• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.4
• /
• pp.398-403
• /
• 2006

This paper describes the evaluation of the long duration current impulse withstand characteristics of ZnO blocks for high voltage surge arresters. Four ZnO varistors were manufactured with the general ceramic production method and the long duration current impulse withstand test, electrical uniformity evaluation test and microstructure observation were performed. All varistors exhibited high density, which was in the range of $5.42{\sim}5.46g/cm^3$. In the electrical properties, the reference voltage of samples was in the range of $5.11{\sim}5.25\;kV$ and the residual voltage was in the range of $8.314{\sim}8.523\;kV$. In the long duration current impulse withstand test, sample No.2 and No.3 failed at the 2nd and 4th shot of series impulse currents, respectively, but the rest survived 18 shots during the test. Before and after this test, the variation ratio of the residual voltage of samples survived was below 0.5 %, which was in the acceptance range of 5 %. According to the results of the test, it is thought that if the soldering method is improved, ZnO varistors would be possible to apply to the high voltage arresters like the station class and transmission line arresters in the near future.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.743-746
• /
• 2004

This research investigates experimentally an effect on the properties of the high flowing concrete according to variations of concrete materials and site conditions. Variations of sensitivity test are selected items as followings; (1)Concrete temperature, (2)Unit water(Surface moisture of fine aggregate), (3)Fineness modulus of fine aggregate, (4)Addition ratio of high-range water reducing agent. And fresh conditions of the high flowing concrete should be satisfied with required range including slump flow$(65{\pm}5cm)$, 50cm reaching time of slump flow$(4\~10sec)$, V-box flowing time$(10\~20sec)$, U-box height(min.300mm) and air content$(4{\pm}1\%)$. As results of sensitivity test, material variations and site conditions should be satisfied with the range as followings; (1)Concrete temperature is $10\~20^{\circ}C$ (below $30^{\circ}C$), (2)Surface moisture of fine aggregate is within ${\pm}0.6\%$, (3)Fineness modulus of fine aggregate is $2.6{\pm}0.2$ and (4)addition ratio of high range water reducing agent is within $1\%$ considered flow-ability, self-compaction and segregation resistance of the high flowing concrete.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.486-487
• /
• 2007

This paper describes the evaluation of long duration current impulse withstand characteristics of ZnO blocks for high voltage surge arresters. Four ZnO varistors were manufactured with the general ceramic production method and three abroad varistors were also prepared to be compared. All varistors exhibited high density, which was in the range of $5.42{\sim}5.49g/cm^3$. In the electrical properties, the reference voltage of all samples was in the range of 5.11~5.72kV and the residual voltage was in the range of 8.314~9.305kV. In the long duration current impulse withstand test, sample 2 and 3 failed at the 2nd and 4th shot of series impulse currents, respectively, but the rest survived 18 shots during the test. Before and after this test, the variation ratio of the residual voltage of samples survived were below 1.7%, which were in the acceptance range of 5%.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1524-1525
• /
• 2007

A flexible tactile sensor module based on polyimide matrix integrated with sensing elements and pluggable terminals connector was fabricated by polymer micromachining technology for robotic applications. The tactile sensor arrays are composed of $4{\times}4$, $8{\times}8$ and $16{\times}16$ sensing elements connected with pluggable terminals connector, respectively. Especially, both the tactile sensor array and the pluggable terminals are formed in the sensor module during the fabrication process. The fabricated tactile sensor module is measured continuously in the normal force range of $0{\sim}1N$ with tactile sensor auto-evaluation system. The value of resistance is relatively increased linearly with normal force in the overall range. The variation rate of resistance is about 2.0%/N in the range of $0{\sim}0.6N$ and 1.5%/N in the range of $0.6{\sim}1N$. Also, the flexibility of the sensing module is adequate to be placed on any curved surface as cylinder because the matrix consists of polymer and metal thin film.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.2
• /
• pp.44-51
• /
• 2014

This paper describes system definition of the extended range EV and presents cruising strategy of EV mode and ER mode. Also high voltage battery strategic SOC could be indicated and compared depends on various generator working cycles. A C-segment SUV has been produced and carried out cruising test in order to validate on highway, city and hill climbing road. This paper shows advantages and disadvantages of SOC variation on each road environments and presents the strategies as the cruising test results. On the basis of the test result, this paper suggests future works and research directions for strategy of battery management to extended range EV.

