• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.3
• /
• pp.289-295
• /
• 2009

HRR(High Resolution Range) profiles show one-dimensional radar images including electromagnetic scattering phenomena of a target. Thus, they are not only robust to noise, but also easily obtainable in a real-time. However, in order to construct a training database for the success of radar target identification, a huge amount of HRR profiles are needed because HRR profiles are highly dependent on the relative angle between the radar and the target. In order to alleviate this difficulty, a database construction method based on the scenarios of target's movement is proposed. The proposed method is able to provide a reliable target identification performance even with a small amount of training database.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.20 no.3
• /
• pp.137-154
• /
• 2007

Purpose: The purpose of this study was to investigate Minnesota Multiphasic Personality Inventory on clinical scales and personality scales of dysmenorrhea patients. Methods : 29 dysmenorrhea patients were tested by MMPI and QSCC II. It is analyzed by one-way ANOVA, Crosstabulation, t-test, and by Duncan method in case of significant difference. Results and Conclusion : 1. The MMPI scores of dysmenorrhea patients were normal range that was elevated in Hs, Hy clinical scales, 1-3 profile type which is profile of conversional neurosis. 2. All of the profiles can be classified three types of profile. Group 1(44.8%) showed a normal profile. Group 2(20.7%) showed a normal profile but elevated in Mf, Ma scales, suggesting mainly extroverted and psychopathic personality. Group 3(34.5%) showed 1-3 profile type which is profile of conversional neurosis. 3. MDQ score and age of dysmenorrhea patients are related to personality in MMPI profile of dysmenorrhea patients.

• Phonetics and Speech Sciences
• /
• v.13 no.4
• /
• pp.89-100
• /
• 2021

This study compared the voice range profiles (VRPs) with glissando and simplified VRP methods with 57 men who were in premutation (8-13 years), mutation (11-16 years), and postmutation (10-24 years) stages. The difference between modal and falsetto areas measured in two VRP methods was also compared. As the results, the average fundamental frequency (F0) was in the order of premuaton>mutation>postmutation. The maximum F0 (F0max), the range of F0 (F0range), the maximum intensity (Imax), and the range of intensity (Irange) were the lowest in the mutation stage, and these variables were higher in falsetto area than in modal area in both methods. In addition, most variables of VRP in glissando were higher than in simplified VRP, but the differences were not significant. This study showed that, in men in mutation stage, due to the temporary anatomical and physiological changes of the larynx, the mechanism of the vocal folds vibration changes and VRP shows a different pattern from that of other age groups. Both the VRPs of glissando and simplifed VRP are suitable for clinical practice by experienced examiners. And it is necessary to measure not only the falsetto area but also the modal area when measuring VRP.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.252-255
• /
• 1999

Feed rate in the fed-batch reactor is the most important control variable in optimizing the reactor performance. Exact solution can be obtained only for limited cases of simple reactor. The complexity of the model equations makes it extremely difficult to solve fur the general class of system models. Evolutionary programming method is proposed to get the information of the profile types, and the final profile is calculated by that information. The modified evolutionary programming method is used to get the more optimal profiles and it is demonstrated that proposed method can solve a wide range of optimal control problems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.195-198
• /
• 2002

Demand for high precision measurement of large area is increasing in many industrial fields. White-light Scanning Interferometer(WSI) is a well-known method for 3D profile measurement. However WSI has some limitations in a measurement range because of the sensing mechanism. Therefore, in this paper we use a heterodyne laser interferometer to get over the limitations of a short measurement range in WSI, We suggest a new WSI system combined with heterodyne laser interferometer. This system is aimed at eliminating Abbe error with measuring the focus point directly. With the use of triggering functionality of WSI, we can use this system as a probe of a precision stage such as a probe of CMM. The suggested system gives a repeatability of 87 nm in the absolute distance measurement test under the laboratory environment.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.550-553
• /
• 2005

