• 제목/요약/키워드: Rainfall Peak flow

검색결과 189건 처리시간 0.026초

한국에 있어서 제수문구조물의 설계의 기준을 주기 위한 수문학적 연구(류거, 홍수 편) (The furulamelllal study in order to obtain the hydrological design basis for hydrological structures in Korea (Run ofl estimate and Flood part))

  • 박성우
    • 한국농공학회지
    • /
    • 제8권1호
    • /
    • pp.1011-1034
    • /
    • 1966
  • This thesis is the final report which has long been studied by the author to obtain the design basis for various hydrological constructions with the specific system suitable to the natural environmental conditions in Korea. This report is divided into two parts: one is to estimate runoff volume from watersheds and the other to estimate the peak discharge for a single storm. According to the result of observed runoff record from watersheds, it is known that Kajiyama formula is useful instrument in estimating runoff volume from watersheds in this country. But it has been found that this formula shows us 20-30% less than the actual flow. Therefore, when wihed to bring a better result, the watershed characteristics coefficient in this formula, that is, f-value, should be corrected to 0.5-0.8. As for the method to estimate peak discharge from drainage basin, the author proposes to classify it in two ways; one is small size watershed and the other large size watershed. The maximum -flood discharge rate $Q_p$ and time to peak Pt obtained from the observed record on the small size watershed are compared by various methods and formulas which are based upon the modern hydrological knowledge. But it was fou.d that it. was not a satisfied result. Therefore, the author proposes. tocomputate $Q_p$, to present 4.0-5.0% for the total runoff volume ${\Sigma}Q$.${\Sigma}Q$ is computed under the assumption of 30mm 103s in watershed per day and to change the theoritical total flow volume to one hour dura tion total flow rate when design daily storm is given. Time to peak Pt is derived from three parameters which are u,w,k. These are computed by relationship between total runoff volume (ha-m unit)and $Q_p$. (C.M.S. unit). Finally, the author checked out these results obtained from 51 hydrographs and got a satisfied result. Therefore the author suggested the model of design dimensionless unit-hydrograph. And the author believes that this model will be much available at none runoff record river site. In the large size watersheds in Korea when the maximum discharge occurs, the effective rainfall is two consequtive stormy days. So the loss in watershed was assutned as 6Omm/2days,and the author proposed 3-hour-daration hydrograph flow distribution percentage. This distribution percentage will be sure to form the hydrograph coordinate.

  • PDF

HEC-HMS을 이용한 안성천 유역의 강우 유출 특성 분석 (Analyis of stormwater and runoff characteristics in Anseongcun basin using HEC-HMS)

  • 황병기;양승빈
    • 한국산학기술학회논문지
    • /
    • 제19권4호
    • /
    • pp.17-24
    • /
    • 2018
  • 과거 홍수로 인한 침수피해가 자주 발생하였던 안성천 하류 저지대의 홍수-유출 특성을 파악하기 위해서 HEC-HMS 모형을 적용하였다. 모형은 SCS-CN 방법으로 손실계산을, Clark의 단위도법으로 강우의 직접유출 변환을, 지수함수적 감소방법으로 기저유량을, Musingum 방벙으로 하도추적을 하는 과정을 포함한다. 모형에서 매개변수는 중요한 역할을 하므로, 최적화 기법을 시행착오법과 병행하여 최적화 변수를 도출하였다. 또한, 민감도 분석을 통하여 도달시간, 저류함수, 기저유량 관련 상수들이 모형에 미치는 영향을 파악하였다. 도달시간은 첨두유량 발생 시각에 영향을, 저류상수는 첨두 유량의 증감에 영향을 기저유량 감소비는 수문곡선 하강부의 기울기에 영향을 미치는 것으로 나타났다. 최적화 과정을 통하여 모형 보정을 거친 변수를 사용하여 2건의 강우 사상에 대하여 유출모의를 수행하여 실측 자료와 비교를 하였으며, 유출체적, 첨두유량, 첨두시각을 포함한 중요 수문현상에 대하여 상당히 정확하게 모사하는 것으로 나타났다. 따라서, 본 연구의 결과는 정책입안자가 홍수관리대책을 수립하는 데 유용한 도구로서 사용되어 질 수 있을 것으로 사료된다.

