• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.190-198
• /
• 2020

For domestic urban railways, which have a 19.7% aging rate, a performance evaluation is necessary to establish capital improvement investment plans. The performance evaluation, which was recently enacted in the relevant law, points out the excessive time and effort for acquiring data and evaluation. This study developed a performance evaluation simulation prototype using a virtual reality (VR) method to use as training contents for railway performance evaluations. The practical use of the VR technique to reduce the working time under poor environment conditions was confirmed through a literature review. A survey and consultation were conducted for urban railway experts to determine the weight of the performance evaluation items and the facility breakdown structure. This information was utilized to develop performance evaluation sheets for simulation. Based on the evaluation sheet, a training content prototype that evaluates the performance of platform safety doors was developed using VR techniques with HTC VIVE equipment. VR simulation tests were conducted for six players, and the prototype was sufficiently advantageous for a visual confirmation of the facility information. The result is expected to be useful for engineers to understand the performance evaluation process efficiently before an actual performance evaluation of urban railway facilities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.528-535
• /
• 2020

Recently, the protection coordination method of DC systems has been presented because renewable energy and distributed resources are being installed and operated in distribution systems. On the other hand, it is difficult to detect ground faults because there is no significant difference compared to a steady-state current in ungrounded IT systems, such as DC load networks and urban railways. Therefore, this paper formulates the detection principle of IMD (Insulation Monitoring Device) to use it as a protection coordination device in a DC system. Based on the signal injection method of IMD, which is analyzed by a wavelet transform, this paper presents an algorithm of detecting ground faults in a DC system in a fast and accurate manner. In addition, this paper modeled an IMD and an ungrounded DC system using the PSCAD/EMTDC S/W and performed numerical analysis of a wavelet transform with the Matlab S/W. The simulation results of a ground fault case in an ungrounded DC system showed that the proposed algorithm and modeling are useful and practical tools for detecting a ground fault in a DC system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.11
• /
• pp.1437-1443
• /
• 2013

Railways are currently subject to the enforcement of speed limits for each curve as prescribed by the Railway Operating Rules in Korea. However, research is required to determine the maximum speed of trains passing through each curve that allows them to run without the risk of derailment in relation to the speed enhancement of existing railway tracks. In addition, factors affecting the running safety of railway vehicles can be classified into those in terms of vehicle aspects and those in terms of track aspects. This study sought to analyze the running safety of railway vehicles according to changes in the inclination of the rail from among the factors affecting the enhancement of safety against derailment. To increase the speed of trains passing through curves that have high derailment risk, this study also analyzed the running safety of railway vehicles according to the inclination of the rail and changes in running speed while a vehicle passes through each curve section in both the up and the down train line sections between Namsunghyun and Chungdo, which represent the actual conditions of railway tracks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.382-391
• /
• 2016

For safety-critical systems including railways, there has been a growing need for effective and systematic safety management processes. The outcomes of efforts in this area are international safety standards, such as IEC 61508, 62278, and ISO 26262. One of the principal activities in the safety process is hazard analysis. For this reason, considerable efforts have been directed toward methods of hazard analysis. On the other hand, the hazard analysis methods reported thus far appear to be unclear in terms of their relationship with the system design process. In addition, in some cases, the methods appear to rely heavily on information regarding the hardware and software components, the number of which is increasing. These aspects can become troublesome when design changes are necessary. To improve the situation, in this paper, hazard analysis was carried out using the result of functional analysis early in the concept development stage for a safety-critical system design. Because hazard analysis is carried out at the system level and the result is then used to develop the safety requirements, improvements can be expected in terms of the development time and cost when design changes are required due to changes in the requirements. As a case study, the generation of safety requirements for the development of light rail transit stations is presented.

• Journal of Korea Port Economic Association
• /
• v.27 no.3
• /
• pp.331-348
• /
• 2011

Recently, international society strongly concerns global green house effect. As a result each nation introduces green policy for their economy and sustainable development. The emissions of carbon dioxide come from various sources, such as ports and port activities. Especially, port is a logistics hub for shipping, road and railways. Therefore, successful reduction of emissions in the port may encourage other transportations to reduce emissions. Korea as developing country is excused from Annex I countries which committed themselves to reduce four greenhouse gases. However, Korea is going to be placed in Annex I countries in 2013. Korean economy is heavily dependent on international trade and especially, 99.8% of its international trade cargoes is transported through the ports. Therefore, Eco-port plays a very important role in future Korean sustainable development. By introducing the most advanced port pollution regulations, Japan has taken a immediate step for Eco-port policy. International trade is very significant in Korea as well as in Japan, both nations have similar industrial structure. Therefore, Korea should pay attention to Japanese Eco-port policy and activities. This paper examines Japanese Eco-port policy and its' implications in order for Korea to find the most efficient way to reduce the emissions as Korea should reduce greenhouse gas emissions in post kyoto system.

