• International Journal of Fluid Machinery and Systems
• /
• 제3권1호
• /
• pp.20-28
• /
• 2010

This paper deals with the Design and Analysis of a Controlled Diffusion Aerofoil (CDA) Blade Section for an Axial Compressor Stator and Effect of incidence angle and Mach No. on Performance of CDA. CD blade section has been designed at Axial Flow Compressor Research Lab, Propulsion Division of National Aerospace Laboratories (NAL), Bangalore, as per geometric procedure specified in the U.S. patent (4). The CFD analysis has been performed by a 2-D Euler code (Denton's code), which gives surface Mach No. distribution on the profiles. Boundary layer computations were performed by a 2-D boundary layer code (NALSOF0801) available in the SOFFTS library of NAL. The effect of variation of Mach no. was performed using fluent. The surface Mach no. distribution on the CD profile clearly indicates lower peak Mach no. than MCA profile. Further, boundary layer parameters on CD aerofoil at respective incidences have lower values than corresponding MCA blade profile. Total pressure loss on CD aerofoil for the same incidence range is lower than MCA blade profile.

• Bulletin of the Korean Chemical Society
• /
• 제19권5호
• /
• pp.549-553
• /
• 1998

The structure and layer distribution of cadmium arachidate Langmuir-Blodgett film were analyzed by the small angle X-ray reflectivity measurements using synchrotron radiation. Y-to X type transition was ocurred during the 39th passage of deposition of cadmium arachidate. Based on the measurement of the consumed area of the monolayer, it was determined that about 27.5 layer was deposited. Using the synchrotron X-ray, the reflectivity profile of cadmium arachidate LB film over the wide range of grazing angle was obtained. The X-ray reflectivity profile was analyzed using the recursion formula. By fitting the location and dispersion of the subsidiary maxima between the Bragg peaks of the measured reflectivity profile with that of the calculated reflectivity profile, the average thickness and the distribution of layer thickness were evaluated. The genetic algorithm was adopted to the fitting of reflectivity profile to evaluate the optimum value of the number distribution of layer. Based on the morphology measurement with an atomic force microscopy (AFM), the domain structure and mean roughness of LB films were obtained. The mean roughness value calculated based on the number of layer distribution obtained from the measurement by AFM is consistent with that obtained from X-ray reflectivity analysis.

• 한국정보통신학회논문지
• /
• 제5권6호
• /
• pp.1163-1168
• /
• 2001

거리 계측 시스템은 물체까지의 거리를 삼차원 좌표계에서 측정하는 장치이다. 군용 장비나 건설, 항해, 검사 조립, 로봇 비전 등에 널리 사용되는 무접촉식 원격 거리 계측(ranging) 시스템은 자동화 응용에 매우 중요하다. 계측 방식은 active와 passive방식으로 구분되는데, active방식은 laser나 microwave, 초음파 등의 time of flight를 이용하거나 레이저 조사(illumination)에 대한 카메라 영상을 해석하는 등의 다양한 방식이 있으나 장치가 복잡하며, passive 방식은 stereo camera의 양안영상을 이용하거나 focus특성을 이용하는 방식 등이 있으나 대부분 연산시간이 많이 요구된다. 본 연구에서는 수동식 스테레오 카메라에서 양안시차를 산출하여 triangulation으로 목표전의 거리를 측정하는 방식에서, 연산 시간이 많이 소요되는 과정을 고속으로 처리하는 새로운 방식을 제안하였다. 즉, 목표점에서의 양안 edge 영상을 구하고, 이 영상의 projection profile을 cross correlation하여, 시차를 고속으로 산출해 거리를 구하는 알고리즘을 제안하였으며, 이 방식의 효율성을 실험 결과를 통하여 보였다.

• 한국수자원학회논문집
• /
• 제53권12호
• /
• pp.1211-1220
• /
• 2020

본 연구에서는 소형 X-밴드 이중편파 레이더의 수평반사도 (ZH), 차등반사도(ZDR), 교차상관계수(ρHV)의 RHI(range height indicator) 연직단면과 PPI (plan position indicator)의 고도각 경사거리(slant range) 빔의 프로파일 분석을 통하여 밝은 띠(bright band, BB)의 특성을 탐색하였다. 분석 결과, X-밴드 레이더의 이중편파 변수들을 이용하여 밝은 띠 영역을 명확히 탐지할 수 있었으며, 동시간대의 RHI 및 PPI 관측 자료를 이용한 이중적인 밝은 띠 영역을 탐색하여 그 결과가 일치함을 확인하였다. 이 결과를 토대로 현업에서 RHI 관측없이 PPI 볼륨관측만 수행하는 대형 강우레이더에도 본 연구의 PPI 고도각 경사거리에 의한 BB 탐색 방법을 적용함으로써 QPE (quantification of precipitation estimation)의 정확성을 향상시킬 수 있다.

