• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.60-67
• /
• 2001

The microscopic characteristics and cellulose structures of primary and secondary tissues in Pinus densiflora S. et Z. were examined. Cells of primary tissue in cross section showed an irregular arrangement and round shape. Fiber lengths were 200 to $250{\mu}m$ in primary tissue, and 1,500 to $1,600{\mu}m$ in secondary tissue. Cell diameters in primary tissue were larger than those in secondary tissue; 40 to $50{\mu}m$ in former and 10 to $20{\mu}m$ in latter. Crystallite width and d-spacing of (200) in both tissues did not show any significant differences. However, crystallinity indices by Segal's method showed significant differences as 23% in primary tissue and 35% in secondary tissue. In the orientation of cellulose microfibril, primary tissues had a random pattern, whereas, secondary tissues presented an oriented pattern with 20 to 30 degree. The cellulose crystalline of primary tissue was easily transformed into cellulose II by mercerization, but that of secondary tissue hardly transformed. It is considered that the difference of crystal transformation in both tissues could be caused by the difference of lignification.

• Journal of Digital Convergence
• /
• v.16 no.4
• /
• pp.95-105
• /
• 2018

This study empirically test the roles of network closure and structural hole on radical innovation in technological knowledge exchange network in Gumi cluster. In doing so, we build 2,550 firm network, transforming association*firm(2-mode) to firm*firm(1-mode) network data. In addition, in order to investigate firms' attributes, we conduct survey for 101 firms in Gumi cluster using random sampling, and finally collect 86 firm samples. For analysis, we use ridge regression since network density and efficiency, indices of network closure and structural hole respectively, has a high level of multicollinearity. The findings show that structural hole has a significant and positive impact on radical innovation, but network closure has a significant and negative impact on radical innovation. This study contributes to present an empirical evidence of debate on network closure and structural hole based on past conceptual discussions and literature review and further goes a long way towards strategy formulation to establish social capital in accomplishing radical innovation. Further research is required that pays closer attention to features of technological knowledge, innovation types and interaction between network closure and structural hole, directing efforts to structural characteristics of various networks.

• Korean journal of applied entomology
• /
• v.58 no.4
• /
• pp.291-297
• /
• 2019

Since Metcalfa pruinosa was first reported in Koera, it has continually caused damage to sweet persimmon orchard in southern part of Korea. Metcafa pruinosa exist not only in farmland but also in forest areas, and are difficult to control due to the influx of individuals from near forest. M. pruinosa has been occurred in orchard and its surroundings because of various host range. Thus, it has been difficult to decide spatial range and control time for efficient management. In this study, occurrence and dispersal pattern of M. pruinosa in persimmon orchard were surveyed using clear sticky traps, and spatial patterns were analyzed with SADIE(Spatial Analysis by Distance IndicEs), based on location information at sticky traps. Spatial association between survey time was also analyzed to identify when the spatial pattern changed. In sweet persimmon orchard, M. pruinosa mainly dispersed in mid to late May, when the first instar hatches, and in August, emerging season of adult. The first instar nymphs hatched in mid-May were randomly distributed in orchard, but distribution was changed to aggregative pattern after dispersed surroundings of orchard. Adults showed random distribution pattern after immigration to orchard again. These tendency was also observed in density change at orchard and its surroundings, and matched to actual density of M. pruinosa in sweet persimmon trees.

• Korean Journal of Health Education and Promotion
• /
• v.13 no.1
• /
• pp.128-162
• /
• 1996

