• 한국구조물진단유지관리공학회 논문집
• /
• 제23권1호
• /
• pp.94-101
• /
• 2019

기존 선로구조물의 대부분은 준공된 지 상당한 시일이 경과되어 노후화가 많이 진행된 상태이다. 특히 기존 철도교량 중 판형교는 상당수가 준공으로부터 40~60년 이상 경과된 노후교량이며 도상 없이 거더에 침목이 직결되어 있어서 차량의 주행하중이 교량에 직접 전달되므로 유도상 교량과 비교하여 교량에 가해지는 충격 및 소음이 클 뿐만 아니라 동적인 충격과 진동도 상대적으로 크다. 따라서 기존선 판형교에 대한 적절한 유지관리 및 보수, 보강기술의 개발이 매우 시급하다. 본 연구에서는 기존선 판형교의 성능개선과 소음, 진동 문제 해결을 위해 기개발된 레일매립궤도 시스템의 특징을 소개하고, 레일매립궤도의 진동 및 소음 저감 성능을 평가하기 위해 길이 5m 침목이 설치되어 있는 무도상 판형교와 레일매립궤도를 적용한 판형교를 제작하여 동일한 가진 조건에 따라 발생되는 진동응답을 측정하고 분석하였다. 또한 실험에서 얻은 진동응답 데이터를 음향해석 모델의 입력데이터로 사용하여 방사소음해석을 수행하였다. 실험 및 해석 결과 레일매립궤도를 적용한 판형교가 무도상 판형교 보다 진동에서는 15.0~18.8dB정도 감소하고 소음의 경우 평균 7.7dB(A)정도 감소하는 것으로 확인되었다.

• 소음진동
• /
• 제3권1호
• /
• pp.47-55
• /
• 1993

In order to maintain comfortable life environment around railroad site, noise from train itself, and to train & rail interaction, and the vibration transmitted through the ground should be controlled to the extent of permissible level. In order to achieve this, the basic railroad noise & vibration data such as magnitude and frequency characteristics of them are necessary to establish the counterplan for railroad noise & vibration. In this study, we measured and analysed the characteristics of time variation, frequency, direction and distance attenuation of noise and vibration of the railroad between Seoul and Pusan.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.667-672
• /
• 2007

The source of wayside noise for the train are the aerodynamic noise, wheel/rail noise, and power unit noise. The major source of railway noise is the wheel/rail noise caused by the interaction between the wheels and rails. The Structure borne noise is mainly a low frequency problem. The train noise and vibration nearby the elevated railway make one specific issue. In this paper, the train noise and structure borne noise by train are measured. From the results, we investigated the effect on the sound absorption tunnel for elevated railway.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.743-748
• /
• 2007

The important factor to evaluate the running safety of a railway vehicle would be the interaction force between wheel and rail(derailment coefficient), for which is one of important factors to check the running safety of a railway vehicle that may cause a tragic accident. Especially, a newly developed vehicle that first runs commercially requires necessarily the measurement and evaluation of derailment coefficient for securing the safety of a vehicle while measuring the derailment coefficient in view of securing running safety could be the more important factor than any other factors. In this paper, examined possibility that can forecast derailment possibility to behavior of only vibration and displacement by measuring vibration acceleration and displacement in vehicles that travel actuality rail track, and compares with data of wheel load/lateral force result.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1085-1090
• /
• 2007

In recent railway construction, the concrete slab track is getting highlighted as main stream in track type. However, it is the fact that there are different opinions in selection of the optimized spring coefficient of elastic pad. In this study, the performance of vibration reduction in different stiffness of rail pad for ballasted track was compared, and the changes in characteristics, such as static/dynamic deflection of components, vibration acceleration, insertion loss etc., were analysed by using ISI Program for various types of rail fastening system used in concrete slab track. It was concluded that the fastening system with softer pads has shown the better performance of vibration reduction in concrete slab track and the optimized static stiffness has been calculated to 21.1kN/mm for conventional railways, 17.6kN/mm for high-speed railways and 17.8kN/mm for subways.

• Journal of Mechanical Science and Technology
• /
• 제19권spc1호
• /
• pp.328-335
• /
• 2005

For high speed railway vehicles, we consider a vibration of flexible track/wheel system. It is very important to deal with the complex phenomena of high-speed vehicles that can be occurred in the vertical vibration of the system. From a viewpoint of multibody dynamics, this kind of problem needs accurate analysis because the system includes mutual dynamic behaviors of rigid body and flexible body. The simulation technique for the complex problems is also discussed. We consider the high-speed translation, rail elasticity, elastic supports under the rail and contact rigidity. Eigen value analysis is also completed to verify the mechanism of the coupled vertical vibration of the system.

• 한국소음진동공학회논문집
• /
• 제20권4호
• /
• pp.373-380
• /
• 2010

An interest is increased of environment and energy so, importance on railroad high energy efficiency is magnified. And after Gyeong-bu High speed rail is completed, share rate freight transportation of railroad is expected to be gradually increased due to expand investment for railroad and operate mainly freight transportation on convention line. Therefore a research on DMT freight cars is necessary under like this situation. In paper, we developed analysis model for DMT freight car and DMT freight was analyzed numerically using VI-Rail in each condition of railway having different curve and carried out vibration analysis on curving using developed analysis model. And we carried out test on driving stability follow changing curve radius then measure against UIC code 518.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.285-286
• /
• 2007

This paper presents a robust controller in order to handle the guide rail vibrations of Bridge Inspection System. While a Bridge Inspection Robot moves on guide rails with vibration by weight occurs. Therefore, Guide rail as structure like cantilever beam appears vibration by weight of Bridge Inspection Robot. The Z axis of Bridge Inspection Robot operates with Scissors structure. Bridge Inspection Robot is used 'PID Controller based on Sliding Mode control' for position control with Z axis. At the result of, this paper is applied to simulation about position control regarding vibration to occur with Z axis.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.522-529
• /
• 2006

Running train is one of the most main factor for railway bridge vibration. The repeated forces with equidistant axles cause the magnification of dynamic responses which relates with maintenance of the track structure and structure-borne noises. The noise problem is one of the most important issues in services of light rail transit system which usually passes through towns. The noise of railway bridges can be divided into the noise from track-vehicle system and structure-borne noises. In the present study, The vibration and noise of the LRT bridge will be investigated with utilizing dynamics responses from moving train as input data for noise analysis.

• 한국음향학회지
• /
• 제33권4호
• /
• pp.238-247
• /
• 2014

본 논문에서는 철도 전동 소음의 주요 소음원인 레일 소음의 방사 특성을 이론적으로 해석하고 배열 마이크로폰을 이용한 레일 소음 측정 시 발생하는 현상들에 관해 이론적으로 고찰하였다. 철도 궤도는 국내 고속철도 콘크리트 도상 궤도를 대상으로 하였으며, 레일에 고속의 이동 하중이 작용하는 경우에 대한 진동 및 소음 방사 특성을 해석하였다. 본 연구를 통해 이동 하중이 작용할 때 발생하는 레일의 소음 방사 특성을 파악하였으며, 배열 마이크로폰을 이용한 레일 소음 측정시 빔 각도가 배열 마이크로폰 출력 음압에 중요하게 작용함을 확인하였다. 따라서 배열 마이크로폰을 이용해 레일 소음을 규명하기 위해서는 레일의 방사 특성을 반영한 배열 마이크로폰 빔 각도 설정이 필요함을 이해하였다.