• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.5
• /
• pp.30-41
• /
• 2017

Types of noise barrier installed for noise attenuation are largely divided into noise-absorbing format and noise-proofing format. In these days, installation of transparent noise barrier is general trend to solve problems that hinder sunshine and landscape. Some kinds of transparent boards are used to one of components in noise barriers, but in some cases, less transparency and worse pollution due to yellowing phenomena, and severe material deformation are to harm the urban aesthetics Therefore laminated-tempered glass board in that yellowing phenomena does not occur can be replaced as a transparent one to secure those shortcomings. In this paper, the structural safety against train induced vibration and the resistibility to wind load are analyzed for laminated-tempered glass system as a component of noise barrier installed on Metro railway elevated bridges. Also the appropriateness is evaluated through flexural bending performance test, compressive strength test, modulus of elasticity tests, and impact test for the system or the glass material itself. All of these processes are intended to present the deployment of logic to evaluate the adequacy for the system.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1509-1513
• /
• 2009

The research of applying reinforced retaining wall due to support the land pressure that given from train's load has been accomplished actively in domestic area. After the retaining wall has been installed, the collapse or partial destruction that generated by effect of train's vibration and repetitive load of train may be induced. Accordingly in the period of using this, the sufficient durability should be guaranteed and years of durability are one hundred and as these are longer than road structure's, the technique that introduced to wall and monitor the long-term strain is necessary. In this paper, the optical fibre is induced vertically to the reinforced retaining wall and after the subsistence of optical fibre is confirmed, the early strain that applied to optical fibre after insertion is monitored. Before and after the concrete placing, damage feasibility of optical fibre is measured by using OTDR(Optical Time Domain Reflectometer) and after concrete is cultivated, the early strain induced to optical fibre is measured by application of BOCDA (Brillouin Correlation Domain Analysis) system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.146-153
• /
• 2003

본 논문은 열차 곡선부 노선에서 발생하는 진동크기의 예측을 위한 것으로, 곡선부를 주행하는 틸팅 차량에 의해 발생하는 진동크기를 수치해석적으로 예측한 결과이다. 곡선부를 주행하는 틸팅차량에 의한 진동의 특징으로, 진동의 방향성분을 들 수 있다. 진동의 방향성분은 직선 구간에서는 수직성분이 월등히 우세하나, 곡선구간에서는 수평성분이 크게 증가한다. 틸팅차량의 경우, 일반열차에 비해 곡선 구간에서의 높은 속도로 인해 수평성분이 크게 발생한다 따라서 틸팅차량의 주행에 의한 인근 지역에서의 진동환경을 파악하기 위해서는 수직성분 뿐 아니라 수평성분의 정확한 파악도 필요하다. 이러한 진동의 방향성분은 근거리 또는 원거리 영역에 파라 달라져, 이의 파악을 위한 연구가 필요하다.

• Journal of KSNVE
• /
• v.7 no.2
• /
• pp.293-300
• /
• 1997

Noise and vibration induced by subway operation is one of the major problem for the residents living nearby railway tracks. Many scientists and engineers have been working on proposing the more accurate prediction equation of noise and vibration to provide the better residential environment. Some predictiction equations were determined to compare the measurement value of a noise obtained from the inside of a residential area. It was observed that the condition of a soil type is one of the major parameter which should be considered to obtain the more accurate prediction value of a noise.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.11
• /
• pp.1078-1088
• /
• 2012

Recently, the vibration and structure-borne noise induced by passing trains are of great concerns, and the floating slab track is highlighted as one of most efficient alternatives to reduce the railway vibration. However, due to the non-linearity and viscosity of rubber spring used in the floating slab track, its dynamic behavior is very complex. In this study, therefore, to simulate the dynamic behavior of floating slab track with a better accuracy, a nonlinear viscoelastic rubber spring model that can be incorporated in commercial finite element analysis codes has been proposed. This model is composed of a combination of elastic spring element, friction element and viscous element, and termed the "generalized friction viscoelastic model(GFVM)". Also, in this study, the method to determine the model parameters of GFVM based on Berg's 5-parameter model was presented. The results of the finite element analysis with this rubber spring model exhibit very good correlation with the test results of a laboratory mock-up test, and the feasibility of GFVM has been verified.