Using Random Sampling, the authors measured the body heights and weights of 31,151 persons - 17,102 in males and 14,049 in females from metropolitan, urban and rural areas between 6 to over 80 year old - for the purpose of investigating the type and the actual condition of the Korean's growth and development. At first, on the basis of the results, the authors measured the growth and development, various kinds of physiques, nutritional index of the 6 to 20s age group. Second, the authors presented the standard body weight of males and females by their body height, who were in the end of their growth (20-29 age group). Third, the authors calculated and presented the normal adapted body weight of the age group who were over 30 age after the growth had been completed. Forth, the author presented the obesity rate of the adults over 20 years old by body mass index. Finally, the authors compared chronological change of the Koreans' body heights and body weights with the results of other researchers. 1. Body Measurement Rapid growth, in terms of body height, which is described by a straight line on a growth curve has been observed among males in the ages 6-13 and among females 6-14. That growth curve turned out to be slower among the people of higher ages by both sexes. The cross-over occurred in both sexes at 11-14. The highest growth rate for a year is at 13-16 for males and 11-13 for females. This indicates that females enter a rapidly growing stage 2 years earlier than males. 2. Various Physiques and Nutritional Index Rapid growth, in terms of Relative Body Weight Index, which is described by a straight line, has been observed among males in the ages 6-16 and females in the ages 6-14. The cross-over occurred in both sexes 12.5-14.5 age in the adolescencent period. Whereupon females outgrow males. The Roher Index displayed more good value in case of females than male and in the adolescent period, the level of fullness is lower than after the completion of development. The Kaup Indices of both sexes increase with age. The index is less than 2.0 for males in 6-14 age group and for females in 6-13 age group and with this, it appeared that development of horizontal axis to long axis is poor. The index is more than 2.0 after 15 age group in males and 14 age group in females and developmental state4 age group and for females in 6-13 age group and with this, it appeared that development of horizontal axis to long axis is poor. The index is more than 2.0 after 15 age group in males and 14 age group in females and developmental state Body Mass Index is less than 20 for males 6-14 age group and for females in 6-13 age group. In the case of the higher age group, that index maintains a normal state.

• Journal of Biomedical Engineering Research
• /
• v.23 no.2
• /
• pp.109-117
• /
• 2002

Electrogastrography(EGG) is a noninvasive method for measuring gastric electrical activity on the abdomen resulting from gastric muscle. EGG signals have a very low frequency range (0.0083 ~0.15 Hz) and extremely low amplitude(10~100 uV). Consequently, EGG signal is easily influenced by other noises. Both finite impulse response(FIR) and infinite impulse response (IIR) filters need high orders or have phase distortions for passing very narrow bandwidth of the EGG signal. In this study, we decomposed EGG signals using a wavelet multiresolution method with Daubechies mother wavelet. The EGG signals were decomposed to seven levels. We reconstructed signal by summing the decomposed signals from level four to seven. To evaluate the performance of the wavelet multiresolution filter(WMF) with simulated EGG signal using two kinds of FIR and four kinds of IIR filters., we used two indices; signal to noise ratio(SNR) and reconstruction squared error(RSE). The SNR of WMF had 9.5, 6.9, and 4.7 dB bigger than that of the other filters at different noise levels, respectively. Also, The RSE of WMF had $1.22{\times}10^6, 1.16{\times}10^6, 1.02{\times}10^6$ smaller than that of the other filters at different noise levels, respectively. The WMF performed better in the SNR and RSE than two kinds of FIR and four kinds of IIR filters.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.6
• /
• pp.723-730
• /
• 2008

Due to the higher ratio of live load to total loads of railway bridges, the accumulated damage by cyclic fatigue is significant. Moreover, it is highly possible that the initiated crack grows faster than that of highway bridges. Therefore, it is strongly needed to assess the safety for the accumulated damage analytically. The initiation and growth of fatigue-crack are related with the stress range, number of cycles, and the stiffness of the structural system. The stiffness of the structural system includes uncertainties of the planning, design, construction and maintenance, which varies as time goes. In this study, the authors developed the design and risk assessment techniques based on the reliability theories considering the uncertainties in load and resistance. For the probabilistic risk assessment of crack growth and the remaining life of the structures by the cyclic load of railway and subway bridges, response surface method (RSM) combined with first order second moment method were used. For composing limit state function, the stress range, stress intensity factor and the remaining life were selected as input important random variables to the RSM program. The probabilities of failure and the reliability indices of fatigue life for the considered specimen under cyclic loads were evaluated and discussed.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.439-445
• /
• 2004

