• Journal of Environmental Science International
• /
• v.27 no.10
• /
• pp.845-851
• /
• 2018

In this study, the runoff characteristics of the non-rainfall period were examined using daily rainfall data from 1977 to 2017 and the data of runoff into the dam. Results showed that, the mean runoff decreases with longer non-rainfall periods in the Andong dam basin. The correlation coefficient between non-rainfall days and average runoff reaches 0.85. The results of the analysis of the runoff characteristics during the non-rainfall period, based on the preceding rainfall of Andong dam are as follows. The runoff characteristics of the entire non-rainfall period, shows that, for a rainfall of 1.0 mm or less, the runoff height was larger than the rainfall size and the base runoff larger. The correlation between the antecedent rainfall and runoff height was reached as high as 0.9864 in the 30 ~ 50 mm interval of the antecedent rainfall period, and this is the interval where the linearity of rainfall and runoff was at its maximum in the Andong dam basin. The correlation between the antecedent rainfall and the runoff height reached 0.92 for rainfalls of 100.0 mm. However, for rainfalls of 100.0 mm greater, the correlation between the antecedent rainfall and runoff height during the rainfall period was 0.64, which is relatively small. In this study, we investigated the runoff characteristics of the rainfall period in the Andong dam watershed. As a result, it was confirmed that the mean runoff decreased with rainfall duration. The linearity was found to be weak for rainfall events greater than 100.0 mm. The results of this study can be used as data for water balance analysis and for formulating a water supply plan to establish water resource management of Andong dam.

• Journal of Environmental Science International
• /
• v.12 no.9
• /
• pp.949-955
• /
• 2003

The subject basin of the research was the basin of Yeongcheon Dam located in the upper reaches of the Kumho River. The parameters of the model were derived from the results of abstracting topological properties out of rainfall-runoff observation data about heavy rains and Digital Elevation Modeling(DEM) materials. This research aimed at suggesting the applicability of the CELLMOD Model, a distribution-type model, in interpreting runoff based on the topological properties of a river basin, by carrying out runoff interpretation far heavy rains using the model. To examine the applicability of the model, the calculated peaking characteristics in the hydrograph was analyzed in comparison with observed values and interpretation results by the Clark Model. According to the result of analysis using the CELLMOD Model proposed in the present research for interpreting the rainfall-runoff process, the model reduced the physical uncertainty in the rainfall-runoff process, and consequently, generated improved results in forecasting river runoff. Therefore it was concluded that the algorithm is appropriate for interpreting rainfall-runoff in river basins. However, to enhance accuracy in interpreting rainfall-runoff it is necessary to supplement heavy rain patterns in subject basins and to subdivide a basin into minor basins for analysis. In addition, it is necessary to apply the model to basins that have sufficient observation data, and to identify the correlation between model parameters and the basin characteristics(channel characteristics).

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.1
• /
• pp.47-57
• /
• 2018

This study implemented the rainfall-runoff analysis of the Mekong River basin using the SWAT (Soil and Water Assessment Tool). The runoff analysis was simulated for 2000~2007, and 11 parameters were calibrated using the SUFI-2 (Sequential Uncertainty Fitting-version 2) algorithm of SWAT-CUP (Calibration and Uncertainty Program). As a result of analyzing optimal parameters and sensitivity analysis for 6 cases, the parameter ALPHA_BF was found to be the most sensitive. The reproducibility of the rainfall-runoff results decreased with increasing number of stations used for parameter calibration. The rainfall-runoff simulation results of Case 6 showed that the RMSE of Nong Khai and Kratie stations were 0.97 and 0.9, respectively, and the runoff patterns were relatively accurately simulated. The runoff patterns of Mukdahan and Khong Chaim stations were underestimated during the flood season from 2004 to 2005 but it was acceptable in terms of the overall runoff pattern. These results suggest that the combination of SWAT and SWAT-CUP models is applicable to very large watersheds such as the Mekong for rainfall-runoff simulation, but further studies are needed to reduce the range of modeling uncertainty.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.208-208
• /
• 2022

