• 소음진동
• /
• 제8권2호
• /
• pp.289-296
• /
• 1998

To predict the noise propagation from an elevated railway, sound radiation characteristics of elevated structure are measured by using the sound intensity method. In the base of the results, we propose the source model of elevated structure noise and the calculation model for elevated railway noise. Acoustic model of the former is modeled a row of single sources with directivity cos .theta. positioned in the center of a bogie and arranged in the lower side of slabs. Also prediction model is presented with rolling noise and elevated structure noise calculated by considering the power level of a source for one-third octave band, ground absorption and barrier deflection. Noise level unit patterns of a passing train is calculated based on this model and the results are compared with available field data.

• 한국소음진동공학회논문집
• /
• 제18권5호
• /
• pp.524-532
• /
• 2008

This paper presents yaw vibration control performances of railway vehicle featuring controllable magnetorheological damper. A cylindrical type of MR damper is devised and its damping force is evaluated by considering fluid resistance and MR effect. Design parameters are determined to achieve desired damping force level. The MR damper model is then incorporated with the governing equations of motion of the railway vehicle which includes vehicle body, bogie and wheel-set. Subsequently, computer simulation of vibration control via proportional-integral-derivative(PID) controller is performed using Matlab. Various control performances are demonstrated under external excitation by creep force between wheel and rail.

• 대한기계학회논문집A
• /
• 제33권11호
• /
• pp.1320-1325
• /
• 2009

The sources of the vibration of railway vehicles in the cabin are usually bogie, axle, and wheel. The vibrations are transmitted through the floor structures of railway vehicle. The floor structure is the combination of bottom plate, plywood, and rubber. In this research the vibration transmission is measured experimentally and analyzed numerically to find the transmission characteristics of the vehicle floor structures. The result shows that the vibration characteristic of soft rubber is better than hard rubber or wood as the connecting material between the bottom plate and the plywood.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.951-956
• /
• 2008

The study is to develop a foundation design for a railway vehicle simulator using a scaled model. Although a scaled simulator is limited to manipulate the dynamics of a full-size railway vehicle, it has been known to have an advantage, since a scaled model could provide the fundamental dynamic behavior within a limited space of a laboratory facility and with a low operation cost while an experiment is conducted. This study is to propose a design strategy for a simulator so that a small scaled roller rig could be fabricated in a laboratory based on the design philosophy. The data obtained from the scale model is also experimentally investigated in conjunction with appropriate non-dimensional analysis so that the output results should be interpreted to the railway vehicle.

• 한국CDE학회논문집
• /
• 제12권4호
• /
• pp.308-320
• /
• 2007

A multi-agent and web based engineering framework concerning the automation of fatigue durability analysis for welded bogie frame of railway vehicles is presented. Mostly, this kind of design or analysis includes complex workflow, huge amounts of information processing, and problem solving. Macro programs of I-DEAS, APDL of ANSYS, and in-house fatigue code are utilized for parametric geometry representation, automatic mesh generation, static stress analysis, fatigue durability analysis, post-processing, and data sorting. The engineering framework is implemented on the JADE. Since every task requires a fairly complex process and specialized knowledge, the multi-agent based framework is very useful to keep the independency among several disciplines or tasks and to use distributed hardware and software resources. All engineering programs are integrated by XML wrapper. Related database of the engineering framework and web based user interfaces are also developed. A parametric study is carried out to take into account the effect of geometrical change of transom support bracket on its cumulative fatigue damage. The developed engineering framework reduced remarkably the time and costs required in designing and solving engineering problems.

• Structural Engineering and Mechanics
• /
• 제46권5호
• /
• pp.713-734
• /
• 2013

Bridges are vital components of the railroads. High speed of travel, the periodic and oscillatory nature of the loads and the comparable vehicle bridge weight ratio distinguish the railway bridges from the road bridges. The close proximity between estimations by some numerical methods and the measured data for the bridge-vehicle dynamic response under the moving load conditions has boosted the confidence in the numerical analyses. However, there is hardly any report regarding the responses of the railway bridges under the effect of the trains entering from the opposite directions while running at unequal speed and having dissimilar geometries. It is the purpose of this article to present an analytical method for the dynamic analysis of the railway bridges under the influence of two opposing series of moving loads. The bridge structural damping and many modes of vibrations are included. The concept of modal superposition is used to solve for the system motion equations. The method of solution is indeed a computer assisted analytical solution. It solves for the system motion equations and gives output in terms of the bridge deflection. Some case studies are also considered for the validation of the proposed method. Furthermore, the effects of varying some parameters such as the distance between the bogies, and the bogie wheelset distance are studied. Also, the conditions of resonance and cancellation in the dynamic response for a variety of vehicle-bridge specifications are investigated.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2635-2643
• /
• 2011

Current freight electric locomotives (132 ton) of the eco-friendly and can carry large cargo logistics as a means of generation has increased the demand at home and abroad. Especially, Freight electric locomotives to increase the traction, it is easy to mass and rapid transport. In addition, Freight electric locomotives is no exhaust and low noise compared to diesel -electric locomotives and it can be eco-friendly transportation. CO_CO BOGIE of Freight electric locomotives has no the center pivot and Traction_Rod and Spring of CO_CO BOGIE is mounted on the body. These freight electric locomotives to be satisfied with the safety regulations. Carbody development satisfied Implementation of optimum body and collision is the focus. Accordingly, the different approach in the upper and lower carbody structure and interior and equipment placement is needed. On this paper, the contents give explanation of cases on carbody design composed of freight electric locomotives now developed and process of improvement by structure analysis and collision analysis.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.804-810
• /
• 2004

Tilting train can pass curve at higher speed without affecting passenger comfort by tilting Carbody. But the centrifugal force proportional to square of velocity increases the track lateral force. This is the one of the problems to be solved when applying tilting train. The one countermeasure we selected the light weight design by applying distributed traction EMU system and light weight materials such as FRP. The other countermeasure was to adopt steering bogie concept in order to reduce the guiding force on Curve track. This paper describes the design study of self steering mechanism applied to the Bogie for 180 km/h Korean Tilting Train(TTX), which was done as a part of the Korean National R&D project.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.619-625
• /
• 2004

Tilting system allow the train to pass curve at higher speed without affecting passenger comfort. As the tilting trains offer the optimum means of providing faster and more comfortable rail service with minimum of environmental disturbance and capital investment. more than 14 countries have now adopted or are about to adopt tilting train technology. The Korean National Railroad is also planing to apply faster tilting train to the areas where the high speed rail service are not provided. This paper describes the parametric study to achieve the optimal suspension design of tilting bogie for 180 km/h Korean Tilting Train(TTX), which was done as a part of the Korean National R&D project.

• 한국기계연구소 소보
• /
• 통권15호
• /
• pp.5-17
• /
• 1985

Dynamics of railway vehicles are strongly influenced by the wheel/rail contact forces. Wheel/rail contact geometric characteristics are important parameters to determining wheel/rail contact forces. In general, geometric relations between wheel and rail are represented by nonlinear functions of the wheelset lateral excursion and the relative yaw angle. There are some analytical and experimental studies to show the influences of the wheelset lateral displacement on wheel/rail geometric relations. Recently radial steering bogie which is designed to have flexible yaw motions of wheelsets was developed to improve curve negotiation performance. The radial steering bogie makes it important problem to study the effects of wheelset yaw motion on wheel/rail geometric relations. This paper describes the method to analyze 3-dimensional wheel/rail contact geometry considering wheelset yaw motion and describes also some computer simulation results.