• 한국기계가공학회지
• /
• 제14권3호
• /
• pp.131-140
• /
• 2015

The purpose of this study is to predict the fatigue life of a planet carrier of a slewing reducer for a tower crane. To predict the fatigue life of the carrier, the inertia endurance test was carried out, and then the input torque profile for the reducer was obtained. The load profile acting on the planet pins that assembled the carrier was calculated from the measured input torque profile using commercial gearbox analysis software. The stress profiles of the carrier weak points were analyzed from the calculated load profile and boundary conditions using commercial FE software, and the stress cycles were determined using the rainflow counting method. Finally, the fatigue life of the carrier was predicted using the equivalent stress range by considering the effect of mean stress, and an S-N curve was drawn up using the GL guideline and the cumulative damage law.

• Geomechanics and Engineering
• /
• 제7권4호
• /
• pp.459-475
• /
• 2014

In this study, a CPT-based p-y analysis method was proposed for the displacement analysis of laterally loaded piles. Key consideration was the continuous soil profiling capability of CPT and cone resistance profiles that do not require artificial assumption or simplification for input parameter selection. The focus is on the application into offshore mono-piles embedded in clays. The correlations of p-y function components to the effective cone resistance were proposed, which can fully utilize CPT measurements. A case example was selected from the literature and used to validate the proposed method. Various parametric studies were performed to examine the effectiveness of the proposed method and investigate the effect of property profile and its depth resolution on the p-y analysis. It was found that the calculation could be largely misleading if wrongly interpreted sub-layer condition or inappropriate resolution of input soil profile was involved in the analyses. It was also found that there is a significant influence depth that dominates overall load response of pile. The soil profile and properties within this depth range affect most significantly calculated load responses, confirming that the soil profile within this depth range should be identified in more detail.

• 소성∙가공
• /
• 제24권3호
• /
• pp.212-217
• /
• 2015

SmartCrown is a system to control the plate crown by shifting the sine-shaped work rolls in the axial direction. The control range of the plate crown depends on a depth of sine-shaped roll profile because the roll radius varies continuously along the axial direction. When the roll profile is changed to improve the control range, the contact stress between the work roll and the back-up roll also changes. In the current study, the contact stress for various profiles and rolling conditions were analyzed using the finite element method and compared with results from Hertzian contact theory. A submodel method is used to increase the accuracy of the finite element analysis. The analysis results showed that the maximum increase in the contact stress was only 53MPa, so it is anticipated that no back-up roll spalling will occur.

• 말소리와 음성과학
• /
• 제15권4호
• /
• pp.53-60
• /
• 2023

본 연구에서는 음성장애 환자에서 음성 범위 프로파일(voice range profile, VRP)과 말 범위 프로파일(speech range profile, SRP)을 이용한 추정 발화 기본주파수 절대 오차(absolute error of estimated speaking fundamental frequency, AEF0)를 음성장애의 병인 집단 간에 비교하여 차이를 확인하고,각 병인 집단 별로 AEF0와 관련된 변수들 간의 상관관계를 살펴보고자 하였다. 연구대상은 음성장애로 진단된 기능적(functional, FUNC), 기질적(organic, ORGAN), 신경학적(neurogenic, NEUR) 음성장애 환자군과 정상군(normal control, NC) 각 30명(남 15명, 여 15명)으로 총 120명이었다. 각 대상자로 하여금 음성, 말 범위 프로파일 과제를 수행하도록 하고 전기성문파형검사(electroglottography, EGG)를 통해 발화 기본주파수를 측정하였다. 병인 집단 간 AEF0의 비교 결과, Grade와 Severity는 병인 집단 간 차이가 없었던 반면, AEF0_VRP와 AEF0_SUM에서 병인 집단 간 차이가 있어 AEF0_VRP는 ORGAN이 FUNC와 NC보다 높았으며, AEF0_SUM은 ORGAN이 NC보다 높았다. 또한 FUNC와 NEUR에서는 AEF0가 Grade와 양의 상관관계를 보인 반면, ORGAN은 CQ(closed quotient)와 양의 상관관계가 있었다. 따라서 병인 집단에 따라 AEF0의 적용과 관련 음성 변수를 살펴보는 데 주의를 기울여야 할 것으로 보이며, 본 연구는 이러한 임상적 판단에 대한 기초 자료를 마련하는 데 일조한 것으로 여겨진다.