Recently, the frequency of abnormal weather due to complex factors such as global warming is increasing frequently. From the past rainfall patterns, it is evident that climate change is causing irregular rainfall patterns. This phenomenon causes difficulty in predicting rainfall and makes it difficult to prevent and cope with natural disasters, casuing human and property damages. Therefore, accurate rainfall estimation and rainfall occurrence time prediction could be one of the ways to prevent and mitigate damage caused by flood and drought disasters. However, rainfall prediction has a lot of uncertainty, so it is necessary to understand and reduce this uncertainty. In addition, when accurate rainfall prediction is applied to the rainfall-runoff model, the accuracy of the runoff prediction can be improved. In this regard, this study aims to increase the reliability of rainfall prediction by analyzing the uncertainty of the Korean rainfall ensemble prediction data and the outflow analysis model using the Limited Area ENsemble (LENS) and the Grid based Rainfall-runoff Model (GRM) models. First, the possibility of improving rainfall prediction ability is reviewed using the QM (Quantile Mapping) technique among the bias correction techniques. Then, the GRM parameter calibration was performed twice, and the likelihood-parameter applicability evaluation and uncertainty analysis were performed using R², NSE, PBIAS, and Log-normal. The rainfall prediction data were applied to the rainfall-runoff model and evaluated before and after calibration. It is expected that more reliable flood prediction will be possible by reducing uncertainty in rainfall ensemble data when applying to the runoff model in selecting behavioral models for user uncertainty analysis. Also, it can be used as a basis of flood prediction research by integrating other parameters such as geological characteristics and rainfall events.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.583-587
• /
• 2005

At present, various methods are available to analyze storm runoff data. Among these, application of Z-transform is comparatively simple and new, and the technique can be used to identify rainfall and unit hydrograph from analysis of a single storm runoff. The technique has been developed under the premise that the rainfall-runoff process behaves as a linear system for which the Z-transform of the direct runoff equals the product of the Z-transforms of the transfer function and the rainfall. In the hydrologic literatures, application aspects of this method to the rainfall-runoff process are lacking and some of the results are questionable. Thus, the present study provides the estimation of Z-transform technique by analyzing the application process and the results using hourly runoff data observed at the research basin of International Hydrological Program (IHP), the Pyeongchanggang River basin. This study also provides the backgrounds for the problems that can be included in the application processes of the Z-transform technique.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.1
• /
• pp.47-54
• /
• 2012

This study analyzed influence factors and the correlation among pollutants which affect occurrence of leaked pollution based on the long-term runoff flow and water quality investigation results to understand the characteristics of highway rainfall runoff pollution load. According to the result of correlation analysis on TSS (Total Suspended Solid) concentration, anteceded dry days, rainfall intensity, traffic volume and etc. as major influence factors of highway rainfall runoff pollution loads, the correlations were weak or scarce in most items. These results might be attributed that runoff pollutant concentration changes vary severely on changes of rainfall intensity and rainfall duration within rainfall and it is affected by disturbances of vehicles and street cleaning and etc. as characteristics of the highway. While Cu, Fe and Zn which are discharged with high concentrations out of heavy metals showed high correlation with particulate matter, organic matter(COD), nutrient(TN, TP), Ni and Pb showed relatively low correlation in a correlation evaluation by pollutant. Significant correlation with traffic volumes was not shown and TSS concentration even decreased in accordance with increase of the traffic volume. In the comparison with precedent studies, it was considered necessary additional analysis of the effects of rainfall section analysis, road type, disturbances of surface contaminants by vehicles, rainfall and climate conditions, surrounding terrains etc.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.49 no.1
• /
• pp.3-13
• /
• 2007

In this study, spatial characteristics of rainfall in Imha basin were investigated by cross-correlation analysis among rainfall gaging stations and rainfall-runoff analysis used in HEC-HMS model for analysis of influence on observed rainfall. The Kriging technique was applied to rain(all analysis in Imha basin to reflect spatial characteristics of regional rainfall. Their results are compared to rainfall-runoff data with spatially distributed rainfall data as well as the classical thiessen method. The results by kriging technique approached by geostatistical method could reflect spatial characteristics of regional rainfall properly in Imha basin.