• Journal of the Korean Society for Railway
• /
• v.15 no.5
• /
• pp.485-497
• /
• 2012

Recently, with increasing social interests on noise and vibration induced by railway traffic, the application of floating slab track that can efficiently reduce the railway vibration is increasing. In this study, to more accurately understand the dynamic behavior of the floating slab track, a laboratory mock-up test has been performed, and the static and dynamic behaviors at frequency range near the system resonance frequency were explored. Based on the test results, the design of the floating slab track and the structural analysis model used in the design have been verified. The analytic and test results demonstrate that the dominant frequency of the floating slab track occurs at the frequencies between vertical rigid body mode natural frequency and bending mode natural frequency, and the dominant deformation mode is close to the bending mode. This suggests that in the design of the floating slab track, the bending rigidity of the slab and the boundary conditions at slab joints and slab ends should be taken into consideration. Also, the analytic results by the two-dimensional finite element analysis model using Kelvin-Voigt model, such as static and dynamic deflections and force transmissibility, are found in good agreement with the test results, and thus the model used in this study has shown the reliability suitable to be utilized in the design of the floating slab track.

• Wind and Structures
• /
• v.29 no.3
• /
• pp.149-161
• /
• 2019

When a railway vehicle runs in crosswinds, the unsteady aerodynamic forces acting on the train induced by the vehicle speed, crosswind velocity and local landforms are a common problem. To investigate the dynamic performance of a railway vehicle due to the influence of unsteady aerodynamic forces caused by local landforms, a vehicle aerodynamic model and vehicle dynamic model were established. Then, a wind-loaded vehicle system model was presented and validated. Based on the wind-loaded vehicle system model, the dynamic response performance of the vehicle, including safety indexes and vibration characteristics, was examined in detail. Finally, the effects of the crosswind velocity and vehicle speed on the dynamic response performance of the vehicle system were analyzed and compared.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.735-741
• /
• 2007

A turnout system which permits trains to pass from one track to another is a combination of the switch, the crossing, lead rails which are necessary to connect the switch and the crossing, two guard rails and a switch machine for operating the switch. In Korea, it has been planned to adopt the high speed tilting train which is suitable for the circumstance of Korea and operates at the maximum speed of 180 km/h, at conventional lines by the year of 2010. For the present, the prototype of the tilting train has been fabricated, and has undergoing a trial run. In this study, evaluation of noise around the turnout system induced by the tilting train has been implemented through the field measurements.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.359-362
• /
• 2005

Road traffic noise level and railway noise level are important factors on apartment inhabitant's comforts. The measurement methods which noted by Ministry of Construction & Transportation(MOCT) and Ministry of Environment(ME) are used for measurement of exterior noise at apartment houses. But these methods are out of date because the height of apartment houses have increased dramatically and owing to the sampling methods of the measurement time interval, rating values are induced differently due to sampling methods. In this study, the sound level of each floor of apartment houses is measured and compared. And rating value due to sampling methods are compared. As a result, the KS outline of 'Field Measurement of Exterior Noise at Apartment Housess' is suggested.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2405-2408
• /
• 2011

In recent time, the cause analysis and the reduction of the track irregularity have become the most important issue in the ballasted track on the high-speed railway bridge. This is because that the frequency of the maintenance work at the bridge expansion joint zone is on the rise. The track irregularity on the railway bridge starts at the end of the bridge-deck and spreads along the bridge. Due to the dynamic vibration and the thermal expansion of the bridge, the compaction of the ballast gravel on the bridge expansion joint zone become loose and then the progress of the track irregularity result from the train-induced dynamic impact is accelerating further. Among the several options for reducing the track irregularity on the bridge expansion joint zone, the application and efficiency of the zero longitudinal restraint(ZLR) and tied sleeper are investigated in this paper. Field test construction has been conducted, then the progress of the track irregularity and the frequency of the maintenance work are analyzed before and after the filed test construction. Of the two methods, it is shown that the installation of the ZLR seems to be better than the tied sleeper.