Browse > Article
http://dx.doi.org/10.12989/gae.2014.7.4.459

CPT-based lateral displacement analysis using p-y method for offshore mono-piles in clays  

Kim, Garam (Department of Civil and Environmental Engineering, Yonsei University)
Park, Donggyu (Department of Civil and Environmental Engineering, Yonsei University)
Kyung, Doohyun (Department of Civil and Environmental Engineering, Yonsei University)
Lee, Junhwan (Department of Civil and Environmental Engineering, Yonsei University)
Publication Information
Geomechanics and Engineering / v.7, no.4, 2014 , pp. 459-475 More about this Journal
Abstract
In this study, a CPT-based p-y analysis method was proposed for the displacement analysis of laterally loaded piles. Key consideration was the continuous soil profiling capability of CPT and cone resistance profiles that do not require artificial assumption or simplification for input parameter selection. The focus is on the application into offshore mono-piles embedded in clays. The correlations of p-y function components to the effective cone resistance were proposed, which can fully utilize CPT measurements. A case example was selected from the literature and used to validate the proposed method. Various parametric studies were performed to examine the effectiveness of the proposed method and investigate the effect of property profile and its depth resolution on the p-y analysis. It was found that the calculation could be largely misleading if wrongly interpreted sub-layer condition or inappropriate resolution of input soil profile was involved in the analyses. It was also found that there is a significant influence depth that dominates overall load response of pile. The soil profile and properties within this depth range affect most significantly calculated load responses, confirming that the soil profile within this depth range should be identified in more detail.
Keywords
p-y analysis; cone penetration tests; laterally loaded piles; offshore wind turbines;
Citations & Related Records
연도 인용수 순위
  • Reference
1 DNV (2004), Det Norske Veritas, Design of Offshore Wind Turbine Structures, Offshore Standard, Norway.
2 API (2000), Recommended Practice for Planning, Designing and Construction Fixed Offshore Platforms-Working Stress Design, American Petroleum Institute, API Recommended Practice 2A-WSD (RP2AWSD), (21st Edition), Dallas, TX, USA.
3 Broms, B.B. (1964), "Lateral resistance of piles in cohesive soils", J. Soil Mech. Found. Div.-ASCE, 90(2), 27-63.
4 Briaud, J.L., Tucker, L., Lytton, R.L. and Coyle, H.M. (1985), "Behavior of piles and pile groups in cohesionless soils", Final Report, Report No. FHWA/RD-83/038, NTIS PB86-152089/AS.
5 Duncan, J., Evans, L. Jr. and Ooi, P. (1994), "Lateral load analysis of single piles and drilled shafts", J. Geotech. Eng., ASCE, 120(6), 1018-1033.   DOI   ScienceOn
6 Franke, K. and Rollins, K. (2013), "Simplified hybrid p-y spring model for liquefied soils", J. Geotech. Geoenviron. Eng., ASCE, 139(4), 564-576.   DOI
7 Gabr, M., Lunne, T. and Powell, J. (1994), "P-y analysis of laterally loaded piles in clay using DMT", J. Geotech. Eng., ASCE, 120(5), 816-837.   DOI
8 Haldar, S. and Babu, G.S. (2009), "Design of laterally loaded piles in clays based on cone penetration test data: A reliability-based approach", Geotechnique, 59(7), 593-607.   DOI
9 IEA (2008), World Energy Outlook 2008, International Energy Agency, Paris, France.
10 Ladd, C.C., Foot, R., Ishihara, K., Schlosser, F. and Poulos, H.G. (1977), "Stress-deformation and strength characteristics, state of the art report", Proceedings of the 9th ISMFE, Tokyo, Vol. 4, pp. 421-494.
11 Lunne, T., Randolph, M.F., Chung, S.F., Anderson, K.H. and Sjursen, M.A. (2005), "Comparison of cone T-bar factors in two onshore and one offshore clay sediments", Proceedings of the 1st Intnernational Symposium on Frontiers in Offshore Geotechnics, Perth, WA, USA, September, pp. 981-989.
12 Lee, J., Kim, M. and Kyung, D. (2010), "Estimation of lateral load capacity of rigid short piles in sands using CPT results", J. Geotech. Geoenviron. Eng., ASCE, 136(1), 48-56.   DOI
13 Lee, J. and Randolph, M. (2011), "Penetrometer-based assessment of spudcan penetration resistance", J. Geotech. Geoenviron. Eng., ASCE, 137(6), 587-596.   DOI
14 Reese, L.C., Cox, W.R. and Koop, F.D. (1975), "Field testing and analysis of laterally loaded piles in stiff clay", Proceedings of Offshore Technology Conference, Houston, TX, USA, May, pp. 671-690.
15 Lee, J., Seo K., Kang, B., Cho, S. and Kim, C. (2010), "Application of effective cone factor for strength characterization of saturated clays", Proceedings of GeoFlorida 2010 (Advances in analysis, modeling and design), West Palm Beach, FL, USA, February.
16 Matlock, H. (1970), "Correlation for design of laterally loaded piles in soft clay", The 2nd Annual Offshore Technology Conference, Houston, TX, USA, April, pp. 577-607.
17 Murchison, J.M. and O'Neill, M.W. (1984), "Evaluation of p-y relationships in cohesionless soils", Anal. Des. Pile Found., ASCE, 174-191.
18 Reese, L.C., Wang, S.T., Isenhower, W.M., Arrellaga, J.A. and Hendrix, J. (2004), Computer Program: LPILE Version 5 Technical Manual, Ensoft Inc., Austin, TX, USA.
19 Robertson, P.K., Davis, M.P. and Campanella, R.G. (1989), "Design oflaterally loaded driven piles using the flat dilatometer", Geotech. Test. J., 12(1), 30-38.   DOI
20 Rollins, K., Peterson, K. and Weaver, T. (1998), "Lateral load behavior of full-scale pile group in clay", J. Geotech. Geoenviron. Eng., ASCE, 124(6), 468-478.   DOI   ScienceOn
21 Rollins, K.M., Johnson, S.R., Petersen, K.T. and Weaver, T.J. (2003), "Static and dynamic lateral load behavior of pile groups based on full-scale testing", Proceedings of the 13th International Offshore and Polar Engineering Conference, Honolulu, Hawaii, USA, May.
22 Schnaid, F. and Houlsby, G.T. (1991), "An assessment of chamber size effects in the calibration of in situ tests in sand", Geotechnique, 41(3), 437-445.   DOI
23 Titi, H.H., Mohammad, L.N. and Tumay, M.T. (2000), "Miniature cone penetration tests in soft and stiff clays", Geotech. Test. J., ASTM, 23(4), 432-443.   DOI   ScienceOn
24 Skempton, A.W. (1951), "The bearing capacity of clays", Proceedings, Building Research Congress, Division 1, London, England, pp.180-189.
25 Stewart, D. and Randolph, M. (1994), "T-bar penetration testing in soft clay", J. Geotech. Eng., ASCE, 120(12), 2230-2235.   DOI
26 Teh, C.I. and Houlsby, G.T. (1991), "An analytical study of the cone penetration test in clay", Geotechnique, 41(1), 17-34.   DOI
27 Tumay, M.T. and Kurup, P.U. (2001), "Development of a continuous intrusion miniature cone penetration test system for subsurface explorations", Soil. Found., 41(6), 129-138.
28 Zhang, L., Silva, F. and Grismala, R. (2005), "Ultimate lateral resistance to piles in cohesionless soils", J. Geotech. Geoenviron. Eng., ASCE, 131(1), 78-83.   DOI   ScienceOn