• Journal of the Korean Society for Railway
• /
• v.20 no.2
• /
• pp.165-172
• /
• 2017

High frequency squeal noise can be generated when a railroad vehicle runs a sharp curved section; this noise causes environmental complaints and excessive wear on the wheel and the railroad track. In this paper, curved squeal noise experiments on a commercial railway were carried out to investigate this phenomenon. The relationship of the squeal noise pressure level, the frequency characteristics, the railway running speed, and the modal behavior of the wheel were investigated. At the same time, the lateral motion of the wheel relative to the rail was captured using a video camera; wheel movement was calculated when the noise was generated. queal noise occurred at the highest level at the inner front wheel; this phenomena is considered to be related to the lateral vibration response characteristics of the wheel. It can be seen that the magnitude of this squeal noise is not directly related to the increase in vehicle speed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.3
• /
• pp.31-40
• /
• 2012

The irregularity of railway track affects not only the comfort of ride such as noise or vibration but also the safety of train operation. For this reason, it is an interesting research area to design a reliable and sustainable railway track system and to analyze the train movement mechanism based on systematic approaches considering reasons of track irregularity possible in a specific local environment. Irregularity data inspected by EM-120, an railway inspection system in Korea includes unavoidable incomplete and erratic information, so it is encountered lots of problem to analyse those data without appropriate pre-data-refining processes. In this research, for the efficient management and maintenance of railway system, progress rate of standard deviation of irregularity is quantified. During the computation, some important components of railways such as rail joint, ballast, roadbed, and fastener have been considered. Probabilistic distributions of irregularity growth with respect to time are computed to predict the remaining service life of railway track and to be adapted for the safety assessment.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.5
• /
• pp.749-760
• /
• 2017

Recently, the proportion of tunnel structures in roads and railways has increased rapidly. Along with this trend, the rate of occurrence of cracks and dropouts in concrete lining of tunnel structures is increasing. Generally, maintenance of such concrete lining is normalized and managed as the core of maintenance work in tunnel maintenance. However, the maintenance of the tunnel pavement is important in securing driver in the tunnel. In the design of tunnels, the underground condition of the tunnel is designed to be in good rock condition, so there have not been many cases of cracks in the tunnel pavement in the past. Recently, the construction of tunnel structures has been rapidly increased, and the length of the tunnels has become longer.Tunnel pavement installed in these ground conditions is increasing the occurrence of cracks in the pavement due to decrease of bearing capacity of the pavement after a long time. In this study, FWD and GPR were conducted to analyze the types of cracks and the reduction of bearing capacity in the tunnel.

• Journal of the Korean Society for Railway
• /
• v.18 no.2
• /
• pp.157-165
• /
• 2015

At the end of the 19th and in the early 20th centuries, Japan, Korea, and Manchuria, and areas throughout East Asia, suffered a number of cycles of growth and development, for which the railway was a very important development tool and was closely associated with national policy. East Asian affairs, especially at the time, seemed very important to the continent, and their influence on the advance of this remarkable era was especially prominent in Japan. In the midst of this period, the national railway may have evolved under national policy and railway policy and under a variety of organizations and persons of influence. In this paper, we have tried to find the similarities and differences among the three countries that built the East Asia Railway; we consider the characteristics of the East Asia Railway from the perspectives of these three countries. Comparing the characteristics of the three country's railways, first, Japan had the motives of continental expansion and modernization in its pursuit of the railway; in Korea, the railway played the role of a continental rail link; and in Manchuria there was a tendency to pursue direct domination of the railway. Second, the Japanese applied their railway model to Korea; the Korean railway may have been in operation, but it was an extension of the railway of Japan. The railway in Manchuria showed a similar pattern to that which can be found in the state of Asian domination of Europe ; Japan showed aspects of dominance over the railway because it had experience running a private railway.

• Journal of Korea Port Economic Association
• /
• v.32 no.2
• /
• pp.1-24
• /
• 2016

Northeast Asia is changing rapidly, including becoming an increasingly important part of the world economy. Various logistical systems and networks are being established in this area, including South and North Korea, China, Japan, Russia, and Mongolia. Thus, a new systematic logistical network and development strategy is required. The division of the Korean peninsula has for a long time made the region ineffective in terms of land logistics. South Korea's connection to Eurasia is blocked by North Korea, which means it is essentially treated as an island. Furthermore, South Korea does not have an efficient logistics system or effective vision and strategy. Northeast Asia has the potential to be one of the largest economic communities in the world, similar to the EU and North America. Thus, a united Korea can play an important role as the land bridge of Northeast Asia and the logistical hub of the region. This study reviews the logistical position, tasks, and problems of the Korean peninsula and suggests a desirable development strategy and vision. Specifically, after examining the conditions for a land logistical system, focusing on railways, this study proposes several future-oriented development strategies and tactics that will position the peninsula as a logistical hub in Northeast Asia. We anticipate that this study will serve as the basis for future research that will investigate the topics presented here in more detail.