• Journal of Korea Water Resources Association
• /
• v.50 no.5
• /
• pp.347-358
• /
• 2017

This study examined characteristic differences by the rainfall direction on the runoff responses. The directional characteristics of hydrological components in a basin were quantified by von Mises distribution. The runoff hydrograph was derived using the result of convolution integration of each distribution and this hydrograph was compared with GIUH model and observed data. As a result, it was found that runoff response by rainfall direction was more similar the observed rainfall-runoff data than the runoff result using GIUH model. These results implies that runoff modeling could be improved by considering directional components in hydrologic analysis. This study would be helpful to reduce uncertainties of hydrologic analysis considering a non-linearity of rainfall-runoff process by the rainfall direction.

• Journal of Environmental Science International
• /
• v.24 no.4
• /
• pp.437-447
• /
• 2015

Estimation of runoff peak is needed to assess water availability, in order to support the multifaceted water uses and functions, hence to underscore the modalities for efficient water utilization. The magnitude of storm rainfall acts as a primary input for basin level runoff computation. The rainfall-runoff linkage plays a pivotal role in water resource system management and feasibility level planning for resource distribution. Considering this importance, a case study has been carried out in the Hancheon basin of Jeju Island where distinctive hydrological characteristics are investigated for continuous storm rainfall and high permeable geological features. The study aims to estimate unit hydrograph parameters, peak runoff and peak time of storm rainfalls based on Clark unit hydrograph method. For analyzing observed runoff, five storm rainfall events were selected randomly from recent years' rainfall and HEC-hydrologic modeling system (HMS) model was used for rainfall-runoff data processing. The simulation results showed that the peak runoff varies from 164 to 548 m3/sec and peak time (onset) varies from 8 to 27 hours. A comprehensive relationship between Clark unit hydrograph parameters (time of concentration and storage coefficient) has also been derived in this study. The optimized values of the two parameters were verified by the analysis of variance (ANOVA) and runoff comparison performance were analyzed by root mean square error (RMSE) and Nash-Sutcliffe efficiency (NSE) estimation. After statistical analysis of the Clark parameters significance level was found in 5% and runoff performances were found as 3.97 RMSE and 0.99 NSE, respectively. The calibration and validation results indicated strong coherence of unit hydrograph model responses to the actual situation of historical storm runoff events.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.3
• /
• pp.281-288
• /
• 2004

The objective of this study is to propose a methodology of the flood runoff analysis in steep mountainous basins and the analysis basin is the Jasa valley basin in Chungju city Analyzing the spatial pattern of the rainfall in 1994. 6 30~7.1, the seasonal rainy front was tied up in the whole central district, and the rainfall center was moving from the northern Chungbuk province to the northern Kyongbuk province and caused heavy storm. Analyzing the temporal pattern with the Huff method, the 52.5% of the rainfall was concentrated on the 3rd quartile. Rainfall frequency analysis is accomplished by five distribution types; 2-parameter Lognomal, 3-parameter Lognomal, Pearson Type III, Log-Pearson Type III and Extremal Type I distribution Rainfall-runoff analysis in Jasa valley basin was made using HEC-HMS model. Jasa valley basin was divided into 3 sub-basins and the analysis point was 3 points{A, B and C point) With the rainfall data measured by the 10 minutes, the flood runoff also was calculated by as many minutes. SCS CN model, Clark UH model and Muskingum routing model in HEC-HMS model were used to simulate the runoff volume using selected rainfall event.