Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Vibration Transmission of Railway Floor Structure due to Connecting Materials

연결재료에 따른 철도차량 바닥구조의 진동전달

  • Published : 2009.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

The sources of the vibration of railway vehicles in the cabin are usually bogie, axle, and wheel. The vibrations are transmitted through the floor structures of railway vehicle. The floor structure is the combination of bottom plate, plywood, and rubber. In this research the vibration transmission is measured experimentally and analyzed numerically to find the transmission characteristics of the vehicle floor structures. The result shows that the vibration characteristic of soft rubber is better than hard rubber or wood as the connecting material between the bottom plate and the plywood.

Keywords

References

  1. Lee, Y. S., Kim, Y. W., 1992, 'Analysis of Nonlinear Vibration for Hybrid Composite Plates,' Journal of the KSME, Vol. 16, No. 12, pp. 2306-2314
  2. Kim, C. H., Park, T. H., Shin, H. J., 1993, 'Vibration and Damping Characteristics of Viscoelastically damped sandwich Plates,' Journal of the KSME, Vol. 17, No. 9, pp. 2252-2263
  3. Park, E. S., Bhak, S. M., Park, M. K., Park, S. K., 1995, 'A Study on the Characteristics of Vibration Damping of a Beam with Inserted Viscoelastic Layer,' Conference of KSME, pp. 22-27
  4. Min, K. W., Ho, K. C., Hwang, S. H., Kim S. C., Joung, J. W., Lee, K. M., 2000, 'Dynamic Characteristics of Small-Scale Layered Rubber Bearings for the Vibration Reduction of Structures,' Conference of KSME, pp. 173-178
  5. Hong, D. K., Seo, J., Ahn, C. W., 2001, 'A Study on the Impact and Vibration Acting on the Laminated Composite Honeycomb Core Type Sandwich Plate Structure,' Conference of KSME, pp. 616-622
  6. Woo, K. J., Park H. J., 2006, 'Study on the Vibration Reduction Characteristics of Floating Floors used in Railway Vehicles,' Conference of KSR, pp. 44-48
  7. Binod P. Yadav, 2008, 'Vibration Damping using Four-Layer Sandwich,' Journal of Sound and Vibration, Vol. 317, pp. 576-590 https://doi.org/10.1016/j.jsv.2008.03.072
  8. Lee, R. M., Lee, P. H., Lee, S. W., Koo, J. C., Choi, Y. S., 2008, 'Dynamic Analysis of Railway Vehicle using Mathematical Modeling of High-Speed EMU,' Conference of KSR, pp. 1426-1434