SWMM을 이용한 도시화유역 불투수율 변화에 따른 강우유출특성 분석 (Analysis of Rainfall-Runoff Characteristics on Impervious Cover Changes using SWMM in an Urbanized Watershed)

  • 오동근;정세웅;류인구;강문성
    • 한국물환경학회지
    • /
    • 제26권1호
    • /
    • pp.61-70
    • /
    • 2010
  • The increase of impervious cover (IC) in a watershed is known as an important factor causing alteration of water cycle, deterioration of water quality and biological communities of urban streams. The study objective was to assess the impact of IC changes on the surface runoff characteristics of Kap Stream basin located in Geum river basin (Korea) using the Storm Water Management Model (SWMM). SWMM was calibrated and verified using the flow data observed at outlet of the watershed with 8 days interval in 2007 and 2008. According to the analysis of Landsat satellite imagery data every 5 years from 1975 to 2000, the IC of the watershed has linearly increased from 4.9% to 10.5% during last 25 years. The validated model was applied to simulate the runoff flow rates from the watershed with different IC rates every five years using the climate forcing data of 2007 and 2008. The simulation results indicated that the increase of IC area in the watershed has resulted in the increase of peak runoff and reduction of travel time during flood events. The flood flow ($Q_{95}$) and normal flow ($Q_{180}$) rates of Kap Stream increased with the IC rate. However, the low flow ($Q_{275}$) and drought flow ($Q_{355}$) rates showed no significant difference. Thus the subsurface flow simulation algorithm of the model needs to be revisited for better assessment of the impact of impervious cover on the long-term runoff process.

고속도로 노면 강우유출 오염부하 원단위 산정 (Analysis of Unit Pollution Load on Highway runoff)

  • 강희만;이두진;배우근
    • 상하수도학회지
    • /
    • 제26권1호
    • /
    • pp.55-68
    • /
    • 2012
  • Impervious surface increase due to urbanization, one of the leading causes of pavement increased the runoff coefficient, peak flow, and reducing the infiltration flow and thereby causing flooding and river erosion is occurring in aquatic ecosystems are known to impair. This study aimed to classify use type of detailed land into the road, reststop, tollgates and etc. focused on major domestic highways, to understand the characteristics of rainfall runoff pollutants and to calculate applicable unit pollution load. Because of high runoff coefficient and short travel time to drainage. first flush occurred clearly. Average EMCs of runoff in the highway was investigated as TSS 108.47 mg / L, COD 28.16 mg / L, BOD 13.61 mg / L, TN 6.38 mg / L, TP 0.03 mg / L, Cu 118.17 ${\mu}g$ / L, Pb 345.3 ${\mu}g$ / L, Zn 349.47 ${\mu}g$ / L. Unit pollution loads calculated by detailed land use area of highways based on average annual rainfall, EMCs, applicable basin areas and etc. were 46.6 kg/km2/day of BOD, 1.4 kg/km2/day of TP, 8.81 kg / km2/day of TN and these were BOD 50.8%, TP 66.7%, TN 64.4%in comparison of the unit pollution loads which applies fallow land standards of the TMDL(Total Maximum Daily Load). It was considered that discharged loads can be excessively calculated in case highway non-point management plans based on unit pollution load of the current land standard.

