• 대한전자공학회논문지TC
• /
• 제44권2호
• /
• pp.62-68
• /
• 2007

본 논문에서는 메모리와 곱셈기가 내장된 고속 FPGA(Field Programmable Gate Array)에서 효율적으로 구현할 수 있는 정수 나눗셈 알고리즘을 제안하였다. 제안된 알고리즘은 메모리를 이용한 Look-up Table(LUT)과 곱셈기를 사용하여 반복 계산(Iteration)구조로 FPGA의 자원을 최소화할 수 있으며 반복연산 횟수가 일반적으로 알려진 뺄셈 또는 뺄셈-곱셈에 의한 나눗셈 알고리즘에 비해 매우 적어 Latency를 최소화 할 수 있다. Xilinx사의 Virtex-4 FPGA에 VHDL coding을 통해 Pipeline구조로 구현한 결과 17bit의 정수 나눗셈을 300MSPS( Mega Sample per Second)의 속도로 수행하였다. 또한 일반적으로 사용되고 있는 뺄셈 또는 뺄셈-곱셈 구조에 비해 FPGA의 소요자원인 Slices의 경우 1/6이하, 곱셈기-누산기 수는 1/4이하로 줄일 수 있었으며, 입출력 간의 지연 Latency를 1/3이하로 줄일 수 있어 다른 알고리즘에 비해 매우 효율적인 구조임을 확인하였다.

• 한국기계가공학회지
• /
• 제14권1호
• /
• pp.70-77
• /
• 2015

This paper develops and evaluates a mechanical machining process which involves drilling on PVS material. According to the material, two treatment experiments were conducted, one involving drilling in a wet condition or using a lubricant and one involving drilling in a dry condition with no lubricant. Drilling in a dry condition showed better performance in terms of the cutting time than in the wet condition. Otherwise, the wet condition has several advantages. The lubricant influenced the burr diameter size and minimized the temperature on the surface of the work piece. During the wet condition drilling process, a smaller burr diameter size was noted as compared to the dry condition. The temperature showed a linear correlation with the drill bit size, where a least-square analysis provided an $R^2$valuewhichexceeded 0.95. The wet condition required more cutting time than the dry condition. In this condition, the water provides a lubrication effect. A thin layer between the cutting edges and the surface of the work piece is formed. The chip formation is affected by the drilling depth. The color on the tips of the chips was darker than in the initial condition. No correlation between the drilling depth and the bore roughness was noted, but the variation of the cutting speed or the RPM influenced the roughness of the bore. The optimum cutting speed ranged from 40 RPM to 45 RPM in the condition which provided the finest roughness surface.

• 한국생산제조학회지
• /
• 제19권2호
• /
• pp.163-170
• /
• 2010

We have studied on welding dissimilar materials of cold-reduced carbon steel sheet and stainless steel sheet together by using laser beam. It is well known that stainless steel is so strong againt rust and heat, while cold-reduced carbon steel is widely used in various parts of industry. In this research we have performed some experiments to know the possibility of welding dissimilar materials using laser beam by adjusting the power output of 3kW laser. Other conditions of the experiments were as follows : the welding speed was varied in the range between 2m/min and 7m/min, argon gas and helium gas were used as shield gas, the flow value of shield gas was ranged between $10{\ell}/min$ and $30{\ell}/min$, and the gap of two materials was ranged between 0mm and 0.3mm. In order to ascertain of the welded surface, we have done the tensile strength testing, the hardness testing and the microscope observation. As a result, we have found that tensile strength was the highest at the condition of the welding speed of 4, the flow value of $20{\ell}/min$, the gap of two materials 0, and the use of helium gas. Above testings have also showed that the tensile strength was generally satisfactory since the penetration of welding was almost complete due to the thinness of the materials. In addition, the formation of the welded area was excellent when it had the highest tensile strength.

• 자원리싸이클링
• /
• 제23권5호
• /
• pp.36-43
• /
• 2014

광물찌꺼기에는 다양한 종류의 중금속이 함유되어 있어, 국내외에서 광물찌꺼기로부터 중금속을 제거하기 위해 많은 연구가 이루어졌으나, 중금속을 제거하기에는 여러 가지 문제점과 제약이 따르기 때문에 한계가 있었다. 따라서 이를 해결하고자 본 연구에서는 미립자의 선별까지도 가능한 다중비중선별기(Multi-gravity separator, MGS)를 사용하여 광물찌꺼기에 함유된 비소를 제거하기 위한 비중선별실험을 수행하였다. MGS를 이용하여 비중선별에 의해 비중이 높은 비소를 함유한 광물을 제거하고자 경사각, 세척수량, 광액농도, 드럼의 회전속도, 급광량에 따른 영향을 확인하였다. 실험결과 최적실험 조건인 MGS의 경사각 $3^{\circ}$, 세척수량 5 l/min., 광액농도 30%, 드럼 회전속도 208 rpm, 그리고 급광량 265.24 g/min. 에서 As 제거율과 산출율이 각각 88.21%와 92.25%인 결과를 얻었다.