To acquire radar target signature, various kinds of target are necessary. Measurement is one of the data acquiring method, but much time and high cost is required to get the target data from the real targets. Even if we can afford that, the targets we can access are very limited. To obtain target signatures avoiding these problems, we build the target CAD (Computer Aided Design) model for the calculation of target signatures. To speed up RCS calculation, we applied adaptive super-sampling and tested quite complex tank CAD model which is 1.4 hundred of thousands facet. We use calculated RCS data for ID range profile and 2D ISAR (Inverse Synthetic Aperture Radar) image formation. We adopted IFFT (Inverse Fast Fourier Transform) algorithm combined with polar formatting algorithm for the ISAR imaging. We could confirm the possibility of the construction of database from the images of CAD models for target classification applications.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.10 no.2
• /
• pp.68-73
• /
• 2011

In Ground Penetrating Radar (GPR) for buried object detection, it is important to identify a buried target because removal of an unwanted target requires as much time and effort as does a wanted target. For a simulation of the target identification, the FDTD (Finite Difference Time Domain) and PML (Perfectly Matched Layer) techniques are widely used. Simulation results vary depending on the type of the buried object and the position of the source. As a result, this paper illustrates the range (time) profile of the five types of facilities including PEC (Perfect Electric Conductor) rectangular box and pipes, and shows the comparison of the range profile of the buried facilities.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.7 s.94
• /
• pp.1731-1739
• /
• 1993

An application of Scanning Tunneling Microscopy(STM) is investigated for the measurement of 3-dimensional profiles of the macro-machined patterns of which critical dimensions lie in the range of submicrometers. Special emphasis of this investigation is given to extending the measuring ranges of STM upto the order of several micrometers while maintaining superb nanometer measuring resolution. This is accomplished by correcting hysteresis effects of piezoelectric actuators by using non-linear compensation models. Detailed aspects of design and control of a prototype measurement system are described with some actual measuring examples in which fine It patterns can successfully be traced with a resolution of 1 nanometer over a surface range of $4{\times}2$ micrometers.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.1
• /
• pp.47-56
• /
• 2008

In the detection of an underwater target, there exists an optimal search depth for the sonar systems, at which the Probability of Detection is maximized. The optimal search depth is dependent on the depths of the target and sonar, the sound speed profile, and the bathymetry. In this paper, we address this question in range-dependent environments, particularly for the bathymetry with slope and with warm eddy. For range-dependent bathymetry, the typical sound profile in the East Sea of Korea was used. The detection range was greater when the sonar was located in deep water than in shallow water. As for the case of eddy, mesoscale warm eddy was used, and the detection range was greater when looking out of the warm eddy than when looking into the eddy.

• The Mathematical Education
• /
• v.57 no.2
• /
• pp.75-92
• /
• 2018

Based on Perceptions about Mathematics Teachers (PMT) perceived by high school students, measured by 2189 students from Seoul Educational Longitudinal Study 2014 (SELS 2014), latent profile analysis (LPA) identified five distinct types of student groups (positive, partial positive, middle, negative, extreme negative). These student of positive, middle, and negative groups are positive, moderate and negative perceptions about math teachers. Partial positive group generally had a positive perception about mathematics teachers, extremely negative group was very negative about mathematics teachers. Both of these groups had peculiarly inconsistent trends and several anomalies. The Multinomial logistic regression analyses also indicated that individual factors (gender, major, self-concept, resilience, self-assessment, career maturity), school factors (friendship, relationship with school teachers) and parental factors (academic-relationship, emotional-relationship) were significant predictors of PMT profile groups. The Analysis of variance also indicated that mathematics class (attitude, satisfaction and atmosphere), Mathematics achievement were significant predictors of PMT profile groups. The profiling of perceptions about mathematics teachers resulted in enhanced understanding of the complex range of processes students employed. During mathematics class, implementation of smooth interactions and communications between students and teachers added in the teaching and learning of mathematics.