• 대한전자공학회논문지SD
• /
• 제46권8호
• /
• pp.95-101
• /
• 2009

난수 생성 함수는 소프트웨어를 사용한 시뮬레이션 테스트나 통신 프로토콜 검증 등 수많은 어플리케이션에 사용되어진다. 이런 상황에서 난수의 randomness는 사용 어플리케이션에 따라서 다르게 필요할 수 있다. 반드시 randomness가 보장된 랜덤 함수를 통한 고품질의 난수를 생성해야 할 때가 있고, 단지 난수와 비슷한 형태를 가진, randomness가 보장되지 않은 난수가 필요할 때도 있다. 본 논문에서는 고속으로 동작하는 임베디드 시스템을 위한 듀얼 모드로 동작하는 하드웨어 난수 생성기를 제안하였다. 모드 1 에서는 높은 randomness를 가지는 난수를 6사이클마다 한 번씩 생성하게 되며, 모드 2 에서는 낮은 randomness를 가지는 난수를 매 사이클마다 생성할 수 있다. 테스트를 위해, ASIP(Application Specific Instruction set Processor)를 설계하였으며, 각 모드에 맞는 명령어 세트를 설계하였다. ASIP은 LISA언어를 사용하여, 5 stage MIPS architecture를 기반으로 설계되었고, CoWare 사의 Processor Generator를 통해서 HDL코드를 생성하였으며, HDL 모델은 동부 0.18um 공정으로 Synopsys사의 Design Compiler를 통해서 합성되었다. 설계되어진 ASIP으로 난수를 생성한 결과, 하드웨어 모듈을 추가하기 전에 비해 2.0%의 면적 증가 및 239%의 성능 향상을 보였다.

• 천문학회보
• /
• 제41권1호
• /
• pp.38.2-38.2
• /
• 2016

The mapping of dark matter clustering from real to redshift spaces introduces the anisotropic property to the measured density power spectrum in redshift space, known as the Redshift Space Distortion (hereafter RSD) effect. The mapping formula is intrinsically non-linear, which is complicated by the higher order polynomials due to the indefinite cross correlations between the density and velocity fields, and the Finger-of-God (hereafter FoG) effect due to the randomness of the peculiar velocity field. Furthermore, the rigorous test of this mapping formula is contaminated by the unknown non-linearity of the density and velocity fields, including their auto- and cross-correlations, for calculating which our theoretical calculation breaks down beyond some scales. Whilst the full higher order polynomials remains unknown, the other systematics can be controlled consistently within the same order truncation in the expansion of the mapping formula, as shown in this paper. The systematic due to the unknown non-linear density and velocity fields is removed by separately measuring all terms in the expansion using simulations. The uncertainty caused by the velocity randomness is controlled by splitting the FoG term into two pieces, 1) the non-local FoG term being independent of the separation vector between two different points, and 2) the local FoG term appearing as an indefinite polynomials which is expanded in the same order as all other perturbative polynomials. Using 100 realizations of simulations, we find that the best fitted non-local FoG function is Gaussian, with only one scale-independent free parameter, and that our new mapping formulation accurately reproduces the observed power spectrum in redshift space at the smallest scales by far, up to k ~ 0.3 h/Mpc, considering the resolution of future experiments.

• 한국자동차공학회논문집
• /
• 제20권6호
• /
• pp.100-106
• /
• 2012

Recently, the demand to acquire and improve durability performance has steadily risen in rubber components design. In design process of a rubber component, an analytical prediction is the most effective way to improve fatigue life. Existing methods of analytical estimation have mainly used an equation for fatigue life obtained from fatigue test data. However, such formula is rarely used due to costs and time required for fatigue testing, as well as randomness of rubber materials. In this paper, we describe fatigue life estimation of rubber component using only the results from a relatively simple tearing test. We estimated fatigue life of the Janggu type fatigue specimen and the automotive motor mount, and evaluated reliability of the proposed method by comparing the estimated values with actual test results.

• 한국해안·해양공학회논문집
• /
• 제32권1호
• /
• pp.26-38
• /
• 2020

설계파고 추정에 사용한 AM 자료의 IID 가정에 대한 검정을 수행하였다. 검정은 독립 검정, 분포 차이 검정으로 구분하고, 각각의 검정은 태풍, 비태풍 조건에서의 연안 격자, 연안 내부격자 각각 210개, 310개 지점의 AM 자료 세트를 대상으로 수행하였다. 독립 검정 결과, 비태풍, 태풍 자료 세트에 대하여 각각 1.8~5.3%, 1.4~6.0% 범위의 기각 비율을 보여, 대부분의 자료가 독립 검정을 만족하는 것으로 파악되었다. 한편 태풍 자료와 비태풍 자료의 분포 차이 검정은 연안 격자와 연안 내부격자 모두 검정 방법에 따라 47~79% 범위로 동일분포 가설이 기각되는 것으로 파악되었다. 따라서 극치해석에 의한 설계파고 추정에서 두 자료를 구분하여 각각 설계파고를 추정하는 과정이 적절하다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전력기술부문
• /
• pp.16-18
• /
• 2008

