• Korean Journal of Materials Research
• /
• v.8 no.3
• /
• pp.263-267
• /
• 1998

In this study, we have fabricated in-situ multilayer $YBa_2Cu_3O_{7-\delta}$/$SrTiO_{3}$/$YBa_2Cu_3O_{7-\delta}$ ramp edge type junctions by using a metal mask and pulsed laser deposition method and studied the junction properties. The junctions showed RSJ-like I-V characteristics. The normal state junction resistance R, of $18 \omega$ was nearly constant with temperature. The dc-SQUID sensors fabricated with the junctions show a sensitivity that transfer function dV/$d\Phi$)~$22\mu$V/$\Phi_{0}$, indicating that the in-situ ramp edge type junction is potentially useful for sensor application.

• Journal of Embryo Transfer
• /
• v.16 no.2
• /
• pp.133-138
• /
• 2001

The aim of this study was to identify the method on extended canine semen exposed to freezing as assessed by motility, survival and acrosomal changes following different freezing ramp rates. Five ejaculates collected by digital manipulation twice weekly from three dogs (Shih-Tzu) were added Tris-Egg Yolk (TE) buffer and divided into 4 aliquots according to formulation of our laboratory. After cooling to 4$^{\circ}C$ by ramp rate of 0.6$^{\circ}C$/min, the samples frozen by ramp rates of 1.6$^{\circ}C$/min to -$25^{\circ}C$, 3$^{\circ}C$/min to -35$^{\circ}C$, 8.9$^{\circ}C$/min to -7$0^{\circ}C$ and 19$^{\circ}C$/min to -11$0^{\circ}C$, respectively, and then stored in L$N_2$for 2days. Each sample was evaluated on their motility, survivability and acrosome integrity at different thawing temperature. The ramp rate of 3$^{\circ}C$/min to -35$^{\circ}C$/h for freezing and thawing temperature of 37$^{\circ}C$ obtained the highest results to improve survivability, motile spermatozoa and intact acrosome appearance than other onditions. In conclusion, we may suggest freezing semen for canine artificial insemination is more efficient with freezing at a ramp rate of -3$^{\circ}C$/min to -35$^{\circ}C$ and thawing with a water bath adjusted to 37$^{\circ}C$.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.975-977
• /
• 2014

Recently, As portability of storage device has been increased, it is important to analyze the precise anti-shock analysis. For non-operational shock analysis, the accuracy of non-operational shock simulation has been improved. However, because operational shock analysis includes nonlinear process, it is hard to get clear result from operational shock simulation. In this paper, by using Lagrange multiplier method, the FE model including ramp-disk contact of nonlinear process will be analyzed. Through this, we find ramp-disk contact affect the dynamic of slider. Additionally, for the more accurate analysis, we should include ramp-disk contact process at the FE model.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.573-576
• /
• 2004

This paper proposes an analytic method that can estimate delay time considering crosstalk noise at an arbitrary node of RC-class interconnects under saturated ramp input using a simple closed-form expression. In the case of single interconnects, algebraic expression presented in existent research can estimate delay time under ramp input using delay time under step input, and we applied it to estimate delay time considering crosstalk noise. As the result, we can provide a intuitive analysis about signal integrity of circuits that include crosstalk noise reducing computational complexity significantly.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2001.02a
• /
• pp.145-148
• /
• 2001

Bi-2223/Ag HTS tapes fabricated by PIT process are used to make the power transmission cable, motor, fault current limiter, transformer etc. But some problems are still remained as like bubbling, sausaging to got the high Jc. In this study. we carried out the experiment to prevent bubbling in the HTS tape. The bubbling mainly occurred when HTS tape was heat-treating. Therefore, additional vacuum annealing at 400 ~ $600^{\circ}C$and slowly ramp-up sintering method were used to decrease the bubbling. slowly ramp-up sintering was more effective to decrease the bubbling than the vacuum annealing, but Jc was also decreased after heat treatment. Optimum ramp-up sintering schedule was searched to get the high critical current and prevent bubbling at same time.

• International Journal of Reliability and Applications
• /
• v.18 no.2
• /
• pp.45-63
• /
• 2017

In this paper, we have formulated optimum Accelerated Life Test (ALT) plan for a parallel system with two independent components using masked data with ramp-stress loading scheme and Type-I censoring. Consider a system of two independent and non-identical components connected in parallel. Such a system fails whenever all of its components has failed. The exact component that causes the system to fail is often unknown due to cost and time constraint. For each parallel system at test, we observe its system's failure time and a set of component that includes the component actually causing the system to fail. The stress-life relationship is modelled using inverse power law, and cumulative exposure model is assumed to model the effect of changing stress. The optimal plan consists in finding out the optimum stress rate using D-optimality criterion. The method developed has been explained using a numerical example and sensitivity analysis carried out.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05a
• /
• pp.26-29
• /
• 2002

The ramp waveform has recently been introduced to erase wall charges of the previously selected cells for plasma display. However. the ramp waveform can't completely remove wall charges. In this paper. we suggested new erase waveform having a complex with close width pulse and ramp pulse for complete erasing. The erasing margin of suggested waveform is wider than the conventional waveform. Moreover. suggested wave form can reduce the erasing time compared.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.134-139
• /
• 1994

In this paper the comparison between the neural networks and traditional approaches as system identification method are considered. Two model structures of neural networks are the state space model and the input output model neural networks. The traditional methods are the AutoRegressive eXogeneous Input model and the Nonlinear AutoRegressive eXogeneous Input model. The examples considered do not represent any physical system, no a priori knowledge concerning their structure has been used in the identification process. Testing inputs for comparison are the sinusoidal, ramp and the noise ramp.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.140-140
• /
• 2004

마이크로 기술을 대변하는 Micro-Electro-Mechanical-Systems (MEMS)와 반도체, 각종 micro-sensor 및 actuator 등은 실리콘 위에 박막 코팅한 재료를 주로 사용하고 있다. 따라서 1 Um 이하의 박막코팅에 의해 원하는 성능을 얻으려는 시도가 널리 진행되고 있다 Hard Disk Drive (HDD)의 Head-Disk Interface (HDI)와 MEMS 접촉면에서는 발생하는 마찰 및 마멸에 대한 문제 등은 중요한 고려대상이다. 특히 코팅 층의 표면 파손 현상은 코팅 층의 파손 특성과 코팅 층과 기판 사이의 결합상태가 큰 영향을 미친다.(중략)

• Current Optics and Photonics
• /
• v.2 no.1
• /
• pp.7-14
• /
• 2018

As a sophisticated detection technology, LIDAR has been widely employed to probe low-altitude windshear. Due to the drawbacks of the traditional ramp algorithm, the alarm accuracy of the LIDAR has not been satisfactory. Aiming at settling this matter, a novel method is proposed on the basis of improved signal smoothing and second windshear detection, which essentially acts as a combination of ramp algorithm and segmentation approach, involving the human factor as well as signal fluctuations. Experiments on the real and artificial signals verify our approach.