• 조명전기설비학회논문지
• /
• 제27권7호
• /
• pp.52-58
• /
• 2013

The two-dimensional finite difference time domain algorithm is used to numerically reconstruct the electron density profile in O-mode ultrashort pulse reflectometry. A Gaussian pulse is employed as the source of a probing electromagnetic wave. The Gaussian pulse duration is chosen in such a manner as to have its frequency spectrum cover the whole range of the plasma frequency. By using a number of numerical band-pass filters, it is possible to compute the time delays of the frequency components of the reflected signal from the plasma. The electron density profile is reconstructed by substituting the time delays into the Abel integral equation. As a result of simulation, the reconstructed electron density profile agrees well with the assumed profile.

• 한국산학기술학회논문지
• /
• 제18권5호
• /
• pp.565-570
• /
• 2017

우수한 반사방지막을 얻기 위하여 코팅 층의 구조를 나노입자구조로 만들어 코팅 층에 입사하는 빛을 분산시키거나, 코팅 층의 매질을 다양하게 선택하여 굴절률을 제어하여 반사율을 낮추는 기술이 제안되고 있다. 본 논문에서는 코팅 층의 굴절률 분포를 변화시켜 우수한 반사방지막을 얻는 방법 중 기존논문에서 제시되었던 5차 함수의 굴절률 분포와 제안하는 구배형 굴절률 분포의 반사방지막 특성을 비교하였다. 분석에 사용된 반사방지막 구조는 각각 3, 6, 9층 구조로서 총 두께 180 nm 이고, 입사파의 파장 범위는 300 nm ~ 1100 nm 이다. 각 각 서로 다른 층수에서 반사율을 비교하기 위하여 단층인 경우의 전달매트릭스를 구하고 3, 6, 9층의 구조에서의 반사율을 구하였다. 그 결과 3층의 구조 일 때 제안하는 구배형 굴절률 분포가 약 600 nm ~ 1100 nm 파장 범위에서 5차 함수의 굴절률 분포보다 더 낮은 반사율을 보였다. 향후 이 결과는 가시광선(적색)과 근적외선 영역에 사용되는 광소자 및 광 필터에 응용 가능하리라 판단된다.

• 전자공학회논문지CI
• /
• 제48권5호
• /
• pp.16-23
• /
• 2011

Gunnery로부터 발생하는 muzzle firing은 매우 높은 에너지를 방출하는 표적으로 볼 수 있다. 따라서, xx km 이상의 원거리 gunnery의 경우 일반 CCD 영상으로는 식별하기 어렵지만, IR(infrared) 영상에서는 충분히 식별될 수 있다. 본 논문에서는 원거리 IR 영상으로부터 muzzle firing으로 발생되는 profile을 획득하여 분류하는 기법을 제안한다. IR 센서(infrared sensor)의 특성, 거리, 대기 상태 등에 따라 muzzle firing으로 발생하는 에너지는 서로 다른 양으로써 IR영상에 표현된다. 따라서, 단순히 IR 영상의 픽셀값으로 gunnery 종류를 분류하는데는 명확한 한계가 있다. 제안하는 기법에서는 xxx Hz 이상의 고속 장비를 이용하여 muzzle firing이 이루어지는 구간내에서 시간에 따른 픽셀값의 profile을 획득하여 형태기반의 특징을 추출한 후, 피셔 공간(Fisher's space)로 투영시켜 GMM(Gaussian Mixture Model)을 이용하여 gunnery의 종류를 분류한다. 제안하는 기법을 이용하여 지상 및 공중에서 획득한 gunnery에 대하여 분류 실험을 수행한 결과 파라미터에 따라 최대 93%의 분류율을 확인하였다.