• Bulletin of the Korean Space Science Society
• /
• 2010.04a
• /
• pp.27.5-28
• /
• 2010

The unexpected observation condition or insufficient measurement modeling can lead to uncertain measurement errors. The uncertain measurement error of orbit determination problem typically consists of noise, bias and drift. It must be removed by using a proper estimation process for better orbit accuracy. The estimation of noise and drift is not easy because of their random or unpredictable variation. On the other hand, bias is a constant difference between the mean of the measured values and the true value, so it can be simply removed. In this study, precision orbit determination with SLR observations considering range bias estimation is presented. The Yonsei Laser-ranging Precision Orbit Determination System (YLPODS) and SLR NP (Normal Point) observations of CHAMP satellite are used for this work. The SLR residual test is performed to estimate the range bias of each arc. The result shows that we can get better orbit accuracy through range bias estimation.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.10 no.1
• /
• pp.27-35
• /
• 1990

As a part of studies on potassium(K) behavior in grassland with respect to magnesium(Mg) balance of ruminants, seasonal variation of K and Mg contents of forages including native gasses grown in grazing pasture and meadow were investigated. During an experimental period from April to October of 1984, two times of grazings were carried out in the orchardgrass (Dacfylis glomerata L.) and the tall fescue (Festuca arundinacea Schreb.)dominant grazing pastures, and forage plants (forages and native grasses) were sampled monthly and also K and Mg contents were determined without separating into individual plant species (Experiment 1). All the plant species grown in the two meadows which situated in the grazing pastures were harvested five times during the same period, separated into individual plant species, and botanical composition (SDR, ) and K and Mg contents of the plant species were determined (Experiment 2). The results obtained were as follows: 1. During the experimental period in the orchardgrass grazing pasture K contents of the forage plants were the highest in spring, and the seasonal variation of the contents in the orchardgrass pasture (1.5-5.8 % in a dry matter basis) was more significant than that of forage plants in the tall fescue grazing pasture (3.0- 3.8 %). 2. The Mg contents of forage plants in the orchardgrass grazing pasture ranged under 2.0 mg/g DW from Arpil until July, and the contents in the orchardgrass pasture (1.5-3.1 mg/g DW) was in the lower range than that of forage plants in the tall fescue pasture (2.0-3.8 mg/g DW). (Experiment I). 3. Orchardgrass was the dominant species in the orchardgrass meadow until July, but several species of native grasses were observed from summer (July) and native grasses such as Digitaria adscendens and Echinochlw crus-galli became dominant in autumn (October). 4. Seasonal variation of K contents of orchardgrass was in the range of 3.9-5.9 %, and the contents was higher in spring (May) and in autumn (October). The variation of white clover (Trifolium repens L.) was in the range of 3.6-5.0 %, that of tall fescue 3.8-4.8 %, and that of Italian ryegrass (Lolium multiflorum Lam.) 2.7-3.5 %, respectively. 5 . Seasonal variation of Mg content of white clover was in the range of 2.9-3.7 mg, that of tall fescue 2.0- 3.3 mg, and that of orchardgrass 1.6-2.8 mg/g DW, respectively. The variation of the contents of Italian ryegrass was in the range of 1.3-1.9 mg/g DW. And Mg contents of the forage plants were higher in summer(July) 6. In autumn (October and November ) native grasses such as D. adscendens and E. crus-galli contained lower K contents (1.7-3.9 %), but higher Mg contents (3.2-10.1 mg/g DW) than the forages contained. (Experiment 2) From the results above, it is known that K contents ranged higher in younger forages in viewpoint of growth stage and higher in spring and autumn, and that Mg contents ranged lower in spring. Therefore, the mineral imbalance or hypomagnesaemic (grass) tetany can be triggered in spring or autumn, and more frequently by such plant species as orchardgrass and Italian ryegrass with lower Mg and/or higher K contents than by tall fescue. And it is suggested that the dominant native grasses in autumn such as D. adscendens and E. emsgalli can contribute to the prevention of the tetany with higher Mg and lower K contents.

