• Journal of IKEEE
• /
• v.18 no.3
• /
• pp.313-319
• /
• 2014

The objectives of power system operations are to preserve system stability and reliability as well as to supply proper electric power. For an activation of these objectives, voltage and reactive power should be considered. There are a number of types about reactive power sources, and an insertion of shunt capacitor banks are one of the method to support bus voltage adjacent. This paper includes the design procedure to determine the hybrid type capacitor bank configurations on power system to improve stability and reliability. This procedure includes the capacitor bank capacity calculation, reactor type selection, and reactor capacity calculation. The total capacity calculation of capacitor bank is based on the reactive power margin which is calculated through system studies such as, contingency analysis and Q-V analysis. In the second step, the reactor type and its capacity can be determined through the harmonic analysis. This paper shows that the harmonics are decreased by the proposed hybrid type capacitor bank, especially 5th and 7th harmonics.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.2
• /
• pp.379-387
• /
• 2017

As the average load factor of High-Speed Rail (HSR) trains increased up to 98%, it caused uncomfortable crowdedness in the cabin and deteriorated the level of service to the HSR users. In this paper, we estimated the willingness-to-pay (WTP) of the HSR users for mitigating the crowdedness in the cabin. The contingent valuation method based on the stated preference data was used and the tobit model was applied for the estimation of WTP. It can be concluded that WTP for mitigating the crowdedness in the HSR trains is proportional to the congestion level of train and income level of user. Males, first-class users, not-assigned ticket users, and monthly pass users have relatively higher WTPs, while homemakers, travelers in weekends, commuters and leisure travelers have relatively lower values. The results can provide the fundamental information to estimate the benefits of mitigating crowdedness or the magnitude of governmental subsidy to railway operators for additional introduction of HSR trains.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.5 no.4
• /
• pp.569-579
• /
• 2013

A steel-type breakwater that uses a submerged dual horizontal porous plate was originally proposed by Kweon et al. (2005), and its hydrodynamic characteristics and design methodology were investigated in a series of subsequent researches. In particular, Kweon et al. (2011) proposed a method of estimating the vertical uplift force that acts on the horizontal plate, applicable to the design of the pile uplift drag force. However, the difference between the method proposed by Kweon et al. (2011), and the wave force measured at a different time without a phase difference, have not yet been clearly analyzed. In this study, such difference according to the method of estimating the wave force was analyzed, by measuring the wave pressure acting on a breakwater model. The hydraulic model test was conducted in a two-dimensional wave flume of 60.0 m length, 1.5 m height and 1.0 m width. The steepness range of the selected waves is 0.01~0.03, with regular and random signals. 20 pressure gauges were used for the measurement. The analysis results showed that the wave force estimate in the method of Kweon et al. (2011) was smaller than the wave force calculated from the maximum pressure at individual points, under a random wave action. Meanwhile, the method of Goda (1974) that was applied to the horizontal plate produced a smaller wave force, than the method of Kweon et al. (2011). The method of Kweon (2011) was already verified in the real sea test of Kweon et al. (2012), where the safety factor of the pile uplift force was found to be greater than 2.0. Based on these results, it was concluded that the method of estimating the wave force by Kweon et al. (2011) can be satisfactorily used for estimating the uplift force of a pile.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.64-71
• /
• 2010

It is suggested that the service life of the continuous welded rail(CWR) is estimated by the relationship between the rail surface irregularity according to the accumulated passing tonnage and bending fatigue of welded part in CWR. In this study, based on the results of bending fatigue tests of rail and results of measuring tests in situ of rail bending stress, this study estimated the bending fatigue life of welded rail in concrete track, adopting a Haibach's rule. The bending fatigue life of CWR considered the rail surface irregularity, train speed and the S-N curve by types of rail welding. In addition, this study estimated it for the fracture probability 1%, 0.1%, 0.01%. Therefore, this study proposed bending fatigue life of CWR in concrete track.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1541-1550
• /
• 2007

A subway is one of many public transportation means that contributes toward our society including seoul and offering of its service and expression of various information are in need due to users high demand. And there are various class of users. For that reason an optical communication network in the general contorl center and station buildings was installed. Considering the importance of safe operation of subway, optical communication exists to enhance customer satisfaction. Safe operation is essential as its level of reliance accounts for about 95%. this paper will look for ways to promote mutual information interchange and operation know-how with systems of the same kind and sharing a capable of effective operation of systems in place. Optical communication network in the metropolis railroad accepts various kinds of control networks and data networks for train operation. As occasion demands, this paper presents effective application scheme and specialized organization about an optical communication operating system.

