• Wind and Structures
• /
• 제20권2호
• /
• pp.213-236
• /
• 2015

For high-speed railways (HSR) in wind prone regions, wind barriers are often installed on bridges to ensure the running safety of trains. This paper analyzes the effect of wind barriers on the running safety of a high-speed train to cross winds when it passes on a bridge. Two simply-supported (S-S) PC bridges in China, one with 32 m box beams and the other with 16 m trough beams, are selected to perform the dynamic analyses. The bridges are modeled by 3-D finite elements and each vehicle in a train by a multi-rigid-body system connected with suspension springs and dashpots. The wind excitations on the train vehicles and the bridges are numerically simulated, using the static tri-component coefficients obtained from a wind tunnel test, taking into account the effects of wind barriers, train speed and the spatial correlation with wind forces on the deck. The whole histories of a train passing over the two bridges under strong cross winds are simulated and compared, considering variations of wind velocities, train speeds and without or with wind barriers. The threshold curves of wind velocity for train running safety on the two bridges are compared, from which the windbreak effect of the wind barrier are evaluated, based on which a beam structure with better performance is recommended.

• Geomechanics and Engineering
• /
• 제20권4호
• /
• pp.323-331
• /
• 2020

Pile foundation is widely used for railway bridges in loess throughout northwestern China. Modeling of the loess-pile interaction is an essential part for seismic analysis of bridge with pile foundation at seismically active regions. A quasi-static test is carried out to investigate the hysteretic behaviors of pile foundation in collapsible loess. The failure characteristics of the bridge pile-loess system under the cyclic lateral loading are summarized. From the test results, the energy dissipation, stiffness degradation and ductility of the pile foundation in loess are analyzed. Therefore, a bilinear model with stiffness degradation is recommended for the nonlinearity of the bridge pier-pile-loess system. It can be found that the stiffness of the bridge pier-pile-loess system decreases quickly in the initial stage, and then becomes more slowly with the increase of the displacement ductility. The equivalent viscous damping ratio is defined as the ratio of the dissipated energy in one cycle of hysteresis curves and increases with the lateral displacement.

• Structural Monitoring and Maintenance
• /
• 제6권3호
• /
• pp.255-268
• /
• 2019

Civil infrastructures, such as bridges and tunnels are most important assets and their failure during service will have significant economic and social impact in any country. Behavior of a bridge can be evaluated only through actual monitoring/measurements of bridge members under the loads of interest. Theoretical analysis alone is not a good predictor of the ability of a bridge. In some cases, theoretical analyses can give less effect than actual since theoretical analyses do not consider the actual condition of the bridge, support conditions, level of corrosion and damage in members and connections etc. Hence actual measurements of bridge response should be considered in making decisions on structural integrity, especially in cases of high value bridges (large spans and major crossings). This paper describes in detail the experimental investigations carried out on an open web type steel railway bridge. Strain gages and displacement transducers were installed at critical locations and responses were measured during passage of locomotives. Stresses were evaluated and extrapolated to maximum design loading. The responses measured from the bridge were within the permissible limits. The methodology adopted shall be used for assessing the structural integrity of the bridge for the design loads.

• Advances in Computational Design
• /
• 제8권1호
• /
• pp.1-12
• /
• 2023

To consider the effects of the increasing speed of next-generation high-speed trains, the existing traffic safety code for railway bridges needs to be improved. This study suggests a numerical method of evaluating the new effects of this increasing speed on railway bridges. A prestressed concrete (PSC) box bridge with a 40 m span length on the Gyeongbu track sector is selected as a representative example of high-speed railway bridges in Korea. Numerical models considering the inertial mass forces of a 38-degree-of-freedom train and the interaction forces with the bridge as well as track irregularities are presented in detail. The vertical deflections and accelerations of the deck are calculated and compared to find the new effects on the bridge arising with increasing speed under simply and continuously supported boundary conditions. The ratios between the static and dynamic responses are calculated as the dynamic amplification factors (DAFs) under different running speeds to evaluate the traffic safety. The maximum deflection and acceleration caused by the running speed are indicated, and regression equations for predicting these quantities based on the speed are also proposed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.311-318
• /
• 2001

The CWR, when installed on the bridge, may introduce extra responses in displacement, stress etc. due to the expansion of bridge girders. To release these responses, a special concern must be put on the CWR on bridges, especially for the long span bridges. Since the risk of derailment of vehicle due to buckling or breakout of the rails on bridges is of importance, the establishment of appropriate guidelines to check the performance of CWR on bridges is crucial for safe operation of train. In this study, using the program CWRAP, specialized for response of rails on bridges, several schemes for constructing CWR on bridges are suggested. In audition, a special concern is given to the bridge with sharp curve which is vulnerable to buckling due to temperature loads.