Diffusion tensor image(DTI) exploits the random diffusional motion of water molecules. This method is useful for the characterization of the architecture of tissues. In some tissues, such as muscle or cerebral white matter, cellular arrangement shows a strongly preferred direction of water diffusion, i.e., the diffusion is anisotropic. The degree of anisotropy is often represented using diffusion anisotropy indices (relative anisotropy(RA), fractional anisotropy(FA), volume ratio(VR)). In this study, FA images were obtained using different gradient schemes(N=6, 11, 23, 35. 47). Mean values and the standard deviations of FA were then measured at several anatomic locations for each scheme. The results showed that both mean values and the standard deviations of FA were decreased as the number of gradient directions were increased. Also, the standard error of ADC measurement decreased as the number of diffusion gradient directions increased. In conclusion, different gradient schemes showed a significantly different noise performance and the schem with more gradient directions clearly improved the quality of the FA images. But considering acquisition time of image and standard deviation of FA, 23 gradient directions is clinically optimal.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.1
• /
• pp.21-31
• /
• 2008

response surface method (RSM) is widely used to evaluate th e extremely smal probability of ocurence or toanalyze the reliability of very complicated structures. Althoug h Monte-Carlo Simulation (MCS) technique can evaluate any system, the procesing time of MCS dependson the reciprocal num ber of the probability of failure. The stochastic finite element method could solve thislimitation. However, it is limit ed to the specific program, in which the mean and coeficient o f random variables are programed by a perturbation or by a weigh ted integral method. Therefore, it is not aplicable when erequisite programing. In a few number of stage analyses, RSM can construct a regresion model from the response of the c omplicated structural system, thus, saving time and efort significantly. However, the acuracy of RSM depends on the dist ance of the axial points and on the linearity of the limit stat e functions. To improve the convergence in exact solution regardl es of the linearity limit of state functions, an improved adaptive response surface method is developed. The analyzed res ults have ben verified using linear and quadratic forms of response surface functions in two examples. As a result, the be st combination of the improved RSM techniques is determined and programed in a numerical code. The developed linear adapti ve weighted response surface method (LAW-RSM) shows the closest converged reliability indices, compared with quadratic form or non-adaptive or non-weighted RSMs.

• Journal of Life Science
• /
• v.17 no.3 s.83
• /
• pp.328-333
• /
• 2007

Genetic diversity and population structure of eleven Liriope platyphylla (Liliaceae) populations in Korea were determined using genetic variation at 20 allozyme loci. The percent of polymorphic loci within the enzymes was 55.9%. Genetic diversity at the species level and at the population level was high(Hes = 0.178; Hep = 0.168, respectively), whereas the extent of the population divergence was relatively low ($G_{ST}$ = 0.064). $F_{IS}$, a measure of the deviation from random mating within the 11 populations, was 0.311. Total genetic diversity values ($H_T$) varied between 0.0 and 0.535, giving an average over all polymorphic loci of 0.323. The interlocus variation in within population genetic diversity ($H_S$) was high (0.305). An indirect estimate of the number of migrants per generation (Nm = 3.66) indicates that gene flow is high among Korean populations of the species. In addition, analysis of fixation indices revealed a substantial heterozygosity deficiency in some populations and at some loci. Mean genetic identity between populations was 0.988. It is highly probable that directional toward genetic uniformity in a relatively the homogenous habitat is thought to be operated among Korean populations of L. platyphylla.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_3
• /
• pp.2027-2034
• /
• 2021

Using multi-temporal KOMPSAT-3/3A high-resolution satellite images, the Normalized Difference Vegetation Index (NDVI) for the area around the Fukushima daiichi nuclear power plant was determined, and the pattern of vegetation changes was analyzed. To calculate the NDVI, surface reflectance from the KOMPSAT-3/3A satellite image was used. Satellite images from four years were used, and the zones where the images overlap was designated as the area of interest (AOI) for the study, and by setting a profile passing through highly vegetated area as a data analysis method, the changes by year were examined. In addition, random points were extracted within the AOI and displayed as a box plot to quantitatively indicate change of NDVI distribution pattern. The main results of this study showed that the NDVI in 2014 was low within AOI in the vicinity of the nuclear power plant, but vegetated area continued to expand until 2021. These results were also confirmed in the change monitoring results shown in a profile or box plot. In disaster areas where access is restricted, such as the Fukushima nuclear power plant area, where it is difficult to collect field data, obtaining land cover classification products with high accuracy using satellite images is challenging, so it is appropriate to analyze them using primary outputs such as vegetation indices obtained from high-resolution satellite imagery. It is necessary to establish an international cooperation system for jointly utilizing satellite images. Meanwhile, to periodically monitor environmental changes in neighboring countries that may affect the Korean peninsula, it is necessary to establish utilization models and systems using high-resolution satellite images.