• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.3
• /
• pp.27-39
• /
• 2009

The 1st Incheon Rapid Transit Line opened in October, 1999. However, the current development plans for areas near stations do not involve plans for the both urban planning and transportation together. As the focus on only the aspect of installing a new transportation mode, the developments even make the problems such as reckless development and traffic congestion gets worse. It is required to analyse status of the current land uses and land use plans in the future and consider distribution of functions of the areas near stations and aims of development plans so as to harmonize the functions of each region in view of making balance in the whole city. The aims of developments of areas near stations has to focus on the study follows steps to find and suggest aims and strategies for the revitalization plan for areas near stations with considering the both transportation and land uses together. The plans for the areas near stations of the Incheon 1st Rapid Transit Line are analysed and then the features and rational strategies are derived. The impact is analysed as applying the development strategies derived from the step into the areas near the stations of Incheon 1st Rapid Transit line.

• Journal of the Society of Disaster Information
• /
• v.10 no.1
• /
• pp.49-60
• /
• 2014

For the demand analysis of Metropolitan Train Express project, the catchment area of station should be reevaluated considering the journey speed of it. In this paper, we estimated travel mode choice model using stated preference data including Seoul metropolitan express train and compared the parameters of access/egress travel time between existing metro and Seoul metropolitan express train. The parameter of Seoul metropolitan express train is 2.5 times smaller than that of existing metro. Consequently, the catchment area can be expanded in same proportion. It can be concluded that the result of demand forecasting can be increased by 10% accommodating the expanded catchment area.

• Journal of the Korean Society for Railway
• /
• v.18 no.2
• /
• pp.94-104
• /
• 2015

Trams are rail vehicles that run on tracks along public, urban streets; they also sometimes run on separate rights of way. Tram vehicles run more efficiently and their overall operating costs are lower than those of similar vehicles. In general, trams provide a higher capacity service than buses. However, when tram stops in the middle of the road do not have pedestrian refuges, trams can cause speed reductions for other transport modes (buses, cars), as in such configurations other traffic cannot pass whilst passengers are alighting from or boarding the tram. In this study we examined the qualifications of overseas tram operation. The Railway Safety Act, sub-laws, and other relevant laws were examined to determine complementary measures.

• Journal of the Korean Society for Railway
• /
• v.17 no.4
• /
• pp.297-306
• /
• 2014

This paper analyzes Japan's consignment management of the Chosun Railway to the South Manchuria Railway. While Chosun Railway was entrusted, its management style differed significantly from that of Japan's direct management. After eight years of trust management, the direct management of Chosun Railway was returned to Japan. This of beyond border trust management is very rare. In addition, the management of Chosun Railway by South Manchuria Railway, which had an operation style similar to that of a private company, led to changes in Chosun Railway. This research analyzes the four key traits of South Manchuria Railway's consigned management. The first key trait is the initial Korean infrastructure and operation separation model. The second key trait is the international transportation and administration segregation. The third key trait is that it expanded the railway related businesses and led to the establishment of private railway companies. The fourth key trait is that the continental linked transportation was activated. Through analyses, it would be to create a comparative study of the resulting East Asian countries' operations. Furthermore, this research will in investigating the nature of Chosun Railway.

• Journal of the Korean Society for Railway
• /
• v.20 no.5
• /
• pp.637-648
• /
• 2017

In this paper, the effects of initial built-in deformation and temperature deformation on the stress distribution of discontinuous precast concrete track slab under train load were examined. According to the results, when train load is put on a precast concrete slab with initial built-in deformation and deformation due to temperature gradient, the maximum tensile stresses develop at the upper side of slab in the slab center, edge center and corner of shear pocket; the stress distribution is different from that of the case under train load only. Therefore, to accurately predict the actual weak points and failure modes, one should calculate the stress under train load considering the initial built-in and temperature deformation of the slab.

• Journal of the Korean Society for Railway
• /
• v.17 no.6
• /
• pp.457-465
• /
• 2014

This study proposes a policy for urban railway travel demand management system in order to decrease the load factor of the Seoul metro Circle line, particularly for the segment between Sadang and Samsung stations, through analyzing the transit smart card data. We propose mixed train operations of the existing Circle line and a line that goes toward Samsung station in order to transport passengers that have two distinct groups: those with the destination of Samsung station and those with destinations after Samsung station. The introduction of a mixed train operation that encourages passengers passing through Samsung station to take a Circle line train will decrease the congested load factor by 11.3% during the morning peak hours using the mixed train operation of the Circle and Samsung lines. This policy could be an effective method to decrease the load factor and improve the comfort of rail passengers without extra investment in the railway facilities.