• Journal of Korean Society for Atmospheric Environment
• /
• v.5 no.1
• /
• pp.11-21
• /
• 1989

Atmospheric gaseous mercury was automatically measured by a mercury air monitor (Mercury monitor AM-1). The sample air was led to a scrubber and washed with buffer solution, and mercury was trapped with gold coated chromosorb P(AW) was successively eluted by heating the chromosorb and then detected by the cold vapor atomic absorption spectrophotometry. $SO_2, TSP, NO_x, CO, THC$. and some of meteorological factors were also measured simultaneously with mercury. A significant correlation between the concentration of mercury and those of 2,513 measurements, gaseous mercury concentration ranged from 4.73 to 112.8 $ng/m^3$ with an annual mean of 14.7$ng/m^3$ in urban area. At this place there was a clear seasonal variation with a maximuminDecember-January and aminimum in March-June. A secondary maximum existed in August to September. THe seasonal variation was found that the gaseous mercury in ambient air has a tendency to become low in spring and high in winter. Namely, the average of concentration in winter was about two times, 19.2 $ng/m^3$, higher than that in spring. In Seoul mercury levels on some months mainly Septermber-October increase with increasing relative humidity of the atmosphere. In Olympic park air levels were 8.2 (range 4.4-23.7)$ng/m^3$ with an coefficients of variation of 0.34 and in Seoul sports complex those were 7.7 (rnage 4.4-25.5) $ng/m^3$ with an coefficients of variation of 0.38 within the Seoul olympiad holding period of time. A significant diurnal mercury variation occurs both at the measuring sites and in the period of observation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.1926-1938
• /
• 2009

In this study, detection system of the blood flow variation rate was implemented using the variation effect of bio electric impedance at time of the blood pressure measurement by means of impedance method. The blood pressure measurement was performed by the oscillometric method. The mean arterial pressure was calculated using maximum amplitude algorithm. The systolic and diastolic pressure were estimated by establishment of the various characteristic ratio according to mean arterial pressure range. Alternative static current source and lock_in amplifier were introduced to impedance measurement. The variation of blood volume was measured using variation bio impedance according to induced cuff pressure at measuring area.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.611-625
• /
• 2022

One of the applications of geomagnetic paleo-secular variation (PSV) is the age dating of archeological remains (i.e., the archeomagnetic dating technique). This application requires the local model of PSV that reflects non-dipole fields with regional differences. Until now, the tentative Korean paleosecular variation (t-KPSV) calculated based on JPSV (SW Japanese PSV) has been applied as a reference curve for individual archeomagnetic directions in Korea. However, it is less reliable due to regional differences in the non-dipole magnetic field. Here, we present PSV curves for AD 1 to 600, corresponding to the Korean Three Kingdoms (including the Proto Three Kingdoms) Period, using the results of archeomagnetic studies in the Korean Peninsula and published research data. Then we compare our PSV with the global geomagnetic prediction model and t-KPSV. A total of 49 reliable archeomagnetic directional data from 16 regions were compiled for our PSV. In detail, each data showed statistical consistency (N > 6, 𝛼₉₅ < 7.8°, and k > 57.8) and had radiocarbon or archeological ages in the range of AD 1 to 600 years with less than ±200 years error range. The compiled PSV for the initial six centuries (KPSV0.6k) showed declination and inclination in the range of 341.7° to 20.1° and 43.5° to 60.3°, respectively. Compared to the t-KPSV, our curve revealed different variation patterns both in declination and inclination. On the other hand, KPSV0.6k and global geomagnetic prediction models (ARCH3K.1, CALS3K.4, and SED3K.1) revealed consistent variation trends during the first six centennials. In particular, the ARCH3K.1 showed the best fitting with our KPSV0.6k. These results indicate that contribution of the non-dipole field to Korea and Japan is quite different, despite their geographical proximity. Moreover, the compilation of archeomagnetic data from the Korea territory is essential to build a reliable PSV curve for an age dating tool. Lastly, we double-check the reliability of our KPSV0.6k by showing a good fitting of newly acquired age-controlled archeomagnetic data on our curve.