• 한국항해항만학회지
• /
• 제46권3호
• /
• pp.243-250
• /
• 2022

본 연구에서는 인공지능을 활용한 영상분석 기술을 통해 영상 내의 월파를 실시간으로 감지하고 처오름 높이를 산정하는 기술을 제안하였다. 본 연구에서 제안한 월파 감지 시스템은 실시간으로 악기상 및 야간에도 월파를 감지할 수 있음을 확인하였다. 특히, 합성곱 신경망을 적용하여 실시간으로 CCTV 영상에서 파랑의 처오름을 감지하고 월파 여부를 판단하는 여과 알고리즘을 적용하여 월파의 발생 감지에 대한 정확성을 향상시켰다. AP50을 통해 월파 감지 결과의 정확도는 59.6%로 산정되었으며, 월파 감지 모델의 속도는 GPU 기준 70fps로 실시간 감지에 적합한 정확도와 속도를 보임을 확인하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.405-408
• /
• 2007

Semi-solid Al-Zn-Mg alloys were produced using a cooling plate method in order to investigate the extrudability. Al melt was poured on cooling plate which was adjusted at $60^{\circ}$ with respect to the horizontal plane, and the melt was cooled by water circulation underneath. Obtained Semi-solid feedstock has globular microstructure but also contains considerable amount of gas pore. Due to the pore, tensile elongation of the semi-solid feedstock was very low and it doesn't show yield point phenomenon. Isothermal hot extrusion was carried out using at $400^{\circ}C$ with a ram speed of 1mm/sec and an extrusion ratio of 25:1. The extruded bar show noticeably improved tensile ductility and strength because pore volume fraction decreased from 5% to 0.8% after extrusion. Mechanical properties of the semi-solid extruded bar were compared with that of commercial casting alloy..

• 소성∙가공
• /
• 제28권6호
• /
• pp.347-353
• /
• 2019

The porthole extrusion process is a classic metal forming process to produce complex cross-section shaped aluminum profile. It is very difficult to design porthole die and extrusion process because of the complex shape of extrusion die and internal metal flow. The main variables in this process are ram speed, initial billet and tool temperature, and die shape. In general, the metal flow of porthole extrusion process can be divided into two steps. During the first step, the billet is divided into several parts in the porthole die bridge. During the second step, the divided billets are welded in the welding chamber. In the welding chamber, the level of welding pressure is very important for the quality of the final product. The purpose of this study is to increase the welding pressure in the welding chamber by using a two stage welding chamber. The porthole extrusion die was designed by using the Taguchi method with orthogonal array. The effectiveness of the optimized porthole die was verified by using the finite element analysis.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.285-288
• /
• 2001

Hypereutectic Al-25Si-X alloys, expected to be applied to the cylinder-liner-part of the engine-block of an automobile due to the excellent wear resistance, low density and low thermal expansion coefficient has been fabricated through a spray forming process. The obtained microstructure of the hypereutectic Al-25Si-X alloy appeared to consist of Al matrix and equiaxed Si particles of average diameter of $5-7{\mu}m$. To characterize the deformation behavior of this alloy, a series of load relaxation and compression tests have been conducted at temperatures ranging from RT to $500^{\circ}C$. The strain rate sensitivity parameter (m) of this alloy has been found to be very low (0.1) below foot and reached 0.2 at $500^{\circ}C$. During the deformation above 300'c in compression, strain softening has been observed. The diagram of extrusion pressure vs. ram-speed has been constructed, providing the extrusion condition of Al-25Si-X alloys.

• 한국생산제조학회지
• /
• 제21권4호
• /
• pp.644-650
• /
• 2012

This paper show the 2kW fiber laser cutting properties of SS400. The study was comparison of traditional 4kW $CO_2$ Laser cutting and 2kW Fiber laser cutting characteristics for the application of Industrial 2D Laser Cutting Machine. The laser used in this investigation was an IPG YLU-2000 multi-mode Ytterbium Fiber machine with a maximum power of 2000W and a wave length of 1070 nm. The laser was used in its Continuous Wave (CW) mode with an approximately top hat beam intensity distribution. Fiber laser high quality cuts at a large range of speeds (ranging from 2000 to 3800 mm/min) which has been obtained for the 2.3mm Sheet of SS400. 2kW power Fiber laser cut was able to max. 20mm sheets of SS400 (speed range from 650 to 850 mm/min). Fiber laser cutting used in conventional hole nozzle could cut 12mm SS400 but used in special dual cutting nozzle could cut 20mm SS400.

• 한국정밀공학회지
• /
• 제29권4호
• /
• pp.395-408
• /
• 2012

An experimental investigation with 2.8kW Nd:YAG laser system was carried out to study the effects of different laser process parameters on the microstructure and hardness of STD11. The optical lens with the elliptical profile are designed to obtain a wide surface hardening area with uniform hardness. The Laser beam is allowed to scan on the surface of the work piece varying the power (1600, 1800 and 1900kW) and traverse speed (200, 400, 600, 800 and 1000mm/min) at three different F-numbers of lens. After laser surface treatment three zones, In the microstructure have been observed : melted zone(decarburization), heat affected zone(martensite), and the substrate.