• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.9
• /
• pp.669-676
• /
• 2013

In this study, we introduce a polymer(polyimide) based pressure sensor to measure real-time heart beat and blood pressure. The sensor have been designed with consideration of skin compatibility of material, cost effectiveness, manufacturability and wireless detection. The designed sensor was composed of inductor coils and an air-gap capacitor which generate self-resonant frequency when electrical source is applied on the system. The sensor was obtained with metalization, etching, photolithography, polymer adhesive bonding and laser cutting. The fabricated sensor was shaped in circular type with 10mm diameter and 0.45 mm thickness to fit radial artery. Resonant frequencies of the fabricated sensors were in the range of 91~96 MHz on 760 mmHg pressurized environment. Also the sensor has good linearity without any pressure-frequency hysteresis. Sensitivity of the sensor was 145.5 kHz/mmHg and accuracy was less than 2 mmHg. Real-time heart beat measurement was executed with a developed hand-held measurement system. Possibility of real-time blood pressure measurement was showed with simulated artery system. After installation of the sensor on skin above radial artery, simple real blood pressure measurement was performed with 64 mmHg blood pressure variation.

• Journal of Life Science
• /
• v.9 no.6
• /
• pp.671-676
• /
• 1999

RAPD analysis using random primers were tried to evaluate the genetic variation and diversity of the nine garlic cultivars including two foreign varieties. Thirty-two primers out of 70 primers screened were used to amplify genomic DNA of garlic cultivars using polymerase chain reaction(PCR). Among a total of 151 bands amplified by 32 primers, 125 polymorphic bands were subjected to analysis for genetic relationship of garlic cultivars. The estimated size of amplified PCR products were in the range of 932 to 4,060 base pairs. Nine garlic cultivars were classified into two groups, such as group I corresponded to Changnyung and Hungary cultivars, and group II, Namdo, Sandong from China, Yecheon, Euiseong, Youngweol, Danyang, Jeongsun cultivars, with the genetic distance value of 0.271. The major ecological types of garlics, so called southern and northern types, was grouped in the genetic distance value of 0.200. The results presented in this study suggest that RAPD analysis are likely to be useful for identification of cultivars and evaluation of genetic origin in garlics.

• Journal of the Korean Society of Tobacco Science
• /
• v.14 no.2
• /
• pp.104-115
• /
• 1992

The present study was conducted to compare the relative efficiency of four different breeding methods in tobacco varietal development. A single Fl hybrid plant from cross of two flue-cured cultivars of Nicotiana tabacum L Bright Yellow 4(BY4) and NC95, was selfed. F2population above cross was screened for resistance against bacterial wilt caused by Pseudommonas solanacearum E.F.Smith under the naturally infested field conditions, and the 30 lines were developed from F2 individual plant by anther culture (ADH), maternal method utilizing Nicotiana afpicana (MDH), single- seed descent(SSD) and Bulk breeding method, respectively. All characters except content of total alkaloids of ADH and MDH which wore bred by haploid methods reduced more than that of lines bred by conventional methods(SSD & Bulk) : however, the yields were 8% lower than other lines. The total alkaloid content of ADH was higher than that of MDH, and yield was reduced about 4n even though the number of leaf was identical with the MDH. All other characters of ADH were also reduced significantly. In the lines bred by conventional methods, population developed by SSD showed significantly wider leaf width, shorter plant height, later days to flower, and lower in percent reducing sugar than those by Bulk. The populations derived from haploid method showed greater phenotypic variance and wider range of variation than conventionally developed ones. The results obtained indicate that selection will provide a significantly greater genetic gain for leaf number and leaf length in the ADU and MDH populations, and for plant height and days to flower in the SSD and Bulk populations.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.6
• /
• pp.767-777
• /
• 2014

