally shows the effect pursuant to the distribution of the sedimentary basins in the Tertiary period and the bedrocks in the Cretaceous period which are well developed in the bottom of the sea.

• Journal of fish pathology
• /
• v.33 no.2
• /
• pp.145-151
• /
• 2020

The whiteleg shrimp Litopenaeus vannamei can survive in a wide range of salinity (1-40 psu). However, such variation, particularly at low salinity (1-5 psu), can affect various physiological changes such as survival rates, non-specific immunity and disease resistance. In this study, growth, non-specific immunity and disease resistance were measured following simultaneous oral feeding and addition of probiotic microbes into culture water for 73 day period. The salinity of the culture water was maintained at 3 psu by periodical salt additions. The result shows that survival rate increased significantly (5.6 vs. 15.4%) after 73 day rearing. Significant increases were identified in reactive oxygen species (ROS) production and phenol oxidase (PO) activity. However, superoxide dismutase (SOD) activity was not influenced. When the shrimp was artificially challenged with Vibrio alginolyticus, slight mortality reduction was observed in the probiotics-treated group (100 vs. 79%). In conclusion, the production of cultured whiteleg shrimp at low salinity might be increased by probiotics survivable at low salinity levels.

• Journal of Korea Water Resources Association
• /
• v.55 no.2
• /
• pp.111-120
• /
• 2022

The concept of soil moisture memory was used as a method for quantifying the function of soil to control water flow, which evaluates the average residence time of precipitation. In order to characterize the soil moisture memory, a new measurement index called stored precipitation fraction (F_p(f)) was used by tracking the increments in soil moisture by the precipitation event. In this study, the temporal and spatial distribution of soil moisture memory was evaluated along with the slope and soil characteristics of the surface (0~5 cm) soil by using satellite- and model-based precipitation and soil moisture in the Korean peninsula, from 2019 to 2020. The spatial deviation of the soil moisture memory was large as the stored precipitation fraction in the soil decreased preferentially along the mountain range at the beginning (after 3 hours), and the deviation decreased overall after 24 hours. The stored precipitation fraction in the soil clearly decreased as the slope increased, and the effect of drainage of water in the soil according to the composition ratio of the soil particle size was also shown. In addition, average soil moisture contributed to the increase and decrease of hydraulic conductivity, and the rate of rainfall transfer to the depths affected the stored precipitation fraction. It is expected that the results of this study will greatly contribute in clarifying the relationship between soil moisture memory and surface characteristics (slope, soil characteristics) and understanding spatio-temporal variation of soil moisture.

• Journal of Marine Life Science
• /
• v.1 no.1
• /
• pp.18-24
• /
• 2016

Since April 2012, doctor fish in the breeding tank and in the quarantine tank in Hanwha Aquaplanet Yeosu Aquarium have been dying, accompanied by diffuse bleeding around the mouth, in the chin, and at the bottom of the abdomen. In this study, the cause of death would be examined through the bacteriological study of doctor fish and the rearing water quality in the aquarium. The water quality and the bacterial counts of the rearing water in the exhibit tank and in the quarantine tank were analyzed once a week, starting from August to November 2014. Water quality was measured based on the following data: temperature was in the range of 24.5~26.8℃, pH at 6.77~7.94, DO at 6.15~8.61 ppm, ammonia at 0~0.93 ppm, nitrite at 0.009~0.075 ppm, and nitrate at 1.1~40.9 ppm. Studies revealed that the differences in these water quality factors were not related to the death of doctor fish. Bacterial counts in the rearing waters of Garra rufa slightly increased to 10³~10⁴ CFU/ml, just before the death of the doctor fish. Twelve strains of bacteria were isolated from the dead fish and rearing waters. The isolates were identified as Aeromonas veronii, Citrobacter freundii, Pseudorhodoferax aquiterrae, Shewanella putrefaciens, and Vibrio anguillarum on the basis of 16S rRNA gene sequences. The most dominant species was C. freundii, which showed medium sensitivity to florfenicol and norfloxacin, and was resistant to amoxacillin, doxycycline, oxytetracycline, tetracycline, and trimethoprim. Ten isolates were confirmed to be pathogenic to the doctor fish. Doctor fish infected with C. freundii and S. putrefaciens showed high mortality in the experimental groups. These results indicate that the variation in bacterial numbers in the rearing water was related to the death of doctor fish. C. freundii and S. putrefaciens were directly implicated in causing the death of doctor fish in the aquarium.