• 한국방재학회 논문집
• /
• 제10권6호
• /
• pp.27-34
• /
• 2010

최근 친환경 운송수단인 고속철도에 대한 관심이 증가하고 있으며, 그에 따른 고속철도 교량이 많이 건설되고 있다. 하지만 기존의 일반 철도 교량에 비해 고속철도 교량은 고속주행하는 열차의 동적 하중에 의한 영향이 증가하게 되므로, 이에 대한 고려가 필요한 실정이다. 따라서 본 연구에서는 고속주행하는 열차의 주행 안정성을 확보하기 위해 고속철도 교량의 구조물-궤도 상호작용 및 동적 안전성을 동시에 고려하여 설계하는 방법을 제안하였고, 제안한 알고리즘의 효율성을 입증하기 위하여 기존의 재래식 설계에 의하여 설계, 시공되어진 단순 5경간 250 m 교량을 대상으로 수치해석을 수행하여 비교하였다. 수치해석 결과, 교량-궤도 상호작용 및 교량-차량 상호작용을 동시에 고려한 최적설계가 기존의 제안된 여러 설계 방법들과 비교했을 때, 최적화의 목적함수로 설정한 생애주기비용이 가장 경제적임을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제59권4호
• /
• pp.703-718
• /
• 2016

Masonry arch bridges present a large segment of Iranian railway bridge stock. The ever increasing trend in traffic requires constant health monitoring of such structures to determine their load carrying capacity and life expectancy. In this respect, the performance of one of the oldest masonry arch bridges of Iranian railway network is assessed through field tests. Having a total of 11 sensors mounted on the bridge, dynamic tests are carried out on the bridge to study the response of bridge to test train, which is consist of two 6-axle locomotives and two 4-axle freight wagons. Finite element model of the bridge is developed and calibrated by comparing experimental and analytical mid-span deflection, and verified by comparing experimental and analytical natural frequencies. Analytical model is then used to assess the possibility of increasing the allowable axle load of the bridge to 25 tons. Fatigue life expectancy of the bridge is also assessed in permissible limit state. Results of F.E. model suggest an adequacy factor of 3.57 for an axle load of 25 tons. Remaining fatigue life of Veresk is also calculated and shown that a 0.2% decrease will be experienced, if the axle load is increased from 20 tons to 25 tons.

• 한국안전학회지
• /
• 제16권2호
• /
• pp.130-135
• /
• 2001

고속 전철 특징 중의 하나인 장대 레일의 사용으로 인하여 발생하는 추가 응력과 변위에 대하여 대만 고속전철 교량에 대해서 검토한다. 또한 대만 고속 전철 교량 시방 규정의 중요한 특징인 사용지진을 레일-구조물 해석에 고려하도록 하는 규정을 적용 후 단순교의 응력 및 상대변위를 검토한다. 지진 시 지반 운동을 고려하며, 단순교의 지진 응답을 변위로 레일-구조물 상호 작용 해석에 적용시킨다. 지진하중 고려 유무에 따른 단순교의 응력 및 상대 변위를 검토한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1569-1576
• /
• 2011

To install heavy structures in the railway bridges, crane methods or launching methods using temporary structure have been applied. These methods are uneconomical because working yard is required, temporary cut of rail system, etc. In this study, various construction methods has been developed which are suitable to the filed conditions. In the case of simple span structure like plate girder bridges, the girder is loaded to troy system at the working yard and then transferred to the working place. To lift and lower the girder system, a new transfer system was developed. Different methods each for simple span bridge girder and long span girder were developed and detailed work procedures were proposed. Using these methods, the heavy structures can be installed with simple and safe work procedures and the construction cost and duration can be reduced.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1989년도 봄 학술발표회 논문집
• /
• pp.61-65
• /
• 1989

In this study, measured and calculated responses are compared in order to give how the static and dynamic responses occurred in steel railway bridges Sue to train loads could be calculated appropriately. From this, it is known that the static response ratios (measures / calculated) is high comparing to the highway blisses, and the dynamic response should be obtained by the moving mass problem. And it is known that the factors specifies in the present railway bridge code are very safe under the present service speed below 100 km/h, but are not under the rapid transit system above 100 km/h.