• 제목/요약/키워드: Railroad transportation

검색결과 831건 처리시간 0.031초

시계열 및 회귀분석을 활용한 휘발유가격의 광역권별·수단별 대중교통수요 영향력 비교분석 (An Impact of Gas Prices on Transit Demand Using a Time-series Analysis and a Regression Analysis)

  • 이광섭;엄진기;문대섭;양근율;이준
    • 대한교통학회지
    • /
    • 제32권1호
    • /
    • pp.13-26
    • /
    • 2014
  • 국내에서 소비되는 에너지의 대부분을 해외에 의존하고 있는 우리나라는 교통부문에서도 에너지 절감을 위해 많은 노력을 하고 있다. 휘발유가격과 교통수요와의 관계는 국내외적으로 꾸준히 연구되어 왔으나 국내 선행연구는 승용차 및 수도권 중심으로 연구되어 왔다. 본 연구에서는 휘발유가격이 대중교통수요에 미치는 영향을 분석하며 월별 자료를 활용하여 대중교통 수단별(버스, 도시철도) 및 광역권별(수도권, 부산, 대전, 대구, 광주)로 실증적으로 비교분석했다. 분석을 위해 시계열모형과 다중회귀모형을 사용하였으며 회귀모형의 계수를 활용하여 유가에 대한 대중교통 수요의 탄력성을 비교하였다. 유가에 대한 수요탄력성이 버스보다 도시철도가 높게 나타났고, 대중교통체계가 잘 갖춰진 수도권보다 승용차 의존적인 지방 광역권이 유가에 더 민감한 것으로 나타났다.

철도건널목의 사고예측모형 개발에 관한 연구 (Developing An Accident Prediction Model for Railroad-Highway Grade Crossings)

  • 강승규
    • 대한교통학회지
    • /
    • 제13권2호
    • /
    • pp.43-58
    • /
    • 1995
  • This paper discusses some of the results of investigation of railroad-highway grade crossing accidents and accident-related inventory information that was collected from the Pusan District Office of the Korean National Railroads. Established statistical techniques were applied to tabulated data to obtain an accident prediction equation that estimates the expected probability of accidents at each crossing under various grade crossing situations. It was found that the most significant factor that influences the railroad crossing accidents was flagger. The other factors were train and traffic volumes, number of tracks. crossing angle, maximum timetable train speed, algebraic grade difference, and lighting facility. No significant effects was identified with railroad crossing gates. The results of the analysis and the uses of the prediction equation for the development of warrants for safety improvements are also discussed.

  • PDF

디지털 영상을 이용한 철도선형정보 추출 (The Extraction of Alignment Information on Railroad Using Digital Imagery)

  • 이종출;차성렬;김진수;남일현
    • 한국측량학회:학술대회논문집
    • /
    • 한국측량학회 2006년도 춘계학술발표회 논문집
    • /
    • pp.271-276
    • /
    • 2006
  • Railroads made many contribution to modernization being developed so quickly as public transportation, but after middle of 20 century, its qualities are getting low because of focusing on the investment and development of cars and airplanes. Its role which is getting the excellent merits on the mass transportation, rapid transit. safety, state period, energy efficiency, and prevention of environmental pollution has been reconsidered. Element of horizontal alignment In an existing railroad line is needed as basic materials, when it will be improved or moved. If its design drawing was lost or damaged, it is impossible to recover. It is riot easy to repair for it as disasters. We must understand an existing railroad line to bring a function included a basic geography situation. In this studies we acquire, analyze. and handle the digital picture of railroads and then reappear shape of three dimension. But also we want to contribute to establish the facilities information choosing materials of existing railroad line in outputting the alignment element by reverse.

  • PDF

A Study on a Catenary Impedance Estimation Technique using Boosting Current Compensation Based on Current Division Characteristics of an AT Feeding System

  • Jung, Hosung;Kim, Hyungchul;Chang, Sang-Hoon;Kim, Joorak;Min, Myung-Hwan;An, Tae-Pung;Kwon, Sung-Il
    • Journal of Electrical Engineering and Technology
    • /
    • 제10권3호
    • /
    • pp.1370-1376
    • /
    • 2015
  • Generally, an autotransformer(AT) feeding system consists of double tracks, up and down, with the trolley wire and feeder wire of the up and down tracks connected in the sectioning post(SP). Consequently, load current or fault current flows on two tracks based on catenary impedance characteristics, making it difficult to estimate catenary impedance accurately. This paper presents a technique for the estimation of catenary impedance using boosting current compensation based on the current division characteristics of an AT feeding system to improve the operation performance of impedance relay. To verify the technique, we model an AT feeding system through a power analysis program (PSCAD/EMTDC) and simulate various operation and fault conditions. Through the simulation, we confirmed that the proposed technique has estimated catenary impedance with a similar degree of accuracy to the actual catenary impedance

Demand and Schedule Operation Mode for Personal Rapid Transit

  • Hwang, Jong-Gyu;Kim, Baek-Hyun;Kang, Seok-Won;Jeong, Rak Gyo
    • Journal of international Conference on Electrical Machines and Systems
    • /
    • 제2권3호
    • /
    • pp.356-360
    • /
    • 2013
  • The PRT (Personal Rapid Transit) system is a new transportation system in accordance with the requirements of the passengers. Although this PRT system was proposed a long time ago, it did not hold the limelight due to the several limitations in technology. However, the research and development has been active again recently thanks to the development in technology and the review on its applicability as the means of transportation linking to the urban transit system. Although most of these recent studies in relation to the PRT are focused on the hardware such as PRT vehicles or track structures, etc., the operational aspect of it is more important than that of any other means of public transportation. Therefore, among studies on operational aspect of this PRT system, this paper shows the result of study on technology in relation to the movement of vehicle to the station where it was called by the passenger through interface of the wayside control center with the vehicle control system in case where the passenger calls a vehicle at the station.