Characterizing local chicken types and their mostly rural production systems is prerequisite for designing and implementing development and conservation programs. This study evaluated the management practices of small-scale chicken keepers and the phenotypic and production traits of their chickens in Oman, where conservation programs for local livestock breeds have currently started. Free-range scavenging was the dominant production system, and logistic regression analysis showed that socio-economic factors such as training in poultry keeping, household income, income from farming and gender of chicken owners influenced feeding, housing, and health care practices (p<0.05). A large variation in plumage and shank colors, comb types and other phenotypic traits within and between Omani chicken populations were observed. Male and female body weight differed (p<0.05), being $1.3{\pm}0.65$ kg and $1.1{\pm}0.86$ kg respectively. Flock size averaged $22{\pm}7.7$ birds per household with 4.8 hens per cock. Clutch size was $12.3{\pm}2.85$ and annual production $64.5{\pm}2.85$ eggs per hen. Egg hatchability averaged $88{\pm}6.0%$ and annual chicken mortality across all age and sex categories was $16{\pm}1.4%$. The strong involvement of women in chicken keeping makes them key stakeholders in future development and conservation programs, but the latter should be preceded by a comprehensive study of the genetic diversity of the Omani chicken populations.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.3
• /
• pp.59-67
• /
• 1993

The variations of the natural frequencies and the peak response acceleration at the top of prestressed concrete reactor building due to random variability and/or model uncertainty of structural parameters are studied. The results may be used as essential input parameters in seismic probabilistic risk assessment or seismic margin assessment of the reactor building. The sensitivity test of each structural parameter is first performed to determine the most influential parameter upon the natural frequency of structure model. Then Monte Carlo simulation technique is applied to evaluate the effect of parameter variation on the natural frequencies and the peak response acceleration. The acceleration time history is obtained by direct integration scheme. As the study results, it is found that the fundamental natural frequency and the peak response acceleration at the top of the building are most strongly affected by Young's modulus among the structural parameters, in which the value of mean plus one standard deviation obtained by probabilistic approach deviates up to about (+)12% from the result of deterministic method. Considering the uncertainty of flexural rigidity, the structural responses vary in range of (-)4%~(+)14%.

• Journal of Korean Society on Water Environment
• /
• v.25 no.6
• /
• pp.922-934
• /
• 2009

The transport of contaminants and spatial variation in a deep reservoir are certainly governed by the thermal structure of the reservoir. There has been continuous efforts to utilize three-dimensional (3D) hydrodynamic and water quality models for supporting reservoir management, but the efforts to validate the models performance using extensive field data were rare. The study was aimed to evaluate a 3D hydrodynamic model, ELCOM, in Daecheong Reservoir for simulating heat fluxes and stratification processes under hydrological years of 2001, 2006, 2008, and to assess the impact of internal wave on the reservoir mixing. The model showed satisfactory performance in simulating the water temperature profiles: the absolute mean errors at R3 (Hoenam) and R4 (Dam) sites were in the range of $1.38{\sim}1.682^{\circ}C$. The evaporative and sensible heat losses through the reservoir surface were maximum during August and January, respectively. The net heat flux ($H_n$) was positive from February to September, while the stratification formed from May and continued until September. Instant vertical mixing was observed in the reservoir during strong wind events at R4, and the model reasonably reproduced the mixing events. A digital low-pass filter and zero crossing method was used to evaluate the potential impact of wind-driven internal wave on the reservoir mixing. The results indicated that most of the wind events occurred in 2001, 2006, 2008 were not enough to develop persistent internal wave and effective mixing in the reservoir. ELCOM is a suitable 3D model for supporting water quality management of the deep and stratified reservoirs.

• Journal of Korean Society on Water Environment
• /
• v.23 no.1
• /
• pp.72-80
• /
• 2007

The seasonal variation of organic matter and the oxidation efficiency of BOD and COD were investigated in several reservoirs and rivers located in the Han River system from March 2005 to April 2006. The concentrations of TOC in the Dong River, the Myeongjicheon stream and the Han-River varied with season. Mean concentration of TOC in the lotic environment ranged from 1.9 to 6.8 mgC/L. Oxidation efficiencies calculated from carbon were approximately 12.6 to 27.1% for BOD and 27.2 to 75.0% for COD, respectively. DOC to TOC ratio in the rivers ranged from 64.3 to 79.0%. Epilimnetic TOC concentrations in two clear and deep lakes (Lake Soyang and Paro) ranged from 2.0 to 2.8 mgC/L. TOC concentrations in the lower three dams (Lake Chunchon, Uiam, and Chungpyung) were relatively high that ranged from 3.4 to 3.7 mgC/L.Oxidation efficiencies in five lakes ranged from 10.6 to 17.2% for BOD and 32.6 to 49.5% for COD, respectively. The range of DOC to TOC in Lake Soyang and Paro was approximately 69. 0 to 73.4%. The ratios of lower three dams ranged from 48.2 to 62.3%. The differences among the lakes seemed to be asociated with limnological and hydrological characteristics of the lakes.