• Smart Structures and Systems
• /
• v.19 no.1
• /
• pp.105-113
• /
• 2017

A microstructure-dependent dynamic model for silicon nanobeams with axial motion is developed by considering the effects of nonlocal elasticity and surface energy. The nanobeam is considered to subject to both transverse and longitudinal loads arising from nanostructural surface effect and all positive directions of physical quantities are defined clearly prior to modeling so as to clarify the confusions of sign in governing equations of previous work. The nonlocal and surface effects are taken into consideration in the dynamic behaviors of silicon nanobeams with axial motion including circular natural frequency, vibration mode, transverse displacement and critical speed. Various supporting conditions are presented to investigate the circular frequencies by a numerical method and the effects of many variables such as nonlocal nanoscale, axial velocity and external loads on non-dimensional circular frequencies are addressed. It is found that both nonlocal and surface effects play remarkable roles on the dynamics of nanobeams with axial motion and cause the frequencies and critical speed to decrease compared with the classical continuum results. The comparisons of the non-dimensional calculation values by present and previous studies validate the correctness of the present work. Additionally, numerical examples for silicon nanobeams with axial motion are addressed to show the nonlocal and surface effects on circular frequencies intuitively. Results obtained in this paper are helpful for the design and optimization of nanobeam-like microstructures based sensors and oscillators at nanoscale with desired dynamic mechanical properties.

• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.417-426
• /
• 2018

Piezoelectric shunt is an electric type damper capable of reducing the vibration of the structure. Vibration generated at the natural frequency of the structure are converted into electrical energy through the piezoelectric material attached to the structure. Electric energy can be dissipated by thermal energy using piezoelectric shunt composed of inductor and resistance to reduce vibration. In this paper, the equation for the optimum inductance required to reduce the vibration of the cantilever beam was examined and the vibration of the aluminum cantilever was reduced by using finite element analysis and experiments. In the finite element analysis, the mode shape and the strain energy distribution were calculated to examine the mounting position, and the vibration reduction of the cantilever was calculated by adjusting the inductance and resistance circuit values. In addition, in the experiment, a variable inductor module was used to reduce the vibration occurring at a specific frequency of the cantilever. Finally, based on the results of the finite element analysis and the experiment, it was verified that the piezoelectric shunt can effectively reduce the vibration of the cantilever.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.3
• /
• pp.101-109
• /
• 2012

It is commonly recognized that railway is one of the representative transportation and it offers public service based on strategies for being rapid, automation, safety. Since the opening of high speed railway, 3-hundred-million people have used it and acknowledged its efficiency. However, derailed accident at Kwangmyeong station in February, 2011, frequent malfunction of KTX-Sancheon, and accidents by engineer's careless fault damaged on credibility of safety, Especially, spreaded accidents through social networking service by cell phones amplified anxiety of public, being criticized by the press. This study analyzed statistics of past accident and cases of passing-by accident, and surveyed 152 KTX captain engineers about their recognition of the accident by careless fault and experiences of possibility of occurrence for preventing engineer's careless fault and restoring trust According to the analysis, engineers worry about responsibility and disadvantages related to the accidents for the most, and they are nervous about malfunction for the second most. This study presents prevention methods regarding the result. First, it is required to improve mental stability and concentration on their work, secondly, advanced ability to cope with malfunction or error through repetitive education and training are required to increase confidence, and for the last, improvement of operational supporting system such as ATP, GPS to prevent errors by human factors. Improvement of the system is expected to lead engineers to prevent careless fault and regain the reputation of railway.

• Journal of the Korean Society for Railway
• /
• v.18 no.5
• /
• pp.457-465
• /
• 2015

A method of evaluating the optimal alignment range while considering ride comfort when performing line renewal of curved tracks for speed-up is proposed in this study. The proposed method was applied to analyze the optimal renewal range for horizontal alignments with the smallest curve radii in the Kyung-Bu high-speed line; a parametric study on the effects of various initial design conditions on the permissible renewal range and optimal alignment range was also performed. From the analysis results, it was found that the permissible range is enhanced in proportion to the increase in the curve radius and the cant. It was also verified that a slight adjustment of the horizontal alignment enables speed-up even in the case of R7000/R8000, placed in the ballasted track section of the Kyung-Bu high-speed line.