• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.332-335
• /
• 2004

Polymethyl Methacrylate(PMMA) mortars using EPS solution-based binders are prepared with various unsaturated polyester resin(UP) contents of binder, and tested for working life. heat exothorm temperature, length change. compressive strength and temperature dependence of compressive strength. As a result, the working life of PMMA mortar is lengthened with raising UP content of binder. Length change of the mortar was condensed from expansion to shrinkage with increasing UP content, and non shrinkage of the mortar is obtained at about UP content of $2.5\%$. The compressive strength of the mortar is increased with an increase in the UP content and reach maximum at UP content of $5\%$. However thermal resistance improvement of the mortar by increasing UP content was not recognized. UP resin was recommended as an effective agent for shrinkage control and strength development of PMMA mortar.

• Journal of Mechanical Science and Technology
• /
• 제17권12호
• /
• pp.1904-1911
• /
• 2003

In order to determine the wear properties of AIP (Arc Ion Plating) deposition, wear process was evaluated by using a Falex test machine. Also, in order to determine the effects of coating material on the wear process, TiC, TiN, and TiCN coatings of thickness about 5 $\mu\textrm{m}$∼6 $\mu\textrm{m}$ coated by Arc ion plating deposition method were tested. The wear property was determined under a dry sliding condition as a function of the applied load, sliding distance, sliding velocity and temperature. The results show that when wear of the coating-layer occurred, specific wear amount increased with the wear rate. At initial state, the wear rate rapidly increased, but it gradually reduced as the velocity increased. Also, when raising the temperature, the wear rate increased in the order of TiCN, TiN and TiC due to the frictional heat.

• 복식문화연구
• /
• 제22권3호
• /
• pp.361-370
• /
• 2014

The fabric, 100% Silk, was dyed with Atractylodes japonica extract solution. The effects of concentration of extracts (colorant), temperature of dyeing, time of dyeing and pH of dye bath were studied. As the concentration of extracts increased, color strength (K/S value) increased progressively. The K/S values increased with raising temperature, time and proper conditions were $80^{\circ}C$ and 80 minutes. Maximum K/S value was obtained at pH 3. The K/S values of mordanted fabrics were increased with increasing mordant concentration up to specific values. Surface color of dyed and mordanted fabrics were yellowish. Light color fastness of fabric with mordanting was fairly good 3/4 rating. The mordanted silk fabrics showed excellent antibacterial activity. The silk fabric dyed with Atractylodes japonica extract showed a superior UV protective property.

• 한국세라믹학회지
• /
• 제26권4호
• /
• pp.550-558
• /
• 1989

Polycrystalline diamond films have been deposited on Si wafer Ly hot W filament CVD method using CH4H2 mixtures. The effects of surface pretreatment, W filament temperature, CH4 volume fraction, and addition of water vapor on the growth rate and morphology of the films were investigated. Surface pretretment was essential for depositing a continuous diamond film. Raising the filament temperature resulted in an increased growth rate and a better crystal quality of the film. As the methane content is varied from 0.5% to 5%, well-faceted crystals gradually transformed into spherical particles of non-diamond phase with a simultaneous increase in the growth rate. Addition of water vapor markedly improved the crystallinity to produce crystalline particles even with 5% methane mixture.

• Macromolecular Research
• /
• 제8권4호
• /
• pp.147-152
• /
• 2000

The activity of periodic acid as an initiator for the polymerization of acrylamide in aqueous medium was investigated. The rate of polymerization was found to be proportional to the monomer concentration to the 1.5th power in the range of 1.41-5.64 mol/L. The reaction order to the periodic acid concentration was 0.49, which indicated a bimolecular mechanism for the termination reaction in the range of 0.5-4.0$\times$10$\^$-2/ mol/L. Propagation rate increased with raising the temperature according to an Arrhenius expression resulting in the exhibition of an apparent activation energy of 87.8 kJ/mol in the temperature range of 60-80$\^{C}$. The addition of hydroquinone as a radical scavenger stopped the polymerization of acrylamide initiated by periodic acid. These results support that the polymerization proceeds via a radical chain mechanism .