Because of being environmentally friendly, renewable energy resources has been growing at a high rate. Wind energy is one of the most successfully utilized of such sources for producing electrical energy. Due to the randomness of wind speed, wind farms can not supply power with a balanceable level as well as conventional power plants. The reliability evaluation of wind power is more and more important. Capacity credit is used to estimate the capacity credit of power systems including wind farms. This paper presents a method of capacity credit calculation for a power system considered wind farms and shows how it gets study on an actual power system (the Jeju Island power system). The paper describes the step of capacity credit calculation and presents test results, which indicate its effectiveness.

• 정보처리학회논문지D
• /
• 제10D권3호
• /
• pp.541-546
• /
• 2003

본 논문에서는 디지털 지문 이미지를 잡음원으로 하는 난수 생성기를 제안한다. 생체 정보를 잡음원으로 하는 난수 생성기는 아직까지 세계적으로 제안되지 않고 있다. 제안한 난수 생성기는 한 지문에 대하여 평균 9,334 비트를 0.03초에 생성하며, 생성된 비트 열은 NIST에서 권장한 16개의 난수성 통계 검증들을 모두 통과하였다.

• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.575-584
• /
• 2016

Considering the randomness and uncertainty of wind power, a reliability model of WTGs is established based on the combination of the Weibull distribution and the Markov chain. To analyze the failure mode quickly, we use the switch-section partitioning method. After defining the first-level load zone node, we can obtain the supply power sets of the first-level load zone nodes with each WTG. Based on the supply sets, we propose the dynamic division strategy of island operation. By adopting the fault analysis method with the attributes defined in the switch-section, we evaluate the reliability of the distribution network with WTGs using a sequential Monte Carlo simulation method. Finally, using the IEEE RBTS Bus6 test system, we demonstrate the efficacy of the proposed model and method by comparing different schemes to access the WTGs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.924-926
• /
• 1997

A high impedance fault(HIF) in a power system could be due to a downed conductor, and is a dangerous situation because the current may be too small to be detected by conventional means. In this paper, HIF(High impedance fault) and LIF(Low impedance fault) detection methods were reviewed. No single defection method can detect all electrical conditions resulting from downed conductor faults, because high impedance fault have arc phenomena, asymmetry and randomness. Neural network are well-suited for solving difficult signal processing and pattern recognition problem. This paper presents the application of artificial neural network(ANN) to detect the HIF and LIF. Test results show that the neural network was able to identify the high impedance fault by real-time operation. Furthermore, neural network was able to discriminate the HIF from the LIF.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권12호
• /
• pp.6161-6176
• /
• 2018

Pseudorandom numbers are useful in cryptographic operations for using as nonce, initial vector, secret key, etc. Security of the cryptosystem relies on the secret key parameters, so a good pseudorandom number is needed. In this paper, we have proposed a new approach for generation of pseudorandom number. This method uses the three dimensional combinational puzzle Rubik Cube for generation of random numbers. The number of possible combinations of the cube approximates to 43 quintillion. The large possible combination of the cube increases the complexity of brute force attack on the generator. The generator uses cryptographic hash function. Chaotic map is being employed for increasing random behavior. The pseudorandom sequence generated can be used for cryptographic applications. The generated sequences are tested for randomness using NIST Statistical Test Suite and other testing methods. The result of the tests and analysis proves that the generated sequences are random.

• Steel and Composite Structures
• /
• 제3권3호
• /
• pp.185-198
• /
• 2003

The concept of performance based seismic design has been gradually accepted by the earthquake engineering profession recently, in which the cost-effectiveness criterion is one of the most important principles and more attention is paid to the structural performance at the inelastic stage. Since there are many uncertainties in seismic design, reliability analysis is a major task in performance based seismic design. However, structural reliability analysis may be very costly and time consuming because the limit state function is usually a highly nonlinear implicit function with respect to the basic design variables, especially for the complex large-scale structures for dynamic and nonlinear analysis. Understanding statistical properties of the structural inelastic deformation, which is the aim of the present paper, is helpful to develop an efficient approximate approach of reliability analysis. The present paper studies the statistical properties of the maximum elastoplastic story drift of steel frames subjected to earthquake load. The randomness of earthquake load, dead load, live load, steel elastic modulus, yield strength and structural member dimensions are considered. Possible probability distributions for the maximum story are evaluated using K-S test. The results show that the choice of the probability distribution for the maximum elastoplastic story drift of steel frames is related to the mean value of the maximum elastoplastic story drift. When the mean drift is small (less than 0.3%), an extreme value type I distribution is the best choice. However, for large drifts (more than 0.35%), an extreme value type II distribution is best.