• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.127-131
• /
• 2008

In the disk braking of the railway trains, kinetic energy of the vehicles is converted into thermal energy by friction between a brake disk and the pad materials. This can be cause of the iterative thermal shock and generates thermal cracks on the brake disk surface. In this study, we show the comparative thermal fatigue test procedures and thermal crack analysis process to evaluate the thermal fatigue characteristics of candidate materials designed for development of heat-resistant brake disk material. We carried out tests on the conventional brake disk materials used for Saemaul and Mugunghwa trains, then we comparatively analyzed the thermal crack initiation and propagation on the surface of a specimen. A thermal fatigue test procedure and a crack analysis process were suggested to evaluate the heat resistance of the developed materials at later studies.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1139-1163
• /
• 2009

Since opening of the high speed railroad in Korea, service result of the last 5 years is commandable. About 236million passengers had taken KTX until February 2009, and number of trains in service per day during week-end increased from 128 to 181, meaning that it's grown about 40%. And MKBSF, one of indicators of the high speed railroad's reliability, registered 680,469Km at the end of the year 2008, witch is 6 times more than 121,000Km, contract base when KTX was introduced. With increasing number of trains in service, not only passengers use the high speed railroad more frequently, but also we assure its reliability through maintenance based on reliability. And actually we gather information concerning all kind of defects occurred during train circulation and then, analyse them, and eradicate their causes in order to improve the high speed railroad's reliability. This paper describes a verification test process to analyse causes of defective function about train's traction.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.203-204
• /
• 2006

We present and demonstrate a novel method of alternate-phase return-to-zero (RZ) signal generation and pulse-amplitude equalization simultaneously in a rational harmonic mode-locked fiber ring laser, using a dual-drive Mach-Zehnder (MZ) modulator. By adjusting the voltages applied to both arms of the modulator, the rational harmonic mode-locked pulse trains are equalized in their amplitudes. In addition to that, the amplitude-equalized pulse trains multiplying the repetition rate at ${\sim}10\;GHz$ have alternate $\pi$ phase difference between adjacent pulses. The alternate-phase RZ signal generated by the proposed method enhances transmission performance through the single-mode fiber (SMF) links without dispersion compensation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1316-1318
• /
• 2004

Tilting train has been developed to increase the operational speed of the trains on conventional lines which have many curves. This train are tilted at curves to compensate for unbalanced carbody centrifugal acceleration to a greater extent than compensation produced by the track cant, so that passengers do not feel centrifugal acceleration and thus trains can run at higher speed at curves. This paper show that results of normal capacity calculations of the electrical equipments such as Main transformer, PWM converter, VVVF inverter, traction motor in TTX(tilting train express) with maximum operation speed 180 km/h

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1625-1627
• /
• 2005

In this paper, equipments arrangements of traction system and electric devices of a double deck train were studied to examine technical reasonableness for driving on the ground and underground. Double deck trains operated in other countries were also considered. For designing the electric devices, two types of accelerations and electric devices arrangements which are based on the current subway system were considered.

• 소음진동
• /
• 제7권4호
• /
• pp.597-604
• /
• 1997

Ground vibrations induced from railroad were measured to get the basic data that can be usde to prepare countermeasures for solving environmental vibration problems. Vibration levels were measured simultaneously at three points in double distances from railroad. These data were analuzed with the kinds of trains, media to understand the magnitudes and characteristics of distance attenuation of railroad vibrations.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.297-304
• /
• 2003

As the high speed rail to be opened at 2004, the. railroad will dominate over the transportation market in the Seoul-Busan corridor compared to road transport. But, it is obvious that the LOS(level of service) of railroad at 2004 will be worse in the areas that are not served KTX. For the speed-up of conventional line, it is a worldwide trend that tilting trains are served on the conventional railway line. That is the reason serving tilting trains is very efficient to use existing facilities and improve cruise time when capacity is available. In this paper, we suggest 10 routes are replaced with present operating trains(saemaeul, mugunghwa) by the tilting train.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.932-935
• /
• 2007

According to Urban Railroad Act, trains can be operated only after they take The Urban Transit Performance Test. There has been Performance Tests for the trains which has been manufactured since 2000, but it is nearly impossible to utilize the Performance Test results other than the original purpose due to the fact that they are not organized in detail, In addition, test steps have difficulty using the former test results. Thus, test results must be computerized and made into database to make the best use of them and to carry out efficient and dependable tests. For this purpose, this paper analyzes the task and the procedure of the performance test on trains. On the basis of the analysis results, this paper checks the availability of the computerized information and the possibility of improving the task concerned

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.250-252
• /
• 2004

The aim of this paper is to provide a guide to those methods of train detection which are available, or are likely to become available, to the designer of train control or other relevant systems. In broad terms, train detection may be defined as the process of generating information which describes the location and movement of trains. Train detection information is difficult to define in isolation. Consider, for example, the train detection information required in a modern train control system. This may vary considerably : in a future high performance train control system, it might be necessary to know the precise position, direction of movement, speed, and possibly even the acceleration or braking, of all trains in the control area : in a less demanding application, it might be sufficient to know only the location of trains in terms of the occupation of sections of track.

• 한국소음진동공학회논문집
• /
• 제20권10호
• /
• pp.968-975
• /
• 2010

The high interest for the ground vibrations which is caused by the train service is risen. When the trains are passed, a serious force is applied to ground and the caused vibration is propagated to the area of the building by the ground and rocks. This vibration comes to feel in the residents with the direct vibration, it is radiated in sound. The caused vibration and radiated sound affect the human's life, and this vibration brings about the operation interruption of the equipment which is sensitive to the vibration, or will bring about the structural damage of the building. In this study, the effect of the vibrations caused by the passing trains on the railway station and buildings is investigated by vibration measurement. Indoor and outdoor measurement is carried out by each trains.