SWMM 모형을 이용한 시화호 유역의 강우 유출 특성 분석에 관한 연구 (Analysis of Rainfall-Runoff Characteristics in Shiwha Industrial Watershed Using SWMM)

  • 이혜원;최정현
    • 대한환경공학회지
    • /
    • 제37권1호
    • /
    • pp.14-22
    • /
    • 2015
  • 산업단지의 유량 및 오염물질 유출 특성을 분석하기 위하여, SWMM 모형을 시화산업단지 1간선수로에 적용하여 분석하였다. 2008년과 2009년에 시화1간선수로에서 측정한 6회의 단일 강우 사상을 대상으로 유출량 및 SS, COD, TN 및 TP 부하량의 보정을 실시하였다. 대부분 불투수지역으로 구성되어 있는 시화1간선수로 유역의 오염물질의 축적 과정은 지수 형태로 이루어진 후 강우에 유출되는 Power-linear을, 쓸림은 토지이용에 따라서 도시지역은 초기 세척을 잘 묘사할 수 있는 Power-Exponential이 적합한 것으로 판단된다. 검증된 SWMM 모형을 활용하여 불투수면적의 변화가 산업단지 내 유출량 및 첨두시간 변화에 미치는 영향 분석하였다. 본 연구지역에서는 불투수면적 증가에 따라 유출량의 감소는 보였으나, 첨두시간에는 유의한 변화를 보이지 않았다. 본 연구 결과는 산업단지의 불투수면 저감방안 수립 및 유역 관리를 위한 기초정보로 활용할 수 있을 것으로 판단된다.

강우시 도시지역 강우 유출수 오염부하 기원평가 (Evaluating pollution origins of runoff in urban area by stormwater)

  • 황병기
    • 한국산학기술학회논문지
    • /
    • 제7권5호
    • /
    • pp.930-934
    • /
    • 2006
  • 홍제천 유역의 평창 배수분구를 대상으로 강우시 발생하수의 특성을 파악하기 위해 유량 및 수질 조사를 수행하였고, 강우유출수를 기저하수, 강우, 지붕유출수, 도로유출수, 관내 퇴적물 등 오염원별로 분석하여 기원별 초염기여도를 파악하였다. 강우시 발생초기의 오염물질의 농도는 초기세척현상에 의해 비강우시 농도의 3-10배 이상 높게 나타났으나, 강우 후반기에는 희석에 의해 비강우시 평균 농도 보다 오히려 낮은 농도를 보이는 것으로 나타났다. 오염부하의 오염원별 기여도 분석에서 관거 퇴적물에 의한 오염도가 전체 오염도에서 COD의 경우 54.6%를, SS은 73.3%를 차지하여, 가장 높은 기여도를 보여 관거 내 퇴적물의 준설과 세정을 통하여 상당량의 오염부하를 저감시킬 수 있는 것으로 나타났다.

  • PDF

레이더 정량강우와 연계한 홍수유출 및 범람해석 시스템 확립 III. 2차원 홍수범람 모의 (Development of a Flood Runoff and Inundation Analysis System Associated With 2-D Rainfall Data Generated Using Radar III. 2-D Flood Inundation Simulation)

  • 최규현;한건연;김상호;이창희
    • 한국수자원학회논문집
    • /
    • 제39권4호
    • /
    • pp.347-362
    • /
    • 2006
  • 본 연구에서는 하천 제방붕괴로 인한 제내지에서의 범람홍수의 전파양상을 효율적으로 계산할 수 있는 2차원 범람홍수모형을 개발하였다. 또한 범람모의를 위한 기본 입력자료 구축을 위해서 레이더 자료와 연계하였으며, 레이더 정량강우-홍수유출-범람해석에 대한 통합시스템을 구축하였다. 개발된 모형의 검증을 위해서 태풍 루사로 인한 감천 유역의 실제 제방붕괴 사례에 대한 적용을 실시하였으며, 범람모의를 위한 기본자료인 강우량을 산정하기 위해서 레이더 자료와 연계하였고, 지상의 강우관측자료와 최적으로 조합하기 위한 cokriging 기법을 적용하였다. 레이더와 연계한 2차원 정량강우량은 유역에서의 홍수량 산정을 위해 이용되었으며, 유역에서의 홍수량은 하도 및 제내지에서의 홍수범람모의를 위해 이용되었다. 모의결과는 실제 홍수흔적과 하천에서의 홍수위 자료 등과 비교하여 잘 일치되고 있음을 확인할 수 있었다.