• 한국음향학회지
• /
• 제34권4호
• /
• pp.264-273
• /
• 2015

본 논문에서는 의료용 초음파 트랜스듀서의 방사 빔 형상의 개선에 관하여 연구하였다. 빔 형상의 개선을 위하여 분할전극과 다초점 렌즈를 포함하는 새로운 트랜스듀서 구조를 고안하였다. 먼저 선형 음원에 대해 유한요소 해석을 통해 빔 형상을 분석한 후, 부엽의 크기, 집속구간 및 빔폭 등의 성능들을 동시에 고려하여 고안된 구조의 최적설계를 수행하였다. 이때 집속구간과 최소 빔폭의 비율을 성능지수로 사용하여 고안된 구조의 최적치수를 도출하였다. 그 결과 부엽의 크기가 -20.2 dB로 작고, 최소 빔폭이 2.04 mm이고 깊이 30 mm부터 160 mm까지 좁고 일정한 빔폭을 가지도록 빔 형상이 개선되었다. 나아가, 고안된 구조를 가지도록 트랜스듀서 시편을 제작하고 빔 패턴을 측정하여 해석 결과와 비교함으로써, 고안된 트랜스듀서 구조의 타당성을 검증하였다.

• 말소리와 음성과학
• /
• 제2권2호
• /
• pp.117-121
• /
• 2010

The This study aimed to evaluate the effects of the voice therapy we operated to the patients with age-related dysphonia. Thirty four participants who were diagnosed as age-related dysphonia in laryngoscopic finding from January, 2009 to December, 2009 completed the study. The participants were aged from 60 to 82 years old with a mean age of 70.6. All participants had received the abdominal breath technique, SKHPIP with laughter, and basic vocal training with description of their problem, the length of which ranged from four sessions to twelve sessions. We executed the videostroboscopy to compare the aspect of voicing change and the perceptual assessment, voice range profile, acoustic and aerodynamic measures to identify change of voice. Participants had glottal gap due to incomplete glottic closure during voicing on the pretest. After they took the voice therapy, the glottic gap became narrow and rough and breathy voice was reduced. There were significant difference in acoustic and aerodynamic measures. Jitter, Shimmer, MFR were reduced and MPT, Psub were increased(p<.05). Participants' pitch range and intensity range were increased on the posttest performance after taking voice therapy. Especially, most of them were showed that pitch range was increased significantly in high frequency area. The results of this investigation indicate that the voice therapy using abdominal breath, SKHPIP, and exercise together is effective for the patients who have age-related dysphonia to improve their voice quality. We recommend to apply this technique to functional voice disorders who are showed glottal gap.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.31.1-31.7
• /
• 2019

Background: To test the hypothesis that in profile smiling view, for ideal aesthetics, a tangent to the labial face of the maxillary central incisor crowns should be approximately parallel to the true vertical line and thereby perpendicular to the true horizontal line. Methods: An idealized female image was created with computer software and manipulated using the same software to construct an "ideal" female profile image with proportions, and linear and angular soft tissue measurements, based on currently accepted criteria for idealized Caucasian profiles. The maxillary incisor labial face tangent was altered in 5° increments from 70 to 120°, creating a range of images, shown in random order to 70 observers (56 lay people and 14 clinicians), who ranked the images from the most to the least attractive. The main outcome was the preference ranks of image attractiveness given by the observers. Results: The most attractive inclination of a tangent to the labial face of the maxillary incisor crowns in profile view in relation to the true horizontal line was 85°, i.e. 5° retroclined from a perpendicular 90° inclination. The most attractive range appears to be between 80 and 90°. Excessive proclination appeared to be less desirable than retroclination. Beyond 105° most observers recommend treatment. Conclusion: In natural head position, the ideal inclination of the maxillary incisor crown labial face tangent in profile view will be approximately parallel to the true vertical line and thereby approximately perpendicular to the true horizontal line.