• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.3
• /
• pp.520-525
• /
• 2016

In this paper, Characteristic of power conversion unit of a railway vehicles according to contact loss in feeding system that applied impedance of rigid conductor is analyzed. It applied impedance of rigid bar in modeling of electric railway system. Railway vehicles are performed of modeling based on the performance of the electric railway vehicle. Effects of the contact loss in the power conversion unit were analyzed via main transformer of railway vehicle, the input and output voltage characteristics of the converter through contact loss was generated after linking the vehicle with feeding system.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1964-1969
• /
• 2008

A railway is a complex system integrated with a lot of technical elements such as rolling stock, power, signal control, communications, tracks, stations, operation control systems, and so on. As a mass transportation system, a railway could contain potential risks that may result in a high death rate and property losses. Accordingly, Railroad Safety Technology R&D Corps. is adopting the plan of the construction of Railway Safety Test Facilities as a part of the Railway Total Safety Project to enhance the railway safety, and carrying out researches on effective project management methods with Systems Engineering techniques. To support that, we propose the more effectual management method of constructing the Railway Safety Test Facilities applying the model-based systems engineering tool to the research.

• International Journal of Railway
• /
• v.1 no.1
• /
• pp.20-29
• /
• 2008

Features of procedures of dynamic synthesis are considered at use of various interpretations or models of processes in mechanical oscillatory systems. Methodological bases for research of the wave processes develop, allowing receiving some features of distribution of indignations. Authors offer scientifically-methodical bases for the decisions received analytical by.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.5
• /
• pp.1070-1077
• /
• 2013

Owing to the consistent increase in energy efficiency issues, studies for improving regenerative energy utilization have been receiving attention in the Urban DC railway systems, where currently, the utilization of regenerative energy is low due to the lack of a specific plan for using this energy. The regenerative energy in railway systems has a low efficiency problem which results in the increase of the catenary voltage and a possibility to create problems to the electrical devices connected to the system. This paper deals with the power integration of large urban railway subsystems to improve regenerative energy utilization where the railway subsystems are integrated with other railway subsystems to improve the energy efficiency. Through the case studies, to find the realistic effect of integrated operation, the Seoul Metro subsystems, namely Line 5 and Line 7, has been applied. Also, evaluation for the electricity cost saving has been performed by using KEPCO electricity cost table.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.382-387
• /
• 2009

Requirement management is an important phase that has a significant influence on the project success. As a risk to a project fail is getting bigger, people adopt Systems Engineering method to the development of the effective requirement management. Accordingly, Railroad Safety Technology R&D Corps. is progressing the plan of the construction of Railway Safety Test Facilities as a part of the Railway Total Safety Project to enhance the railway safety, and carrying out researches on effective requirement management methods with Systems Engineering techniques. To support that, we introduce the Systems Engineering Requirement Management Process and propose the more effectual management method of constructing the Railway Safety Test Facilities applying the model-based systems engineering tool to the research.

• Journal of the Korean Society of Systems Engineering
• /
• v.10 no.2
• /
• pp.43-50
• /
• 2014

The Centralized Traffic Control(CTC) System of Urban Railway is an element(subsystem) of the Urban Railway system to aim safety operation and efficient management of rolling stock in accordance with a train scheduling program in train operation ways. That's why the CTC System must be developed considering systematic and safety-guaranteed methods such as RAMS(Reliability, Availability, Maintainability, and Safety) refereed to IEC standards. The CTC System is consists of rolling stock, signaling, power supply, communication, and mechanical equipment and preforms control and remote monitoring functions. The technical activities considering safety process are very important at such an early stage of development in a railway project. This paper introduces RAMS activities and an independent safety assessment by $3^{rd}$ Party focused on a safety applied to a development of the CTC system of Urban Railway and proposes the experiences as well practices.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.541-546
• /
• 2002

Railway noise is one of the main causes of environmental impact. Whenever a new railway line is planned or a housing project near an existing railway is proposed, an estimate of the relevant levels is usually required. For this, it is necessary to quantify those parameters that affect the railway noise. Therefore we investigated the noise and vibration level which 107 high speed trains generated passing through the block of test railway track between Chunan and Chungwon. This paper presents the status and characteristics of the high speed railway noise and an accurate prediction of the high speed railway noise.

• Journal of Applied Reliability
• /
• v.15 no.1
• /
• pp.19-26
• /
• 2015

The amended law of railway safety in Korea has recently come into effect in order to strengthen the railway safety management system. The new law, which took effect March 1, 2014, will implement stricter oversight of railway companies. As a result, a company that manufactures railroad system or components for domestic use must obtain an approval in accordance with the technical specifications of manufacturer approval. Although Korea had established the legal system in enforcing railway safety, the government wants the companies continue to develop the more improved safety systems until they gain competitive edge on the world class railway manufacturers. This paper presents an in-depth analysis of the technical specifications for manufacturer approval in International Railway Industry Standard (IRIS), which is the global standard. This paper also proposes measures and guidelines that would help Korean manufacturers those who want further develop their safety management systems, as a prerequisite for them to obtain the manufacturer approval.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.356.2-356
• /
• 2002

Railway noise is one of the main causes of environmental impact. Whenever a new railway line is planned or a housing project near an existing railway is proposed, an estimate of the relevant levels is usually required. For this, it is necessary to quantify those parameters that affect the railway noise. Therefore we investigated the noise and vibration level which 107 high speed trains generated passing through the block of test railway track between Chunan and Chungwon. This paper presents the status and characteristics of the high speed railway noise and an accurate prediction of the high speed railway noise.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1367-1372
• /
• 2000

Recently, many new constructuion and large scale modification of railway are performed for cost down of goods delivery charge and effective transportation in various aspect. Although railway traffic is environmentally frendly in many part but weak in noise and vibration problem. For the reduction and efficient management of railway noise, first of all prediction of railway noise is necessarily requisted. In domestic and abroad many studies for prediction of railway nearby noise are done. In this study simple modelling technique is investigated for railway noise prediction when railway passes above elevated concrete bridge as well as ground. Predicted results are compared with measured results and it is known that suggested modelling technique can be used for more precise prediction of railway nearby noise.