침수특성치를 이용한 침수위험성 평가 (Flooding Risk Assessment Using Flooding Characteristic Values)

  • 안정환;김건우;조원철
    • 대한토목학회논문집
    • /
    • 제33권3호
    • /
    • pp.957-964
    • /
    • 2013
  • 본 논문은 침수특성치를 이용한 도시유역의 침수위험성 평가방법을 제시하는 연구이다. 2010년 9월 21일 청계천상류의 효자배수분구(광화문 광장일대)에서 발생한 침수피해를 XP-SWMM 2010을 이용하여 모의하였다. 강우발생빈도별, 지속시간별로 관로첨두유출량 값을 구하여 침수상태를 분석한 결과 관로 내 첨두유출량만으로는 침수상태를 충분히 해석할 수 없음을 확인 할 수 있었다. 따라서 도시지역의 침수피해규모를 표현할 수 있는 침수특성치 6가지를 새롭게 정의하였으며 발생가능한 강우조합(강우량, 강우지속시간)을 침수특성치별로 산정하여 침수위험성 평가방법을 연구하였다. 모의 결과를 침수특성치별로 강우조합에 중첩하여 등치선도로 나타낸 "발생가능강우별 침수특성 등치선도"를 개발하여 이를 근거로 발생할 수 있는 모든 강우형태에 대한 침수위험성을 평가할 수 있음을 확인할 수 있었다. 또한 유역의 상태가 변하거나 치수계획규모를 변화시키는 것에 대한 침수특성치별 침수규모 해소정도를 쉽게 파악 할 수 있음을 확인하였다.

도시홍수방재를 위한 수문모니터링시스템의 적용 (Application of Hydrological Monitoring System for Urban Flood Disaster Prevention)

  • 서규우;나현우;김남길
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2005년도 학술발표회 논문집
    • /
    • pp.1209-1213
    • /
    • 2005
  • It reflects well feature of slope that is characteristic of city river basin of Pusan local. Process various hydrological datas and basin details datas which is collected through basin basis data. weather satellite equipment(EMS-DEU) and automatic water level equipment(AWS-DEU) and use as basin input data of ILLUDAS model, SWMM model and HEC-HMS model In order to examine outflow feature of experiment basin and then use in reservoir design of experiment basin through calibration and verification about HEC-HMS model. Inserted design rainfall for 30 years that is design criteria of creek into HEC-HMS model and then calculated design floods according to change aspect of the impermeable rate. Capacity of reservoir was determined on the outflow mass curve. Designed imagination reservoir(volume $54,000m^3$) at last outlet upper stream of experiment basin, after designing reservoir. It could be confirmed that the peak flow was reduced resulting from examining outflow aspect. Designing reservoir must decrease outflow of urban areas.

  • PDF

논의 배수물꼬의 유량에 관한 기초연구 (A Study on the Outlet Drain Discharge from Paddy Field)

  • 최진규;김현영;손재권
    • 한국농공학회지
    • /
    • 제39권2호
    • /
    • pp.134-142
    • /
    • 1997
  • This study was performed to evaluate the drain runoff characteristics from one paddy field, and to provide the basic data required for the determination of flood discharge and unit drainage water for drainage improvement and farmland consolidation. For this purpose, under the assumption that drain discharge from paddy field was similar to outflow of reservoir, runoff model based on storage equation was applied to the experimental field, and simulated results were compared to the measured discharge at weir point. To estimate effective storage volume of paddy field with water depth, 4 regression formula were examined such as linear, exponential, power, and combined. From the observed runoff characteristics, it was shown to be 3.3~16.3${\ell}$/sec in weir discharge, 57.2~98% in runoff ratio, and relative error of simulated result was 3.0~39.4%, 8.5 ~56.0 % for peak flow and runoff ratio, respectively. Curve number by SCS method was calculated as mean value of 96.4 using measured rainfall and runoff data, it was considered relatively high because paddy field has generally flooding depth contrary to the upland watershed area.

  • PDF