• Journal of the Korean Society for Heat Treatment
• /
• v.10 no.4
• /
• pp.255-265
• /
• 1997

Precipitation and strengthening mechanisms in squeeze cast Mg-8.5wt%Li-4.5wt%Al have been investigated by differential scanning calorimetry(DSC), scanning electron microscopy(SEM), in-situ and ex-situ X-ray diffraction analysis and hardness measurement. Special emphasis was placed on the investigation of the precipitation behavior by the DSC technique. Microstructural and calorimetric analysis showed that ${\theta}$ and ${\delta}$ precipitates in the b.c.c. ${\beta}$ phase matrix, forming two exothermic peaks at the temperature ranges of $130^{\circ}C{\sim}180^{\circ}C$ and $236^{\circ}C{\sim}280^{\circ}C$. ${\theta}$ and ${\delta}$ dissolve into the matrix forming an endothermic peak at the temperature range of $280^{\circ}C{\sim}352^{\circ}C$. The as-cast microstructure consists of ${\alpha}$, ${\beta}$ and ${\delta}$. Peak strength was obtained after aging for 1 hour at $50^{\circ}C$. The aging time required for the peak strength decreased as the aging temperature increases. The hardness decrease during overaging was due to the coarsening of ${\theta}$ precipitates. Microhardness measurement showed that variation of the hardness of ${\beta}$ matrix was more pronounced than that of the ${\alpha}$ phase, indicating that the ${\beta}$ phase is more responsible for the strengthening of the Mg-8.5wt%Li-4.5wt%Al alloy.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.4
• /
• pp.307-315
• /
• 1989

In this paper, we have analyzed the temperature variation trend of a slab on between the process of reheating furnace and the termination of roughing mill process during hot rolling process. 1) cooling by radiation and convection current in the air, 2) plastic deformation heat, 3) cooling by descaling water, 4) cooling by contact with rolling rolls and/or transmitting rolls. For the analysis, the factors have been adopted as the problems of the rolling process to be solved such that we have established an application technique in relation to the determination of boundary conditions on the slab surface. We have presented a procedure for an analysis of the cooling phenomenon treated as a problem of two-dimensional transient heat flow using finite difference equation and suggested techniques of implementing sequentialized rolling tasks in correlation with the procedure. From the result of simulation, it is shown that the difference between calculation value and measurement value is within the range of the industrial measurement error. Also, it is proved that the assumptions, conditions, and properties used in the computer simulation is appropriate by showing that the pattern of a drop in temperature at each rolling event is in accord with real circumstances.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.8
• /
• pp.640-646
• /
• 2001

The electrical stability for DC stress of Pr$_{6}$O$_{11}$-based ZnO varistos consisting of ZnO-Pr$_{6}$O$_{11}$-CoO-Cr$_2$O$_3$-Er$_2$O$_3$-based ceramics were investigated with sintering temperature in the range of 1325~1345$^{\circ}C$. A the sintering temperature is raised, the nonlinear exponent of varistors was decreased, whereas the stability was markedly improved. The density of ceramics was found to greatly affect the electrical stability for DC stress. The varistors sintered at 13$25^{\circ}C$ were completely degraded because of thermal runaway attributing to low density. The varistors sintered at 1335$^{\circ}C$ exhibited the highest nonlinearity, with a nonlinear exponent of 70.53 and a leakage current of 1.92$\mu$A, whereas they did not exhibit relatively high stability. On the contrary, the varistors sintered at >134$0^{\circ}C$ exhibited not only a high nonlinearity marking the nonlinear exponent above 50 and the leakage current below 3$\mu$A, but also a high stability marking the variation rate of the varistor voltage below 2%, even under DC stress such as (0.80V$_{1mA}$/9$0^{\circ}C$/12h)+(0.85V$_{1mA}$/115$^{\circ}C$/12h)+(0.90V$_{1mA}$/12$0^{\circ}C$/12h)+(0.95V$_{1mA}$/1$25^{\circ}C$/12h)+(0.95V$_{1mA}$/15$0^{\circ}C$/12h). In particular, ti was found that the varistors sintered at 134$0^{\circ}C$ were more nonlinear and more stable, compared with that of 1345$^{\circ}C$.EX>.}C$.EX>.