• Journal of Korean Society of Steel Construction
• /
• v.11 no.3 s.40
• /
• pp.281-290
• /
• 1999

For many decades, the railway was constructed using tracks with jointed rails of relatively short lengths in accordance with rolling and handling technology. The joints cause many drawbacks in the track and lead to significant maintenance cost. So, railroad engineers became interested in eliminating joints to increase service loads ana speeds by improving rolling, welding, and fastening technology. Continuous welded rail(CWR) track has many advantages over the conventional jointed-rail track. But, in the case of the elimination of rail joints, it may cause the track to be suddenly buckled laterally by thermal loads. In this paper, CWR track model and CWRB program are developed for linear buckling analysis using finite element method. Rail element with a total of 14 degrees of freedom is used. The stiffness of the fastener, tie, and ballast bed are included by a set of spring elements. The investigation on the buckling modes and temperature of CWR track is presented.

• Journal of the Korean Society of Safety
• /
• v.31 no.1
• /
• pp.19-24
• /
• 2016

Rubber parts are widely used in many applications such as dampers, shock absorbers, and seals used in railway and automotive industries. Much research has thus far been conducted on property estimation and life prediction of rubber parts. To predict the service life of rubber parts at room temperature, most prior work adopts the well-known Arrhenius model that needs the accelerated life test in high-temperature conditions. However, they may not reflect the actual conditions of use that rubber parts are usually used under a specific strain condition during long period of time. In this context, we propose a method for the life prediction of rubber parts in actual conditions of use. The proposed method is based on the accelerated life test using stress relaxation during which three relatively high elongation percentages (100%, 200%, and 300%) are applied to the rubber specimens. Rubber specimens were prepared in accordance with KS M 6518 standard and three stress relaxation testers were fabricated for actual experiments. Finally, a inverse power model for life prediction was derived from experimental results. The predicted life was compared with the actual test life for validation.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1229-1234
• /
• 2009

The rolling stocks of KORAIL are KTX, Saemaulho Multiple Unit(PP), New Electrical Locomotive(DL), Electrical Locomotive(EL), Diesel Locomotive, Metropolitan Commuter Train(CDC), VVVF and Resistance Controlled Multiple Unit, etc. EMU with the maximum speed of 150km/h is under the test run at the moment. Electrical Multiple Units for mainlines with 180km/h speed are supposed to be introduced as a substitute for Saemaulho Multiple Unit which is scheduled to be out of service. But the specification standard for the control board design of train driver's cab does not exist and there is no a study for layout and type of controlling device with driver's ergonomical approach. That's why the types of controller and operating are different from rolling stocks, which has high possibility of driver's human error and needs education whenever a new car comes in. Based on the opinion poll of drivers, design specification of safety engineering and ergonomics for controlling devices and safety facilities can improve exact control for devices and deal quickly with an emergency so as to improve rolling stock safety and operational efficiency.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.860-865
• /
• 2009

This thesis deals with application of Windows CE for Embedded System and the development methode of "Speed Gate Controller Tester" taking advantage of development program. We can improve reliability, stability and convenience of maintenance work as use of "Speed Gate Controller Tester" which was developed and applied "Embedded System" We can provide customers with more qualified service naturally because of the higher rate of operation which makes people use more pleasant and comfortable subway facility. And also it is possible to manage processor, time schedule and hardware resource as application of Embedded System and Windows CE. Embedded System applied OS Windows CE makes it possible to develop other various products, another application of equipment and tester. Thus this paper treats problems the moment developed and the present condition, development process, field application results.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1479-1485
• /
• 2008

This paper shows the result of study on the detailed applicable procedure of software Escrow account applied for rolling stock. The customer as end-user requires software source code, related critical technical documents etc. about software based system of train for maintenance purpose through software modification and enhancement after completion of warranty period. Otherwise, it is not easy to keep up with the customer's requirement of demanding supplier's exclusive information because it is considered as intellectual property rights of supplier as software developer. Therefore, the main contractor(normally called as Car-builder) need to introduce software Escrow service in order to coordinate the different a standpoint between software developer and end-user. Software Escrow is a legal arrangement in which an software Escrow packages (software source code, software development tool, build process, proprietary information, copyright and etc.) is deposited into and Escrow account under the trust of a reliable third party (Escrow agent) depending on mutual agreement on Escrow contract condition as signing off Escrow agreement document. This paper deals with the study on the detailed procedure about the following general category of Escrow procedure and purpose to apply this specific procedure of Escrow into the future project onward.