철도차량기지용 단권변압기의 전압강하에 대한 이론적 고찰 (A Theoretical Study on Voltage Drop of Auto-Transformer for Railway Vehicle Base)

  • 유기성;김재문
    • 전기학회논문지
    • /
    • 제67권12호
    • /
    • pp.1723-1728
    • /
    • 2018
  • In order to investigate the voltage drop compensation effect of AT for domestic railway vehicle base, the parameters of AT voltage drop of railroad car base are Z3 (Impedance of feeder line), Xn ( Distance from railroad vehicle to AT to SS), and Dn (distance between both ATs of railway vehicle).In addition, when installed in a SSP for a railway vehicle base, there is no AT and feeder line in the railway vehicle base except for the SSP for the main line and the SSP for the railway vehicle base, so that if zero or ignored, the AC single-phase two- It can be confirmed that it becomes a form.

지방간선노선의 철도이용과 활성화 방안 -대구.장항선을 중심으로- (A Study on Utilization Plans of Regional trunk rail route -Focused on the Daegu.janghang Line-)

  • 양준규
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 춘계학술대회 논문집
    • /
    • pp.496-504
    • /
    • 2011
  • The region trunk line railroad route undergoes an influence on a large scale in train operation systematic reorganization. This keynote of the train operation not being to the consumer and not to be is because being to the supplier. The trunk line route user of region supply change of the supplier sensitively, accepts but, the demand unit will be able to change the supply massive demanders does not become and like that to accept this back is not the railroad the mean of transportation which grudge is different a mean of transportation mainly makes use. This hits to neither the gist of GLORY promotions of the railroad public corporation which pursues the railroad use which is ordinary even in the basis of governmental policy of stock of coal small green growth and not to be is arranged. For the railroad use activation of the region trunk line route consequently and to excavate the demand hindrance element and a demand lure element the inside and the outside defines and to observe the fluctuation of use importing in existing train operation systematic fluctuation, with the user tries analyzes the instance of the overseas railroad enterprise about the process which reflects the opinion of the area and improvement under preparing boil.

  • PDF

지역특성에 따른 철도부동산 개발유형 연구 (A Study on the Development of Station Areas and Ex-railway Real Estate in Accordance with Regional Characteristics)

  • 박흥순
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2010년도 춘계학술대회 논문집
    • /
    • pp.2319-2344
    • /
    • 2010
  • Accumulated deficits resulting from managing the Korean Railroad and debts from the construction of the KTX (Korea Train Express which is a high-speed rail system) have left the Korean Railroad faced with great troubles. Since it changed into a public corporation Korail on January 1st, 2005, the Korea Railroad has been making unceasing efforts to overcome the troubles and improve its management. However, even these efforts haven't worked in the face of the improved conditions of other transportation methods such as better networks of land roads and air ways. The Korea Railroad had its revenue from its railway transportation limited, and has tried to expand its business to non-transportational areas. In some metropolitan cities, the Korea Railroad made investments in real estate by constructing station buildings based on private money. Yet, in small and medium size cities, the Korea Railroad has little particular strategic projects for business development. Recently certain small and medium size regional cities began to plan on business developments for the ex-railway land, and some small towns have developed real estate on the ex-railway land. Nevertheless, there have been no systematic case studies to classify these real estate developments.

  • PDF

GIS 기반 철도 위험물 최적수송경로도출 표준화에 관한 연구 (A Study on Standardization of Optimum Transportation Routing based on GIS for Railway HAZMAT Transportation)

  • 팽정광;김시곤;박민규;강승필
    • 대한안전경영과학회지
    • /
    • 제11권4호
    • /
    • pp.201-211
    • /
    • 2009
  • The types and quantities of Hazmat and Hazmat transportation are gradually increasing, keeping pace with industrialization and urbanization. At present the safety management for Hazmat transportation only considers reducing accident probability, but even when an accident involving Hazmat-carrying vehicles occurs, that is not regarded as a Hazmat-related accident if the Hazmats do not leak out from the containers carrying them. Thus the methods to reduce risk (Risk=Probability$\times$Consequence) have to be developed by incorporating accident probability and consequence. By using Geographic Information System (GIS), a technical method is invented and is automatically able to evaluate the consequence by different types of Hazmat. Thus this study analyzed the degree of risk on the links classified by the Hazmat transport pathways. In order to mitigate the degree of risk, a method of 7-step risk management on Hazmat transportation in railway industries can be suggested. (1st step: building up GIS DB, 2nd step: calculating accident probability on each link, 3rd step: calculating consequence by Hazmat types, 4th step: determination of risk, 5th step: analysis of alternative plans for mitigating the risk, 6th: measure of effectiveness against each alternative, and 7th step: action plans to be weak probability and consequence by the range recommended from ALARP). In conclusion, those 7 steps are used as a standardization method of optimum transportation routing. And to increase the efficiency of optimum transportation routing, optional route can be revise by verification.