• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.68.4-68
• /
• 2002

$\textbullet$ This report presents an implementation a set of reusable software components which use of fault-tolerance embedded controller for railway signalling systems. These components can be used in real-time applications without application reprogramming. $\textbullet$ This library runs under VxWorks operating system and is oriented on real-time embedded systems. The library includes fault detection, fault containment, checkpointing and recovery components. $\textbullet$ The library enables to support high-speed response to fault occurrence in application software. Garbage collector together with VxWorks Watchdog provides both dead tasks detection and useless resources removing to avoid an overflow. Control flow...

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1073-1074
• /
• 2008

Compatibility concerns between train signalling systems and rolling stock are a significant problems to cross-acceptance of rolling stock in urban railway system. It is not possible to establish general rules for the maximum levels of interference allowed, valid for every country. So, in this paper, we measured conducted emission and inductive emission and analyzed results for DC rolling stock.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.341-343
• /
• 2002

According to the computerization of railway signalling equipments, the need of communication protocol for interface between these equipments is increasing. In this paper the research results on communication protocol structure for interface between LDTS(Local Data Transmission System) and EIS(Electronic Interlocking System) is represented.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(II)
• /
• pp.937-942
• /
• 2002

As the subway composed of rolling stock, power supply, signalling, infrastructure is complex system, the optimization through standardization is one of the most effective way to reduce the cost of construction and operation. However, the subway in Korea has been built and operated in different kinds of system. In this paper, review for standardization of urban transit in Korea is executed and presented direction to standardization.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.447-454
• /
• 2000

As the AGT system has never operated in Korea, the construction of test track is essential to the acquisition of safety for the passengers. However, the test track is a synthetic system including vehicle, power system, signalling, track etc, several factors must be considered. In this paper, we suggest the general guideline for the test track of AGT system and test items on test track through the investigation of leading test facilities in the world. Through continuous study and investigation, we finally will build the test track to verify the reliability requirements between the train and infrastructures

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2003년도 봄 학술발표논문집 Vol.30 No.1 (C)
• /
• pp.313-315
• /
• 2003

국내 철도신호설비들이 점차 전자화 되어감에 따라 이러한 신호제어장치간 인터페이스를 위한 표준 통신 프로토콜의 필요성이 점점 증대되고 있다. 본 논문에서는 이러한 기존의 철도신호용 프로토콜에 대한 분석을 하였다 그리고 철도신호용의 새로운 프로토콜의 설계를 위한 데이터 링크 프로토콜의 성능평가 모델을 설명하고, 이를 바탕으로 새롭게 설계된 철도신호용 통신 프로토콜에 대한 구조를 제시하고 성능평가 모델에 의한 기존의 프로토콜과 비교분석을 수행하였다. 프로토콜 평가모델에 의한 기존 프로토콜과 설계한 프로토콜의 비교결과 많은 성능개선이 있음을 확인하였다.

• 전기학회논문지
• /
• 제60권9호
• /
• pp.1715-1720
• /
• 2011

Studies suggested an increase in the competitiveness and roles of mainline railways like speed and accessibility improvement, as a fundamental direction of the National Transport Network Plan. At this point, topics presented especially for strengthening the role of human and environment centered transportation: as to the greatly improved speed competitiveness, there are an operational speed above 180km/h ~ 200km/h and traveling within 2 ~ 3 hours among big cities. As to accessibility improvement, there are accessibility to main railway stations within 30 minutes, and the improvement of accessibility, safety, eco-friendliness, amenity etc. As a part of these suggestions, field specific plans were proposed for the establishment of expressed mainline railway network in Korea such as train's, civil structures, trolley lines etc. In this paper we analyzed the conventional lines and systems to figure out whether to change details in terms of H/W of signaling system. Additionally, we reviewed the compatibility or difference of signalling system depending on train's speed. With this result, we deduced the number of virtual blocks specific to the speed of 180km/h, 200km/h and 230km/h, which were showed for the speed improvement considering each variable like blocks, braking distance etc. In this way, we suggested the railway signal system establishment plan considering safety operation.

