• International Journal of Railway
• /
• v.5 no.1
• /
• pp.1-9
• /
• 2012

Reliability means that a product maintains its initial quality and performance at a certain period of time (time, distance, cycle etc) under given condition without failure. The given conditions include both environmental condition and operating condition. Environmental condition means a common natural environment such as temperature, humidity, vibration, and working condition means an artificial environment such as voltage, current load, place for installment, and hours of use, which occurs during the life of the product. In the field of railway vehicles, it is mandatory to use a part with the proved reliability as the extension of the life of vehicle become highly necessary. But the reliable assessment method for the reliability of the part is insufficient. If the reliability of the railway vehicle parts could be assessed by using the field data, the reliability of the entire system could also be evaluated reliably. In this study, life span of micro-switch for master controller is analyzed and prediction is performed based on its field data given by an operator considering the special circumstances of railway vehicles such as the operation of a large number of trains on the same line.

• Journal of the Korean Society for Railway
• /
• v.14 no.1
• /
• pp.66-72
• /
• 2011

In order to assure the safety of train operation, a safety function analysis corresponding hazardous events of railway accidents and a safety requirement review on operation & management of trains have been performed. The preconditions and train composition requirements such as safety principles and functions that should be essentially considered to enable the safety operation of Urban-Transit trains are clearly presented. On the basis of presented train composition requirements, a rational revise of Urban Railway Operation Rule is proposed. It will be helpful in accident prevention and safety improvement for railway operation.

• Journal of the Korean Society for Railway
• /
• v.10 no.1 s.38
• /
• pp.22-28
• /
• 2007

During the passage of the train, the railway bridge undergoes vibration and noise. The noise of railway bridge can be occurred from various sources. The wheel-rail contact, noise from machinery parts, structural-borne noise, pantagraph noise and aerodynamic noise of the train work in combination. Running train is one of the most important factors for railway bridge vibration. The repeated forces with equidistant axles cause the magnification of dynamic responses which relates with maintenance of the track structure and structure-borne noises. The noise problem is one of the most important issues in services of light rail transit system which usually passes through towns. In the present study, The vibration and noise of the LRT bridge will be investigated with utilizing dynamics responses from moving train as input data for noise analysis.

• Journal of the Korean Society of Safety
• /
• v.31 no.5
• /
• pp.89-94
• /
• 2016

The objective of this study was to estimate the dynamic behavior of a personal rapid transit(PRT) track system using a rail of rectangular tube section and a rail joint of sliding type, and to compare the results with the normal rail and rail joint of a PRT track system by performing field measurements using actual vehicles running along the service lines. The measured vertical displacement of rail and sleeper, and vertical acceleration of rail for the normal rail and rail joint section were found to be similar, and the rail joint of sliding type satisfied the design specifications of the track impact factor for a conventional railway track. The experimental results showed that the overall dynamic response of the rail joint were found to be similar to or less than that of the normal rail, therefore the rail joint of sliding type for PRT track system was sufficient to ensure a stability and safety of PRT track system.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.191-196
• /
• 2007

This paper is reviewed RAM(Reliability, Availability and Maintainability) data table utilized for RAM data management to Urban Maglev Transit. As railway systems become more complex, the RAM requirements are reinforced to ensure that a design meets Reliability, Availability, Maintainability criteria. Therefore, it needs the efficient management for RAM data of railway system to meet RAM target. At this study, RAM data management format is suggested to ensure reliability and maintainability based on acquired experience for overseas rolling stock. This RAM data table and FMECA(Failure Mode Effect Criticality Analysis) table are useful to the calculation of MTBF(Mean Time Between Failure), MTBSF(Mean Time Between Service Failure) and Maintainability. Also, this RAM management table will be efficient to improve the RAM evaluation to Urban Maglev Transit.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.447-451
• /
• 2009

Metropolitan rapid transit has been used by one of a main transport service for several decades, but there are no monitoring system for electrical equipment condition which can cause enormous economic loss and social problem if fault occurs. Recently, necessity of condition monitoring system for electrical equipment fault came to the fore, we became carrying out a research project for a design of electrical equipment lifetime estimation system for metropolitan rapid transit. In this paper, basic design result of condition monitoring system and specification of transformer partial discharge detection system are presented, which are part of entire lifetime estimation system. Definition of target apparatus and monitoring method determined by analysis of user requirement from each railway company and, each railway company's opinions and requests were collected sufficiently by surveys and discussion.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1451-1453
• /
• 2000

The automatic/driverless operation which are great important techniques in metro railway are required to increase higher safety, greater reliability, and transport capacity. To satisfy such demands, we must have the system design and testing technique for the railway system operation. These techniques are related to the onboard train control and communication systems which include TCMS(Train Control and Monitoring System), ATO(Automatic train Operation), ATC(Automatic train Control), and TWC(Train to wayside communication). These sub-systems must be interfacing with not only each others but also the signal system on the ground. We tested the train control system on the 7 line that has been developed on the basis of the standardized type EMU for korea railway systems.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.510-515
• /
• 2005

Since 1974, the first subway is constructed in Seoul metropolitan area, from 1985 country metropolitan subways have been built. But most country metropolitan subways cannot reach the goal of transportation sharing ratio and show a loss. In this paper, I investigate the issues of country metropolitan subways and present the methods to improve them focusing on strengthening transit network. At first, it is introduced that the method can complement incomplete network from insufficient subway lines. And I propose the consolidation method using KORAIL railway lines. Finally, the connecting method into subway missing area is presented with various transit systems like BRT, Guideway Bus and single railway line extension.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.1045-1050
• /
• 2005

A set of design factors that should be considered during rail transit system development in proposed. As the current trend in the rail transit development emphasizes its role as a medium through which the interaction between the city environment and people takes place, the factors of harmony, color, characteristics, identity, and communication should be considered in the railway design. It's important to ensure that there exist harmony between the design and the civic environment, the influence of color on people is properly considered, the car design possesses distinct characteristics, and that the sense of common identity as well as effective communication is fostered between the system and people it serves. Several cases from various countries are presented to illustrate the points raised in the paper.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.47.1-52
• /
• 2002

According to the current eligibility criteria in Korea, only cities with populations of more than one million are eligible to carry out urban rail transit construction projects. This paper suggests measures for improving such systems by reviewing current eligibility criteria for the construction of urban rail transit including subway and LRT in Korea.