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.325-328
• /
• 2005

Bainitic microalloyed steels have drawn a lot of attention because of high strength combined with high toughness. In order to process the alloys easily , it is necessary to get the alloys of high hardenability. Mo and B were added to enhance the hardenability, which was demonstrated by TTT simulation and microstructures. It was also identified using BNCT that B, hardenability raising element, was distributed more evenly as cooling rate went up. Examination of grain coarsening temperature depending upon austenitizing temperature revealed that V and Ti effectively inhibited the grain growth up to $1000^{\circ}C\;and\;1050^{\circ}C$ respectively.

• 원예과학기술지
• /
• 제19권3호
• /
• pp.334-337
• /
• 2001

오이의 평난지 억제재배를 위한 고랭지에서의 육묘효과를 구명하고자 본 실험을 수행하였다. 7월 31일에 강릉과 대관령의 비가림하우스 내에서 각각 플러그트레이에 파종한 후 25일간 육묘하여 8월 25일에 강릉의 비가림하우스에 정식하였다. 육묘기간 중 대관령의 평균기온과 최저기온은 $20.9^{\circ}C$와 $16.1^{\circ}C$로 강릉에 비하여 $3.7^{\circ}C$와 $5.3^{\circ}C$씩 각각 낮았다. 강릉에서 기른 묘는 생육량은 많았으나 웃자라 보였으며, 이에 비해 대관령에서 기른 묘는 엽록소 함량이 많고 T/R율은 낮아 묘가 건실하였다. 육묘지역별 10절까지의 암꽃 착생률은 강릉에 비해 대관령에서 4 22%가 높았고, 백침계의 경우 대관령에서 육묘한 것이 강릉에 비해 상품수량이 32% 증가되었다. 평난지 억제재배용 오이육묘에 적합한 지역은 고랭지였으며 백침계 오이에서 그 효과가 가장 컸다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.407-408
• /
• 2002

This paper presents a split cooling system for a new inline 4-cylinder automotive engine. The split cooling system circulates coolant to the cylinder head and cylinder block separately. The coolant flow in the cylinder block is controlled by a $2^{nd}$ Thermostat installed at the outlet of cylinder block. The $2^{nd}$ thermostat closes when the coolant temperature is low. And this makes the coolant flow in cylinder block nearly stagnant, thereby reducing the coolant-side heat transfer coefficient and raising cylinder bore temperature. The $2^{nd}$ thermostat starts to open when the coolant temperature reaches a specified temperature. The test results on engine dynamometer show improved fuel economy and lower exhaust emission which result from the decrease in friction works and cooling loss. Also, several vehicle tests, with application of the new engine have been performed. Fuel economy improvement of 0.5{\sim}2.0%$ yields from different test modes and details are discussed in this paper.

• 대한화학회지
• /
• 제27권1호
• /
• pp.9-17
• /
• 1983

듀렌과 요오드 사이의 전하이동착물의 안정도에 미치는 압력과 온도의 영향을 n-헥산용액에서 자외선 분광 광도법으로 연구하였다. 압력은 1에서 1600bar, 온도는 25, 40, $60^{\circ}C$ 사이에서 측정하였다. 착물의 평형상수는 압력 및 온도의 증가와 더불어 증가 및 감소하고 흡수계수는 대체로 증가함을 알았다. 이들 각 평형상수로부터 착물형성에 따른 부피, 엔탈피, 자유에너지 및 엔트로피 변화량을 구하였다. 또한 압력의 증가에 의한 red-shift, 온도의 증가에 의한 blue-shift 현상 및 압력변화에 의한 진동차 세기의 관계를 열역학적 함수와 관계지워 설명하였다.

• 한국세라믹학회지
• /
• 제40권6호
• /
• pp.525-529
• /
• 2003

Biotribological properties, such as wear rate and friction coefficient, of 3Y-TZP and Low Temperature Degradation (LTD) free materials were investigated via a ball(SiC)-on-plate sliding wear test to evaluate the relationship between wear mechanism and phase transformation. Wear test was conducted with a sliding speed of 0.035 m/s at room temperature and at 25$0^{\circ}C$ in air under a normal load of 49 N, respectively. Although friction coefficient of 3Y-TZP was the lowest due to the fine grain size, the highest wear loss and rate were observed due to the debris of monoclinic grains introduced during sliding and their values increased drastically with raising temperature. However, the biotribological properties of LTD-free materials were insensitive to temperature due to the inertness of the phase transformation, suggesting that they may be applicable to the biomechanical parts.