• 대기
• /
• 제24권4호
• /
• pp.523-532
• /
• 2014

In this study, thermal tropopause height defined from WMO (World Meteorological Organization) using temperature profile derived from Advance Microwave Sounding Unit-A (AMSU-A; hereafter named AMSU) onboard EOS (Earth Observing System) Aqua satellite is retrieved. The temperature profile of AMSU was validated by comparison with the radiosonde data observed at Osan weather station. The validation in the upper atmosphere from 500 to 100 hPa pressure level showed that correlation coefficients were in the range of 0.85~0.97 and the bias was less than 1 K with Root Mean Square Error (RMSE) of ~3 K. Thermal tropopause height was retrieved by using AMSU temperature profile. The bias and RMSE were found to be -5~ -37 hPa and 45~67 hPa, respectively. Correlation coefficients were in the range of 0.5 to 0.7. We also analyzed the change of tropopause height and temperature in middle troposphere in the extreme heavy rain event (23 October, 2003) associated with tropopause folding. As a result, the distinct descent of tropopause height and temperature decrease of ~8 K at 500 hPa altitude were observed at the hour that maximum precipitation and maximum wind speed occurred. These results were consistent with ERA (ECMWF Reanalysis)-Interim data (potential vorticity, temperature) in time and space.

• 산업기술연구
• /
• 제17권
• /
• pp.261-275
• /
• 1997

The objective of this paper is to develop two numerical model for predicting the wave height with set-up/down near the surfzone on a arbitrary beach profile. Two wave models, regular wave model and random wave model, are based on the energy flux equation with the energy dissipation effects. The developed numerical models are verified by comparison of numerical results with analytical solutions that are derived under the simple conditions. The characteristics of parameters included in each model are then investigated and decided to the range of behaviour by the sensitivity analysis. For sensitivity analysis, we carried out total 46 laboratory tests. Finally, the developed numerical models are applied to the field where the wave height near the surfzone has been measured. From the applications of numerical models, it is concluded that the developed numerical models may accurately predict the wave height with the set-up/down near the surfzone on a arbitrary beach profile.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.375-378
• /
• 1998

Scattering of TE waves by a periodic conducting surface with dielectric cover is considered. A method for the aalysis of scattering from periodic structures based on the numerical solution of the integral equations is further developed. Using periodicity (Floquet's theorem), the range of the integral equations is reduced to a single period where the kernels are the Green's functions for periodic arrays. The numerical solution of the intergral equations is obtained using the method of moments. From numerical results for the reflected power the effects of surface profile shape, period-to-depth ratio, and cover permittivity on the scattering behaviors are examined.

• Journal of electromagnetic engineering and science
• /
• 제16권4호
• /
• pp.235-240
• /
• 2016

In this paper, a low-profile planar inverted-F antenna (PIFA) for ultrawideband (UWB) applications is proposed. The antenna consists of a PIFA and a ground plane with a slot. The addition of the slot not only improves the impedance matching of the PIFA but also forms an additional resonance. Therefore, the proposed antenna has a wideband characteristic covering the full UWB frequency range (3.1 GHz to 10.6 GHz) and a stable and nearly omnidirectional radiation pattern. The antenna also has a smaller volume and thickness compared to previous UWB PIFAs.

• 오토저널
• /
• 제11권4호
• /
• pp.35-42
• /
• 1989

The major purpose of this paper is a study on the effect of die profile radius on the formability of spring-type blankholder system in deep drawing process. By drawing the various materials, formability is studied by means of checking the drawing force, blankholding force variation, limiting drawing ratio and wall wrinkling phenomenon. As the die profile radius increases, the maximum drawing force and maximum blankholding force decrease regardless of lubrication condition. Because better lubrication induces blankholding force to rise, spring type blankholder system is better to protect flange wrinkling phenomenon than constant pressure type. And wall wrinkling phenomenon was not detected in experimental die radius range, so the Miyakawa's upper wrinkling limit is understimated in case of material tested.

• Journal of Welding and Joining
• /
• 제17권6호
• /
• pp.46-52
• /
• 1999

The auxiliary gas-shielded MAG (AMAG) process, which was devised to provide an argon-rich shielding environment using small amount of argon gas, was investigated experimentally to figure out its effects on metal transfer and weld quality. Proper conditions for the AMAG process including the argon gas ratio, position and direction of the auxiliary nozzle were determined experimentally. Performance of the AMAG process was compared with that of the double gas-shielded MAG(DMAG) and MAG processes by monitoring the bead profile, current and voltage waveforms. The AMAG process was found to provide better bead profile, more stable arc and wider operating range of spray transfer mode compared with the DMAG process. In general, performance of the AMAG process using the argon ratio of 30% was comparable to that of the MAG process using 80% argon and 20% CO₂ gas.