• 전기학회논문지
• /
• 제63권5호
• /
• pp.703-712
• /
• 2014

To improve the efficiency and safety of railway systems, the train control system has been considerably evolved from the ground-equipment-based control system (e.g. track circuit, interlocking system, etc.) into the on-board-equipment-based control system. In addition, this train control system enables the rolling stock to intelligently control the trackside facilities by introducing the information and communication technologies (ICT). Accordingly, since the ICT-based train control system makes the railway system be simplified (i.e. the heavy ground-equipment can be removed), the efficient and cost-effective railway system can be realized. In this paper, we perform the feasibility test of the ICT-based train control system via a simulation. To this end, we have developed the prototypes of the on-board controller and wayside object control units which control the point and crossing gate and performed the integrated operation simulation in a testbed. In this paper, before the field test of the on-board-controller-based train control system, we perform the Consecutive operation test for prototypes of the on-board controller, wayside object control units and local control computer.

• 한국산학기술학회논문지
• /
• 제18권11호
• /
• pp.31-45
• /
• 2017

철도 분야에서의 최근 수년간의 사고 통계에 의하면, 관련 기술 발전과 안전정보 관리시스템의 구축으로 사고발생 빈도가 현저히 줄고 있다. 그럼에도 불구하고 운영 및 유지보수에서의 오류와 안전설계에서의 결함으로 인한 사고는 지속적으로 발생하고 있다. 이에 따라 철도사고를 예방하기 위해, 철도차량 개발 시 안전성을 고려하는 설계 및 제작을 위한 지침이 작성되었고, 이와 더불어 안전 설계에 대한 독립적인 안전성평가의 수행에 대한 요구가 제시되었다. 이를 충족시키기 위해 철도시스템 개발업체는 안전성 활동 산출물인 Safety Case를 작성해야 한다. 이에 따라 Safety Case의 주요 항목 중 하나인 안전성 적용조건 (SRAC: Safety-Related Application Conditions)의 도출 및 관리에 대한 중요성이 커지고 있다. 지금까지 보고된 SRAC에 관한 연구 결과에서는 도출 절차의 간략성과 설계단계에서의 특정 안전성 활동 분석 방법에만 초점을 맞추고 있다. 이러한 방법은SRAC 항목 들을 빠르게 도출 할 수 있는 장점이 있지만, 안전성 측면에서 고려되어야 할 중요한 항목들이 누락될 위험이 존재한다. 이러한 문제를 해결하기 위하여 본 논문에서는 시스템 수명주기 전반에 걸쳐 안전성 설계 및 안전성 평가 활동을 수행하고 이를 기반으로 SRAC의 도출방법의 개선 방안을 제안한다. 이렇게 함으로써 SRAC를 보다 체계적으로 도출 및 관리를 수행할 수 있는데, 특히 설계 초기단계에서부터 SRAC를 고려함으로써 안전성 요구사항을 최대한 반영한 안전설계가 가능하다. 또한 철도신호시스템에 대한 적용사례 연구를 통하여 본 논문에서 제시하는 방법이 시스템 수명주기 전체에 걸쳐 SRAC를 고려함으로써 중요한 안전성 관련 항목들의 누락이 줄어들 수 있음을 보여준다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1174-1181
• /
• 2011

This paper investigates the current established preventive maintenance and its corresponding data on a point machine among railway signalling facilities and suggests a part of considerable plans when the policy of the preventive maintenance is modified. It is not appropriated to apply the optimized preventive replacement period considered with the cost simply. In that case, it is suggested that the reliability should be analyzed failure mode and effects through collecting the on-site failure data sufficiently. Then, that result can be proposed to adjust the proper criteria into the rational way by comparing the initial maintenance criteria. In this paper, the alternative way to determine the feasibility of the inspection period using failure probability is introduced.